Application
This unit describes the performance outcomes required to analyse and evaluate faults in light marine hull performance and stability systems in order to initiate action to sustain, vary or enhance performance. It involves identifying, evaluating, selecting, justifying and documenting the most appropriate rectification method or variation to the rectification method. The unit includes the analysis of multi-system and intermittent faults which may be caused by operating in adverse conditions.
It applies to those working in the marine service and repair industry on inboard or outboard marine vessels.
No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
Elements and Performance Criteria
Elements Elements describe the essential outcomes. | Performance Criteria Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold and italicised text is used, further information is detailed in the range of conditions section. |
1. Identify and confirm the work requirement | 1.1 Objective of the analysis and evaluation is determined from workplace instructions 1.2 Specifications for light marine hull performance and stability system are sourced and interpreted 1.3 System faults, deficiencies or discrepancies are identified and confirmed 1.4 Hazards associated with the work are identified and risks are managed according to workplace procedures and safety requirements |
2. Prepare for analysis and evaluation | 2.1 Evaluation criteria are developed or adopted to meet the objective of the analysis and evaluation 2.2 Analytical and evaluative methodology is developed or identified from technical information 2.3 Testing equipment is prepared according to manufacturer specifications and workplace procedures 2.4 Tools and materials required to support the diagnostic procedure are identified, selected and prepared for use 2.5 Performance and stability system and components are prepared for the diagnostic process |
3. Carry out failure analysis | 3.1 Selected analytical and evaluative methodology is followed according to manufacturer specifications and workplace procedures 3.2 Tests are carried out according to manufacturer specifications, workplace procedures, and safety and environmental requirements 3.3 Analytical and other diagnostic findings are verified, as required, by using reliable alternative or optional processes 3.4 Analytical findings and results are assessed against evaluation criteria 3.5 Valid conclusions are drawn from available evidence and documented according to workplace requirements |
4. Make recommendations | 4.1 Options for responding to the objective are determined from further research of technical support information 4.2 Rectification method is selected from an analysis of the options, operating conditions, regulatory requirements, Australian Design Rules, and financial implications 4.3 Report is prepared specifying analysis and evaluation process, and detailing and justifying rectification method or variation to the rectification method |
5. Complete work processes | 5.1 Final inspection is made to ensure work is to workplace expectations 5.2 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected 5.3 Tools and equipment are checked and stored according to workplace procedures 5.4 Workplace documentation is processed according to workplace procedures |
Evidence of Performance
Before competency can be determined, individuals must demonstrate they can perform the following according to the standard defined in this unit’s elements, performance criteria, range of conditions and foundation skills:
analyse and evaluate a fault in the hull performance and stability system of three different light marine vessels
the above analysis and evaluation must involve the following:
engine performance and maximum speed
propeller matching
hull integrity.
Evidence of Knowledge
Individuals must be able to demonstrate knowledge of:
work health and safety (WHS) and occupational health and safety (OHS) requirements relating to analysing and evaluating faults in light marine hull performance and stability systems, including procedures for working with rotating shafts and propellers
principles and processes involved in planning and implementing analysis and evaluation of light marine hull performance and stability systems
design and planning of diagnostic procedures of light marine hull performance and stability systems
types, functions, operation and limitations of light marine hull performance and stability systems, including:
marine two-stroke, four-stroke and diesel engines
marine engine installation and rigging techniques to applicable specifications
propeller selection techniques and procedures
boat trimming methods and planning aspects
marine hull performance and design characteristics
vessel systems and their impact on light marine hull performance and stability system operation, including weight distribution of vessel components
testing procedures for light marine hull performance and stability systems, including:
engine performance and maximum speed
propeller matching
hull performance and stability water tests
hull integrity
types, functions, operation and limitations of diagnostic testing equipment required to analyse and evaluate faults in light marine hull performance and stability systems
procedures for documenting and reporting the analysis and evaluation process
requirements of Australian Design Rules (ADRs) relating to light marine hull performance and stability systems.
Assessment Conditions
Assessors must satisfy NVR/AQTF assessor requirements.
Competency is to be assessed in the workplace or a simulated environment that accurately reflects performance in a real workplace setting.
Assessment must include direct observation of tasks.
Where assessment of competency includes third-party evidence, individuals must provide evidence that links them to the light marine performance and stability systems that they have worked on, e.g. repair orders.
Assessors must verify performance evidence through questioning on skills and knowledge to ensure correct interpretation and application.
The following resources must be made available:
marine repair workplace or simulated workplace
workplace instructions
manufacturer hull performance and stability system specifications
three different light marine vessels with faults in the hull performance and stability systems specified in the performance evidence
diagnostic equipment for light marine hull performance and stability systems
tools, equipment and materials appropriate for analysing and evaluating light marine hull performance and stability systems.
Foundation Skills
This section describes those language, literacy, numeracy and employment skills that are essential to performance and are not explicit in the performance criteria.
Skills | Description |
Learning skills to: | apply learning and processes to different situations. |
Reading skills to: | research, organise and interpret technical information relating to light marine performance and stability systems. |
Writing skills to: | legibly and accurately fill out workplace documentation when reporting failure analysis findings document and complete reports. |
Numeracy skills to: | use mathematical ideas and techniques to complete measurements, calculate analytical requirements, calibrate testing equipment and present analytical results. |
Planning and organising skills to: | plan own work requirements and prioritise actions to achieve required outcomes and ensure tasks are completed within workplace timeframes. |
Technology skills to: | use specialised light marine performance and stability diagnostic equipment. |
Range Statement
This section specifies work environments and conditions that may affect performance. Essential operating conditions that may be present (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) are included. Bold italicised wording, if used in the performance criteria, is detailed below.
Safety requirements must include: | work health and safety (WHS) and occupational health and safety (OHS) requirements, including procedures for working with rotating shafts and propellers. |
Analytical and evaluative methodology must include: | diagnostic process, sequence, tests and testing equipment. |
Tests must include: | engine performance and maximum speed propeller matching hull performance and stability water tests hull integrity. |
Sectors
Technical
Competency Field
Marine