Application
Work applies to the clutch systems of motorcycles, light vehicles, heavy commercial vehicles, agricultural equipment, mobile plant and other industrial environments. |
Prerequisites
Not applicable.
Elements and Performance Criteria
ELEMENT | PERFORMANCE CRITERIA |
1. Prepare to inspect and service a clutch system | 1.1. Workplace instructions are used to determine job requirements relating to inspecting and servicing clutch systems 1.2. Workplace health and safety (WHS) requirements are observed and applied throughout the work 1.3. Procedures and information are sourced and interpreted 1.4. Appropriate tools and equipment are selected and prepared |
2. Inspect a clutch system | 2.1. Inspection is carried out according to workplace procedures and manufacturer and component supplier specifications and without causing damage to components or systems 2.2. Inspection results are compared with manufacturer and component supplier specifications 2.3. Inspection findings are reported according to workplace procedures, including recommendations for necessary repairs or adjustments |
3. Service a clutch system | 3.1. Service options are analysed and those most appropriate to the circumstances are selected 3.2. Appropriate tools, techniques and materials are selected and prepared 3.3. Service and adjustments are carried out according to workplace procedures and manufacturer and component supplier specifications and without causing damage to components or systems |
4. Clean up work area and finalise work processes | 4.1. Final inspection is made to ensure work is to workplace expectations and vehicle is presented ready for use 4.2. Tools and equipment are checked and stored according to workplace expectations 4.3. Service schedule documentation is completed according to workplace procedures |
Required Skills
Required skills |
communication skills to: clarify workplace instructions and determine job requirements gain information from appropriate persons and assistance as required learning skills to identify sources of information, assistance and expert knowledge literacy skills to read, interpret and follow information on written job instructions, specifications, standard operating procedures, charts, lists, drawings and other applicable reference documents follow workplace documentation, such as codes of practice or operating procedures document work performed during inspection and servicing operations numeracy skills to assess tolerances and apply accurate measurements and adjustments planning and organising skills to ensure tasks are completed within an acceptable timeframe problem-solving skills to seek information and assistance as required to solve problems self-management skills to: select and use appropriate equipment, materials, processes and procedures follow workplace documentation, such as codes of practice or operating procedures teamwork skills to apply knowledge of own role to complete activities efficiently to support team activities and tasks technical skills to use workplace tools and equipment relating to the inspection and servicing of clutch systems technology skills to use technology to collect and provide information. |
Required knowledge |
WHS regulations, requirements, equipment and material, and personal safety requirements operating principles of clutch systems methods of sourcing information relevant to inspecting and servicing clutch inspection procedures for clutch systems inspection procedures for clutch systems service procedures for clutch systems |
Evidence Required
The evidence guide provides advice on assessment and must be read in conjunction with the Performance Criteria, required Skills and Knowledge, the Range Statement and the Assessment Guidelines for the Training Package. | |
Overview of assessment | |
Critical aspects for assessment and evidence required to demonstrate competency in this unit | The evidence required to demonstrate competency in this unit must be relevant to workplace operations and satisfy all of the requirements of the performance criteria and required skills and knowledge. A person who demonstrates competency in this unit must be able to: observe safety procedures and requirements select methods and techniques appropriate to the circumstances inspect and service a range of clutch systems according to workplace, manufacturer and component supplier requirements present vehicle in a condition that complies with workplace requirements. |
Context of, and specific resources for assessment | Competency is to be assessed in the workplace or a simulated workplace environment that accurately reflects performance in a real workplace setting. Assessment is to occur: using standard workplace practices and procedures following safety requirements applying environmental constraints. Assessment is to comply with relevant: regulatory requirements Australian standards industry codes of practice. The following resources must be made available for the assessment of this unit: workplace location or simulated workplace vehicles relevant to the qualification being sought tools and equipment appropriate for the inspection and servicing of clutch systems specifications and workplace instructions. |
Method of assessment | Assessment must satisfy the endorsed Assessment Guidelines of this Training Package. Assessment methods must confirm consistency and accuracy of performance (over time and in a range of workplace relevant contexts) together with the application of required skills and knowledge. Assessment methods must be by direct observation of tasks and include questioning on required skills and knowledge to ensure correct interpretation and application. Competence in this unit may be assessed in conjunction with other units which together form part of a holistic work role. Where applicable, reasonable adjustment must be made to work environments and training situations to accommodate the needs of diverse clients. Assessment processes and techniques must be culturally sensitive and appropriate to the language, literacy and numeracy capacity of the candidate and the work being performed. |
Range Statement
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included. | |
Workplace instructions | computer-generated instructions verbal instructions written instructions. |
Job requirements may include: | clutch system inspection and servicing methods, processes and equipment. |
Clutch systems may include: | dry single or multi-plate clutch wet multi-plate clutch cable operated clutch hydraulically-operated clutch mechanically operated clutch. |
Workplace health and safety (WHS) requirements: | are those prescribed under legislation, regulations, codes of practice, and workplace policies and procedures may include: protective clothing and equipment use of tools and equipment handling of material use of fire-fighting equipment first aid equipment hazard control, including control of hazardous materials and toxic substances. |
Procedures and information may include: | safe work procedures relating to the inspection and servicing of clutch systems verbal, written and graphical instructions signage work schedules, plans and specifications work bulletins or memos material safety data sheets (MSDS) diagrams or sketches regulatory and legislative requirements relating to the automotive industry Australian Design Rules engineer's design specifications and instructions organisation work specifications and requirements instructions issued by authorised enterprise or external persons Australian Standards vehicle service requirements and repair manuals. |
Service options may include: | clutch fluid replacement adjustments and operational testing. |
Final inspection may include: | final check of vehicle fluid levels checking of clutch system operation during mobile or stationary tests cleaning of vehicle. |
Service schedule documentation may include: | vehicle service book job card or work order workplace computerised or written customer records and invoice. |
Sectors
Mechanical Miscellaneous | |
Unit sector | Technical - Transmission |
Employability Skills
This unit contains employability skills. |
Licensing Information
Not applicable.