AVIY5035
Conduct a 2D very high frequency omni-directional radio range instrument approach


Application

This unit involves the skills and knowledge required to conduct a 2D instrument approach using the very high frequency (VHF) omni-directional radio range (VOR) or VOR/distance measuring equipment (DME) approach procedure, in compliance with relevant regulatory requirements of the Civil Aviation Safety Authority (CASA) and national operating standards.

It includes selecting approach and determining applicable minima, and monitoring aid signal integrity. It also includes conducting initial approach, holding pattern, instrument approach and missed approach procedures.

This unit addresses aviation technical skill requirements (physical, mental and task-management abilities) related to aircraft operational duties of flight crew, and contributes to safe and effective performance in complex aviation operational environments.

Operations are conducted as part of recreational, commercial and military aircraft activities across a variety of operational contexts within the Australian aviation industry.

Work is performed independently or under limited supervision within a single-pilot or multi-crew environment.

Licensing, legislative, regulatory or certification requirements are applicable to this unit.

Use for Defence Aviation is to be in accordance with relevant Defence Orders, Instructions, Publications and Regulations.


Elements and Performance Criteria

ELEMENTS

PERFORMANCE CRITERIA

Elements describe the essential outcomes.

Performance criteria describe the performance needed to demonstrate achievement of the element.

1

Select approach and determine applicable minima

1.1

Current instrument approach and landing (IAL) chart for the VOR approach to be flown is selected

1.2

IAL is reviewed and briefed to flight crew in relation to directing entry to the approach, lowest safe altitude (LSALT) or minimum safe altitude (MSA) is maintained prior to entry approach, and tracks, distances, timing and descent limitations are maintained for the approach

1.3

Fuel availability and latest divert time procedures are enacted as required

2

Monitor aid signal integrity

2.1

VOR to be used for selected approach is tuned and identified

2.2

Warning flags and course deviation indicators (CDI) are monitored throughout selected approach to ensure signal integrity

3

Conduct initial approach

3.1

Altimeter is set to appropriate QNH

3.2

Aircraft is manoeuvred to holding fix on an inbound track and at or above route MSA or LSALT is maintained in accordance with aeronautical information publication (AIP) requirements, using the VOR

4

Conduct holding pattern

4.1

Aircraft holding pattern from the holding fix at or above LSALT or MSA is entered in accordance with specified sector entry

4.2

Holding pattern is performed in accordance with AIP, using the VOR

5

Conduct instrument approach procedure

5.1

Altimeter QNH is updated and set prior to approach commencement

5.2

Instrument approach is conducted in accordance with tolerances specified in AIP using the VOR or VOR/ DME

5.3

Landing runway is identified

5.4

After establishing visual reference, a visual circling or runway approach is conducted for a landing on selected runway, in accordance with AIP

6

Conduct missed approach procedure

6.1

Conditions requiring a missed approach are recognised and missed approach is initiated

6.2

Aircraft is manoeuvred to missed approach point (MAPt)

6.3

Missed approach procedure is conducted in accordance with the IAL chart

6.4

Obstacle clearance in instrument meteorological conditions (IMC) is maintained

Evidence of Performance

Evidence required to demonstrate competence in this unit must be relevant to and satisfy all of the requirements of the elements and performance criteria on at least one occasion and include:

adapting to differences in equipment and operating environment in accordance with standard operating procedures

applying precautions and required action to minimise, control or eliminate identified hazards

applying relevant aeronautical knowledge

applying relevant legislation and workplace procedures

communicating effectively with others

completing relevant documentation

determining conditions permitting descent below minima

determining VHF omni-directional radio range (VOR) or VOR/distance measuring equipment (DME) approach procedure applicable minima for aircraft

identifying and correctly using relevant equipment

implementing contingency plans

implementing work health and safety (WHS)/occupational health and safety (OHS) procedures and relevant regulations

interpreting VOR or VOR/DME instrument approach procedure chart

modifying activities dependent on differing workplace contingencies, situations and environments

monitoring and anticipating operational problems and hazards and taking appropriate action

monitoring work activities in terms of planned schedule

operating electronic communications equipment to required protocol

performing systematic scan techniques

reading, interpreting and following relevant regulations, instructions, procedures, information and signs

reporting and/or rectifying identified problems promptly, in accordance with regulatory requirements and workplace procedures

selecting and using required personal protective clothing and equipment conforming to industry and WHS/OHS standards

setting local or area barometric pressure adjusted for sea level (QNH) at appropriate stages of flight

working collaboratively with others

working systematically with required attention to detail without injury to self or others, or damage to goods or equipment.


Evidence of Knowledge

Evidence required to demonstrate competence in this unit must be relevant to and satisfy all of the requirements of the elements and performance criteria and include knowledge of:

2D instrument approach procedures and limitations:

initial approach

holding pattern

instrument approach procedure

missed approach procedures

instrument approach procedures and limitations

abnormal operations and/or emergency procedures for a VOR or VOR/DME approach, including navigation aid failure

aid signal integrity monitoring techniques

CASR Part 61 Manual of Standards Schedule 3 Aeronautical Knowledge relevant to instrument flight operations

emergency procedures

full scale range on the CDI for a LLZ

how to configure the course deviation indicator (CDI) to achieve command guidance prior to conducting a back course localiser (LLZ) approach

how to operate electronic communications equipment

loss of radio communication during a VOR or VOR/DME approach procedure

minimum obstacle clearance criteria during a VOR or VOR/DME approach procedure/missed approach procedure

navigation aid that provides track guidance for a LLZ approach

procedure for joining the circuit from a VOR or VOR/DME approach procedure

procedures for adjusting controls to optimise equipment operation

procedures for managing and controlling hazardous situations

radio procedures for a VOR or VOR/DME approach

relevant sections of national and state or territory regulatory requirements and codes of practice

relevant WHS/OHS and environmental procedures and regulations

requirements for completing relevant documentation

sector entry join procedures for entering the holding pattern of the VOR or VOR/DME approach

sources of information on differences in equipment and related standard operating and servicing procedures

steps involved in planning the work activities

tracking tolerance and altitude limitations for flying the published DME arc of a VOR or VOR/DME approach procedure.


Assessment Conditions

As a minimum, assessors must satisfy applicable regulatory requirements, which include requirements in the Standards for Registered Training Organisations current at the time of assessment.

As a minimum, assessment must satisfy applicable regulatory requirements, which include requirements in the Standards for Registered Training Organisations current at the time of assessment.

Assessment processes and techniques must be appropriate to the language, literacy and numeracy requirements of the work being performed and the needs of the candidate.

Assessment must occur in workplace operational situations. Where this is not appropriate, assessment must occur in simulated workplace operational situations that reflect workplace conditions.

Resources for assessment must include access to:

a range of relevant exercises, case studies and/or simulations

acceptable means of simulation assessment

applicable documentation including workplace procedures, regulations, codes of practice and operation manuals

relevant materials, tools, equipment and personal protective equipment currently used in industry.


Foundation Skills

Foundation skills essential to performance are explicit in the performance criteria of this unit of competency.


Range Statement

Range is restricted to essential operating conditions and any other variables essential to the work environment.


Sectors

Not applicable.


Competency Field

Y – Aircraft Operation and Traffic Management