• AURT570293A - Analyse and evaluate light vehicle engine and fuel system faults

AURT570293A
Analyse and evaluate light vehicle engine and fuel system faults

This unit covers the competence to analyse and evaluate light vehicle engine and fuel systems in order to initiate action to sustain, vary or enhance performance.

Application

It includes failure analysis covering the complex diagnosis of multi-system and intermittent faults as well as evaluation of performance achievements and variations.

It also requires the candidate to identify, evaluate, select and document the most appropriate response to the stated objective of the analysis and evaluation process.

The unit relates to an automotive technologist or subject matter specialist. It encompasses and builds on trade level competencies.


Elements and Performance Criteria

ELEMENT

PERFORMANCE CRITERIA

1. Identify and confirm the work requirement

1.1. Work instructions and reports are used to determine the nature and objective of the analysis and evaluation requirements.

1.2. Benchmark specifications for correctly functioning light vehicle engines are accessed and interpreted.

1.3. OH&S requirements, including equipment and system isolation requirements and personal protection needs are observed throughout the work.

1.4. Effects of systemic deficiencies/discrepancies or faults are identified and confirmed from indirect and/or direct evidence.

1.5. Possible safety impacts of the work are considered and responded to in accordance with regulatory and enterprise obligations and practices.

2. Prepare for analysis and evaluation

2.1. Evaluative criteria are developed/adopted to meet objectives of the work.

2.2. System performance achievements and/or discrepancies are identified from an analysis of technical support information and available on-board diagnostic systems.

2.3. Analytical and evaluative methodology, including diagnostic process, sequence, tests and testing equipment are developed and/or identified and selected from the range of available options.

2.4. Testing equipment is obtained and prepared for application in accordance with regulatory, manufacturer/component supplier and enterprise requirements.

2.5. Tooling and materials required to support the diagnostic process are identified, selected and prepared for use.

2.6. Light vehicle engine and fuel system components are prepared for the diagnostic process, including park-up, isolation and cleaning requirements.

3. Apply the analysis and evaluative methodology

3.1. Selected analytical and diagnostic process is followed in accordance with specifications and directions and/or the locally authorised method.

3.2. Tests and testing equipment are applied in accordance with regulatory requirements and manufacturer/component supplier specifications.

3.3. Analytical and other diagnostic findings are verified, if necessary, by using reliable alternate or optional processes, and documented.

3.4. Analytical findings and results are evaluated against the agreed criteria.

3.5. Valid conclusions are drawn from the available evidence and documented to enterprise requirements.

3.6. Information and detail related to the analysis and evaluation is provided to the appropriate parties in accordance with regulatory and commercial obligations.

4. Select response measure

4.1. Options for responding to the objective or need are identified from further research of technical support information.

4.2. A response option is selected from an analysis of the options, prevailing circumstance, regulatory requirements and commercial policies.

4.3. Selected response option is documented and reported in accordance with regulatory and enterprise requirements and practices.

5. Restore the workplace

5.1. Materials that can be reused is collected and stored.

5.2. Testing equipment and support materials are cleaned, maintained and prepared ready for further use or stored in accordance with manufacturer/component supplier specifications and enterprise requirements.

5.3. Waste and scrap is removed following workplace procedures.

5.4. Equipment and work area are cleaned and inspected for serviceable condition in accordance with workplace procedures.

5.5. Unserviceable equipment is tagged and faults identified in accordance with workplace procedures.

Required Skills

Required skills

research, organise and understand technical information related to contemporary light vehicle engine and fuel systems, monitoring and testing processes, diagnostic methods and options and safety procedures.

communicate ideas and information to enable confirmation of work requirements and specifications, coordination of work with site supervisor, other workers and customers, reporting of work outcomes and completion of regulatory, commercial and vehicle information systems inputs.

plan and organise activities, including the planning of analytical processes, establishment of evaluative (success) criteria, preparation and layout of the worksite and the obtaining of testing equipment and materials to avoid backtracking, workflow interruptions or wastage.

work with others and in a team by recognising dependencies and using cooperative approaches to optimise workflow and productivity.

use mathematical ideas and techniques to complete measurements, calculate analytical requirements, calibrate and establish testing equipment and present analytical results.

establish analytical processes, including diagnostic processes, which anticipate and allow for risks, cater for both direct and indirect evidence, avoid or minimise reworking and avoid wastage.

use the workplace technology related to systems analysis and diagnosis, information research and management systems, testing equipment, maintenance equipment, tooling, calculators and measuring devices.

Required knowledge

light vehicle terminology and definitions.

general knowledge of the concepts, principles and processes involved in planning and implementing systems analysis and evaluation.

basic electrical theory covering voltage, current, resistance, power, magnetics and inductance.

mechanical theory covering the concepts and principles of mechanical, hydraulic and pneumatic systems.

general knowledge of the types, functions, operations and limitations of light vehicle engines.

detailed knowledge of the types, function, operations and limitations of light vehicle fuel, ignition, intake, exhaust, lubrication, cooling and engine mounting systems/ components.

general knowledge of the theory of diagnosis, including concept, design and planning.

detailed knowledge of the types, functions, operations and limitations of diagnostic testing equipment.

general knowledge of automotive digital computing systems.

general knowledge of the methods and processes for documenting and reporting diagnostic findings and recommendations.

Evidence Required

The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.

Overview of assessment

Critical aspects for assessment and evidence required to demonstrate competency in this unit

Interpret work order and locate and apply information.

Apply safety requirements, including the isolation of equipment and use of personal protective equipment.

Follow work instructions, operating procedures and inspection processes to:

minimise the risk of injury to self and others

prevent damage and wastage of goods, equipment and products

maintain required production output and product quality.

Complete failure analysis on a minimum of three light vehicle engine and fuel systems with real or simulated multi-system and intermittent faults and identify, evaluate, select and document the most appropriate rectification measures.

Analyse and validate or recommend variations to a minimum of two available repair/modification procedures for light vehicle engine and fuel systems.

Document and report the diagnostic process and findings and recommended rectification for two of the above.

Work effectively with others.

Modify activities to cater for variations in workplace context and environment.

Context of, and specific resources for assessment

Assessment may occur on the job or in a workplace simulated facility with process equipment, material, work instructions and deadlines.

Access to a requirement and objectives for analysis and evaluation, light vehicle engine and fuel systems with real or simulated faults, monitoring processes and testing equipment appropriate to the objectives, research facilities and technical information and a work environment.

Method of assessment

Assessment of this unit of competence is most likely to be project related under real or simulated conditions and require portfolios or other forms of indirect evidence of process. Direct evidence may include certification of compliance of the final outcome/product or authorisation for use by a competent authority.

Assessment must confirm the inference that competence is able not only to be satisfied under the particular circumstances, but is able to be transferred to other circumstances.

Competence in this unit may be assessed in conjunction with other functional units which together form part of the holistic work role

Guidance information for assessment


Range Statement

The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.

Failure analysis and evaluation process

The objectives of the failure analysis and evaluation process may determine fault rectification measures, effect variation in system characteristics and parameters or enhancing system performance.

Engine and fuel systems

Engine and fuel systems are to include two-stroke, four-stroke rotary, petrol engine to 8 litres and diesel engine to 8 litres.

Engine and fuel systems to be covered in this unit are to include the engine and related fuel, ignition, intake, exhaust, lubrication and cooling systems. Systems are to include innovative engine design and ceramic engine componentry.

Engine and fuel system failures

Engine and fuel system failures covered by this unit are to include engine (poor performance, excessive oil consumption, engine stoppages), fuel (contamination, flow, pressure, leakage), ignition (no-start, no-run, misfire, erratic operation, lack of power, charging), intake (leakage, noise, vibration, inadequate control, exhaust (pressure, abnormal emissions), lubrication (pressure, flow, leakage, abnormal engine wear, inadequate filtration, sludge formation, excessive deposits, overheating), cooling (overcooling, insufficient cooler flow, coolant out of specification, lack or air flow, internal corrosion), mounting (noise, vibration, hardness, clutch shudder, erratic transmission control).

Engine and fuel system failures covered by this unit are to include indirect faults caused by the influence of external systems which may or may not be faulty in their primary operations.

Unit context

OH&S requirements include vehicle industry regulations, safety management systems, hazardous substances and dangerous goods code and safe operating procedures.

Work is carried out in accordance with legislative obligations, Australian Design Rules, environmental legislation, health regulations, manual handling procedures and organisation insurance requirements.

Work requires individuals to demonstrate research, analytical, judgement and problem-solving skills in the diagnosis of faults.

Evaluative criteria

Evaluative criteria, sometimes referred to as success factors, detail the criteria against which the achievement of the objectives of the analysis judged. They are to include statistically based criteria and may include other measures.

Isolation procedures

Equipment isolation procedures to industry and enterprise standards.

Testing equipment

Testing equipment is to include bore gauges, compression gauges, computer-based diagnostic system (direct and internet), cooling system analyser, dial gauges, exhaust gas analysers, micrometers, multimeter, oscilloscope, pressure gauges, stethoscope, telescopic gauges, temperature gauges, tachometer, timing lights, vacuum gauges, verniers, and may include anemometer, barometer, hygrometer, specific gravity gauge.

Tests

Tests are to include component wear analysis, compression, cylinder leakage, engine performance, exhaust gas sampling, flow, oil consumption, pressure, sample collection/processing, specific gravity, temperature and vacuum.

Personal protective equipment

Personal protective equipment is to include that prescribed under legislation, regulations and enterprise policies and practices.

Information and procedures

Workplace procedures relating to the use of tooling and equipment.

Workplace procedures relating to reporting and communication.

Manufacturer/component supplier specifications and application procedures for testing equipment and materials.

Manufacturer/component supplier specifications, schematics and operational procedures related to light vehicle engine and fuel systems.

Australian Design Rules.

Vehicle industry regulations.

Vehicle industry publications related to emerging steering and suspension system technology and technology changes.


Sectors

Unit sector

Technical


Employability Skills

This unit contains employability skills.


Licensing Information

Not Applicable