Application
This unit describes the performance outcomes required to inspect and service liquefied petroleum gas (LPG) fuel systems. It involves preparing for the task, inspecting the system, reporting the inspection findings, servicing and adjusting the system, and completing workplace processes and documentation.
It applies to those working in the automotive service and repair industry. The LPG fuel systems include those of agricultural machinery, forklifts, heavy commercial vehicles, light vehicles or mobile plant machinery.
Licensing, legislative, regulatory or certification requirements may apply to this unit in some jurisdictions. Users are advised to check with the relevant regulatory authority.
Elements and Performance Criteria
Elements Elements describe the essential outcomes. | Performance Criteria Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold and italicised text is used, further information is detailed in the range of conditions section. |
1. Prepare to inspect and service LPG fuel system | 1.1 Job requirements are determined from workplace instructions 1.2 Servicing information is sourced and interpreted 1.3 Hazards associated with work are identified and risks are managed according to safety and environmental requirements 1.4 Tools, equipment and materials are selected and checked for serviceability |
2. Inspect LPG fuel system | 2.1 Inspection is carried out according to manufacturer specifications, workplace procedures, safety requirements, and AS/NZS 1425 LP Gas fuel systems for vehicle engines 2.2 Inspection results are compared with manufacturer specifications 2.3 Inspection findings are reported according to workplace procedures, including recommendations for necessary repairs or adjustments |
3. Service LPG fuel system | 3.1 Service and adjustments are carried out according to manufacturer specifications, workplace procedures, AS/NZS 1425, and safety and environmental requirements, and without causing damage to components or systems 3.2 Post-service testing is carried out according to workplace procedures |
4. Complete work processes | 4.1 Final inspection is made to ensure work is to workplace expectations and vehicle or system is presented ready for use 4.2 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected 4.3 Tools and equipment are checked and stored according to workplace procedures 4.4 Workplace documentation is processed according to workplace procedures |
Evidence of Performance
Before competency can be determined, individuals must demonstrate they can perform the following according to the standards defined in this unit’s elements, performance criteria, range of conditions and foundation skills:
inspect and service the following liquefied petroleum gas (LPG) fuel systems:
two different light vehicle LPG fuel systems
or
two different heavy commercial vehicle LPG fuel systems
or
two different forklift LPG fuel systems.
Evidence of Knowledge
Individuals must be able to demonstrate knowledge of:
work health and safety (WHS) and occupational health and safety (OHS) requirements relating to inspecting and servicing LPG fuel systems, including procedures for:
working with heavier-than-air flammable gas
avoiding cold burns
storing LPG
environmental requirements, including procedures for preventing loss of gas to atmosphere
licensing requirements for working on LPG systems
identification and function of LPG fuel system components
basic operation of LPG fuel systems
requirements of AS/NZS 1425 LP Gas fuel systems for vehicle engines
inspection procedures for LPG fuel systems according to relevant Australian standards, including:
leakage check
fuel container life
container corrosion and attachment checks
accuracy of the automatic fuel limiter
operation of fuel containment system, including testing automatic fuel shut-off device
fuel control systems, including automatic fuel shut-off device and fuel selector
manual valves
compartment or sub-compartment
filler connection
hydrostatic relief valve
safety valve system
liquids
ground clearances
vehicle identification, including identification markers
service and adjustment procedures for LPG fuel systems, including:
draining oil from converters
checking compliance of fuel system emissions
post-service testing procedures for LPG fuel systems.
Assessment Conditions
Assessors must satisfy NVR/AQTF assessor requirements.
Competency is to be assessed in the workplace or a simulated environment that accurately reflects performance in a real workplace setting.
Assessment must include direct observation of tasks.
Where assessment of competency includes third-party evidence, individuals must provide evidence that links them to the vehicle LPG fuel systems that they have worked on, e.g. repair orders.
Assessors must verify performance evidence through questioning on skills and knowledge to ensure correct interpretation and application.
The following resources must be made available:
automotive repair workplace or simulated workplace
workplace instructions
AS/NZS 1425 LP Gas fuel systems for vehicle engines
manufacturer servicing schedules and vehicle LPG fuel system specifications
vehicles and machinery specified in the performance evidence with operating LPG fuel systems requiring servicing
tools, equipment and materials appropriate for inspecting and servicing LPG fuel systems.
Foundation Skills
This section describes those language, literacy, numeracy and employment skills that are essential to performance and are not explicit in the performance criteria.
Skills | Description |
Learning skills to: | locate appropriate sources of information efficiently. |
Reading skills to: | interpret information from manufacturer and workshop literature when seeking service procedures and specifications relating to LPG fuel systems. |
Writing skills to: | legibly and accurately fill out workplace documentation when reporting inspection findings, making recommendations, and recording parts and material used. |
Oral communication skills to: | clarify instructions report inspection findings and make repair recommendations. |
Numeracy skills to: | use basic mathematical operations, including addition and subtraction, to calculate service schedule intervals. |
Problem solving skills to: | refer problems outside area of responsibility to appropriate person. |
Range Statement
This section specifies work environments and conditions that may affect performance. Essential operating conditions that may be present (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) are included. Bold italicised wording, if used in the performance criteria, is detailed below.
Safety and environmental requirements must include: | work health and safety (WHS) and occupational health and safety (OHS) requirements, including procedures for: working with heavier-than-air flammable gas avoiding cold burns storing LPG environmental requirements, including procedures for preventing loss of gas to atmosphere. |
Sectors
Technical – Alternative Fuels
Competency Field
Mechanical Miscellaneous