AVIW5022
Coordinate the removal of disabled aircraft


Application

This unit involves the skills and knowledge required to coordinate the removal of disabled aircraft, in compliance with relevant regulatory requirements of the Civil Aviation Safety Authority (CASA) and national operating standards.

It includes coordinating aircraft recovery resources, maintaining operational facilities, and documenting and recording the removal process.

This unit addresses aviation technical skill requirements (physical, mental and task-management abilities) related to equipment and system operations of ground operations personnel, and contributes to safe and effective performance in complex aviation operational environments.

Operations are conducted as part of recreational, commercial and military aircraft activities across a variety of operational contexts within the Australian aviation industry.

Work is performed independently or under limited supervision as a single operator or within a team environment.

Licensing, legislative, regulatory or certification requirements are applicable to this unit.

Use for Defence Aviation is to be in accordance with relevant Defence Orders, Instructions, Publications and Regulations.


Elements and Performance Criteria

ELEMENTS

PERFORMANCE CRITERIA

Elements describe the essential outcomes.

Performance criteria describe the performance needed to demonstrate achievement of the element.

1

Coordinate aircraft recovery resources

1.1

Appropriate clearances are obtained prior to removal process

1.2

Established removal procedures are followed

1.3

Removal activities are coordinated with aircraft owner and relevant regulatory bodies

1.4

Need for recovery equipment is determined and its source is identified

1.5

Aircraft escort services on airside are provided as required

1.6

Obstacle restriction areas are avoided or made safe in accordance with workplace policy and procedures

1.7

Signs and notices are complied with

1.8

Hazards are identified, risks are assessed and hazard management is implemented

1.9

Airport organisations and others likely to be affected by the removal are notified

1.10

Appropriate aircraft recovery location is identified and route to that location is established

2

Maintain operational facilities

2.1

Serviceability inspections are conducted to determine areas that may be restored to operational service

2.2

Infringement of obstacle limitation surfaces (OLS) and any changes to declared distances are determined

2.3

Visual aids are provided, installed and removed at completion of aircraft recovery

2.4

Emergency response procedures are implemented as required

2.5

Notice to Airmen (NOTAM) action is initiated and cancelled as required to support aircraft recovery

3

Document and record removal process

3.1

Records of meetings are taken as required

3.2

Visual recording of removal process is conducted where access allows

3.3

Appropriate logbook entries are made

3.4

Incident or aircraft recovery reports are prepared and processed

Evidence of Performance

Evidence required to demonstrate competence in this unit must be relevant to and satisfy all of the requirements of the elements, performance criteria and range of conditions on at least one occasion and include:

applying precautions and required action to minimise, control or eliminate identified hazards

applying relevant legislation and workplace procedures

calculating declared distances defined by regulation

communicating effectively with others

completing relevant documentation

conducting serviceability inspections of aerodrome and obstacle limitation surfaces

implementing contingency plans

implementing work health and safety (WHS)/occupational health and safety (OHS) procedures and relevant regulations

interpreting and following operational instructions and prioritising work

modifying activities depending on workplace contingencies, situations and environments

monitoring and anticipating operational problems and hazards and taking appropriate action

monitoring work activities in terms of planned schedule

operating electronic communications equipment to required protocol

reading, interpreting and following relevant regulations, instructions, procedures, information and signs

reporting and/or rectifying problems, faults or malfunctions promptly, in accordance with workplace procedures

responding appropriately to cultural differences in the workplace

selecting and using required personal protective clothing and equipment conforming to industry and WHS/OHS standards

working collaboratively with others

working systematically with required attention to detail without injury to self, others, or damage to goods or equipment.


Evidence of Knowledge

Evidence required to demonstrate competence in this unit must be relevant to and satisfy all of the requirements of the elements, performance criteria and range of conditions and include knowledge of:

aerodrome serviceability standards

communications equipment checks

declared distances for aircraft operations

declared WHS/OHS and environmental procedures and regulations

emergency procedures

obstacle limitation surfaces applicable to that aerodrome

procedures for making movement and obstacle restriction areas safe:

closing movement area (aerodrome closure)

contacting aerodrome users

extinguishing lighting in hazardous section of movement area

marking unserviceable area by day or night

partial closure of movement area

reporting aerodrome closures, lighting and obstacle limitations/restrictions by Notice to Airmen (NOTAM)

procedures for managing and controlling hazardous situations when carrying out work activities

procedures for operating electronic communications equipment

procedures for facilitation of disabled aircraft removal:

coordination of the removal of the disabled aircraft including returning the aerodrome to operational serviceability notification of aircraft owner

notification of regulatory authorities

relevant authorities for access and reporting purposes:

aerodrome operator or delegated person

aerodrome users aircraft owner

air traffic control (ATC)

Australian Defence Forces Command for military bases

Australian Transport Safety Bureau (ATSB)

Civil Aviation Safety Authority (CASA)

Department of Transport and Regional Services (DOTARS)

NOTAM Office (Airservices Australia)

state/territory and federal police

relevant information/documents:

aerodrome manuals

airline timetables

En Route Supplement Australia (ERSA)

induction and training manuals

Manual of Standards – Aerodromes (Part 139)

workplace operating procedures manual

relevant requirements, standards and recommended practices of the International Civil Aviation Organisation (ICAO) for airport reporting

relevant sections of Civil Aviation Safety Regulations (CASRs) and Civil Aviation Orders for inspecting aerodromes

relevant sections of national and state or territory licensing and regulatory requirements

requirements for completing relevant documentation

standard operating procedures (SOPs) for removing disabled aircraft

steps involved in planning work activities

types and uses of visual aids

types of removal equipment available

typical defects that can occur and related action that should be taken

visual inspection procedures.


Assessment Conditions

As a minimum, assessors must satisfy applicable regulatory requirements, which include requirements in the Standards for Registered Training Organisations current at the time of assessment.

As a minimum, assessment must satisfy applicable regulatory requirements, which include requirements in the Standards for Registered Training Organisations current at the time of assessment.

Assessment must occur in workplace operational situations. Where this is not appropriate, assessment must occur in simulated workplace operational situations that reflect workplace conditions.

Assessment processes and techniques must be appropriate to the language, literacy and numeracy requirements of the work being performed and the needs of the candidate.

Resources for assessment must include access to:

a range of relevant exercises, case studies and/or simulations

acceptable means of simulation assessment

applicable documentation including workplace procedures, regulations, codes of practice and operation manuals

relevant materials, tools, equipment and personal protective equipment currently used in industry.


Foundation Skills

Foundation skills essential to performance are explicit in the performance criteria of this unit of competency.


Range Statement

Range is restricted to essential operating conditions and any other variables essential to the work environment.

Obstacle restriction areas must include one or more of the following:

clearways

runway end safety areas

runway strips

taxiway strips

Visual aids must include one or more of he following:

aerodrome lighting

markers and markings

signal circles

wind indicator

Signs and notices must include one or more of the following:

authorised entry

hazard warnings

limited access

movement area guidance signs

no smoking

speed restrictions

underground electrical reticulation

Hazards must include one or more of the following:

bird or animal activity

changes or loss of runway surface frictional characteristics

disabled aircraft, vehicles and equipment and associated debris

excessive loose materials

flooding

fuel and oil spills

loss of runway shape

loss of visibility of markings

potholes or cracks

runway edge fretting

stripping

unsatisfactory pavement bearing capacity

Serviceability inspections must include:

displaced threshold markers

dumb bell markers

glider markers

signal circle markers

unserviceability cones

unserviceability cross markers

unserviceability lighting

Emergency response procedures must include one or more of the following:

implementing aerodrome emergency procedures

reporting to the Australian Transport Safety Bureau

reporting to local police service


Sectors

Not applicable.


Competency Field

W – Equipment and Systems Operations