Application
This unit describes the performance outcomes required to remove and install rubber glazed windscreens on a range of vehicles. It involves preparing for the task, selecting and using specialist tools and equipment according to removal and installation procedures, applying rubber sealants and adhesives according to manufacturer specifications, cleaning and finishing the windscreen, and completing workplace processes and documentation.
It applies to those working in the automotive glazing service and repair industry.
No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
Elements and Performance Criteria
Elements Elements describe the essential outcomes. | Performance Criteria Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold and italicised text is used, further information is detailed in the range of conditions section. |
1. Prepare to remove and install rubber glazed windscreen | 1.1 Job requirements are determined from workplace instructions 1.2 Removal and installation information is accessed and interpreted from windscreen and vehicle manufacturer specifications, workplace procedures, and sealant and adhesive safety data sheets (SDS) 1.3 Work is planned to minimise waste and use time efficiently 1.4 Vehicle is inspected to ensure there is no prior damage and that all related accessories are operating correctly 1.5 Glazing materials, including windscreens, are selected according to windscreen and vehicle manufacturer specifications, and are inspected for quality 1.6 Hazards associated with the work are identified and risks are managed 1.7 Tools and equipment are selected and checked for serviceability 1.8 Vehicle is protected and safely located according to workplace procedures |
2. Carry out removal and installation activities | 2.1 Windscreen is removed according to manufacturer specifications, and safety and environmental requirements, and without causing damage to vehicle or components 2.2 Replacement windscreen is installed, sealed and finished according to manufacturer specifications and safety and environmental requirements 2.3 Adhesive is cured according to adhesive manufacturer specifications and timelines, as required |
3. Complete work processes | 3.1 Final inspection is made to ensure work meets workplace expectations, related accessories are operating correctly, and vehicle is presented ready for use 3.2 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored 3.3 Tools and equipment are checked, reported if faulty, and stored according to workplace procedures 3.4 Workplace documentation is processed according to workplace procedures |
Evidence of Performance
Before competency can be determined, individuals must demonstrate they can perform the following according to the standard defined in this unit’s elements, performance criteria, range of conditions and foundation skills:
remove and install rubber glazed windscreens on two different vehicles.
Evidence of Knowledge
Individuals must be able to demonstrate knowledge of:
work health and safety (WHS) and occupational health and safety (OHS) requirements relating to removing and installing rubber glazed windscreens, including procedures for:
selecting and using personal protective equipment (PPE)
using safety data sheets (SDS) for sealants and adhesives
material handling and storage
environmental requirements, including procedures for trapping, storing and disposing of waste materials and chemicals
location and content of windscreen, vehicle manufacturer, and specific workplace technical specifications
removal and installation methods and workplace procedures for rubber glazed windscreens, including:
types and use of windscreen specialist tools and equipment
windscreen handling techniques
removal methods
sealing methods
cleaning methods
procedures for protecting vehicle and components during windscreen removal and installation
procedures for final inspection of fitted rubber glazed windscreens.
Assessment Conditions
Assessors must satisfy NVR/AQTF assessor requirements.
Competency is to be assessed in the workplace or a simulated environment that accurately reflects performance in a real workplace setting.
Assessment must include direct observation of task.
Where assessment of competency includes third-party evidence, individuals must provide evidence that links them to the rubber glazed windscreens they have removed and installed, e.g. work orders.
Assessors must verify performance evidence through questioning on skills and knowledge to ensure correct interpretation and application.
The following resources must be made available:
automotive glazing workplace, off-site workplace location or simulated workplace
workplace instructions
SDS for sealants and adhesives
PPE required to remove and install rubber glazed windscreens
vehicle manufacturer, windscreen supplier, and workplace technical specifications
two different vehicles or frames requiring a windscreen to be removed and fitted using rubber glazed methods
vehicle protection covers
glass cleaning materials
tools, equipment and materials appropriate for removing and installing rubber glazed windscreens.
Foundation Skills
This section describes those language, literacy, numeracy and employment skills that are essential to performance and are not explicit in the performance criteria.
Skills | Description |
Learning skills to: | locate appropriate sources of information efficiently. |
Writing skills to: | legibly and accurately fill out workplace documentation. |
Oral communication skills to: | clarify instructions and procedures clearly report issues or outcomes. |
Numeracy skills to: | interpret numerical information in specifications, and record it accurately. |
Planning and organising skills to: | plan own work requirements and prioritise actions to achieve required outcomes and ensure tasks are completed within workplace timeframes. |
Technology skills to: | use specialist removal and installation equipment. |
Range Statement
This section specifies work environments and conditions that may affect performance. Essential operating conditions that may be present (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) are included. Bold italicised wording, if used in the performance criteria, is detailed below.
Materials must include: | rubbers sealing compounds solvents and glass cleaning materials. |
Tools and equipment must | personal protective equipment (PPE) specialised hand tools and equipment for removing rubber glazed windscreens. |
Safety and environmental requirements must include: | work health and safety (WHS) and occupational health and safety (OHS) requirements, including procedures for: selecting and using PPE using SDS for sealants and adhesives material handling and storage environmental requirements, including procedures for trapping, storing and disposing of waste materials and chemicals. |
Sectors
Technical - Glazing
Competency Field
Vehicle Body