This unit involves the skills and knowledge required to apply and monitor aviation workplace security procedures, in compliance with relevant regulatory requirements of the Civil Aviation Safety Authority (CASA) and national operating standards.

This includes checking and monitoring personnel and goods entering a worksite, carrying out surveillance of work areas, dealing and writing reports on security incidents/emergencies, and completing required documentation.

This unit addresses aviation non-technical skill requirements (mental, social and personal-management abilities) related to aviation security duties of aviation personnel, and contributes to safe and effective performance in complex aviation operational environments.

Operations are conducted as part of recreational, commercial and military aircraft activities across a variety of operational contexts within the Australian aviation industry.

Work is performed independently or under limited supervision as a single operator or within a team environment.

Licensing, legislative, regulatory or certification requirements are applicable to this unit.

Use for Defence Aviation is to be in accordance with relevant Defence Orders, Instructions, Publications and Regulations.

ELEMENTS

PERFORMANCE CRITERIA

Elements describe the essential outcomes.

Performance criteria describe the performance needed to demonstrate achievement of the element.

1

Check and monitor personnel and goods entering a worksite

1.1

Entry and/or exit of personnel and vehicles are checked to prevent improper entry or unlawful removal of goods and cargo, in accordance with workplace operational procedures and statutory authority regulations

1.2

Potential breaches of security that may cause goods to be at risk are observed and reported promptly to designated personnel in accordance with workplace procedures

2

Carry out surveillance of work areas

2.1

Surveillance of work areas is undertaken in accordance with workplace procedures and regulatory requirements

2.2

Breaches of security are identified, action is initiated and/or incident is reported in accordance with workplace procedures and regulatory requirements

3

Deal with and write reports on security incidents/emergencies

3.1

Security incidents/emergencies are dealt with in accordance with regulations and site operational procedures

3.2

Appropriate police/security/emergency services are contacted, as required, in accordance with workplace procedures

3.3

Intended message is effectively communicated in written reports of incidents/emergencies, in accordance with workplace requirements

4

Complete required documentation

4.1

Surveillance documentation and report requirements are confirmed

4.2

Surveillance documentation and reports are completed and files are despatched in accordance with workplace procedures and regulatory requirements

Evidence required to demonstrate competence in this unit must be relevant to and satisfy all of the requirements of the elements, performance criteria and range of conditions on at least one occasion and include:

adapting to differences in equipment in accordance with standard operating procedures

applying precautions and required action to minimise, control or eliminate identified hazards

applying relevant legislation and workplace procedures

communicating effectively with others

identifying and correctly using relevant equipment

implementing contingency plans

implementing work health and safety (WHS)/occupational health and safety (OHS) procedures and relevant regulations

interpreting and following operational instructions and prioritising work

modifying activities depending on operational contingencies, risk situations and environments

monitoring work activities in terms of planned schedule

planning own work, predicting consequences and identifying improvements

reading, interpreting and following relevant regulations, instructions, procedures, information and signs

receiving, acknowledging and sending messages with available communications equipment

reporting and/or rectifying problems, faults or malfunctions promptly, in accordance with workplace procedures

responding appropriately to cultural differences in the workplace

selecting and using required personal protective equipment conforming to industry and WHS/OHS standards

working collaboratively with others

working systematically with required attention to detail without injury to self or others, or damage to goods or equipment.

Evidence required to demonstrate competence in this unit must be relevant to and satisfy all of the requirements of the elements, performance criteria and range of conditions and include knowledge of:

Australian and international codes and regulations relevant to security arrangements when transferring aviation cargo, freight and mail

focus of operation of work systems, equipment, management and site operating systems for securely transferring cargo, freight and mail

marking and numbering systems for aviation cargo, freight and mail

relevant bond, quarantine or other legislative requirements

relevant WHS/OHS and environmental protection procedures and guidelines

security problems that may occur when transferring aviation cargo, freight and mail and appropriate action that can be taken to resolve or avoid these problems

site layout and operating procedures

types of hazardous aviation cargo and special handling procedures

workplace security procedures and policies for transferring aviation cargo, freight and mail.

As a minimum, assessors must satisfy applicable regulatory requirements, which include requirements in the Standards for Registered Training Organisations current at the time of assessment.

As a minimum, assessment must satisfy applicable regulatory requirements, which include requirements in the Standards for Registered Training Organisations current at the time of assessment.

Assessment processes and techniques must be appropriate to the language, literacy and numeracy requirements of the work being performed and the needs of the candidate.

Assessment must occur in workplace operational situations. Where this is not appropriate, assessment must occur in simulated workplace operational situations that reflect workplace conditions.

Resources for assessment must include access to:

a range of relevant exercises, case studies and/or simulations

acceptable means of simulation assessment

applicable documentation including workplace procedures, regulations, codes of practice and operation manuals

relevant materials, tools, equipment and personal protective equipment currently used in industry.

Range is restricted to essential operating conditions and any other variables essential to the work environment.

Surveillance must include one or more of the following:

authorisation of personnel and property to be in a secured area

safety and security of buildings, gates and perimeter fence

safety of customers, visitors and contractors

security of monies, premises and equipment