- BSBOHS303B - Contribute to OHS hazard identification and risk assessment
BSBOHS303B
Contribute to OHS hazard identification and risk assessment
Application
This unit applies to individuals who assist OHS specialists in relation to the identification of workplace hazards and assessment of OHS risks in the workplace. |
Elements and Performance Criteria
ELEMENT | PERFORMANCE CRITERIA |
1. Contribute to workplace hazard identification | 1.1. Contribute to the selection of hazard identification tools, techniques, processes and methods suitable for the workplace 1.2. Access hazard identification tools, techniques processes and methods to identify hazards in the workplace 1.3. Recognise hazards in the workplace, report these hazards to designated personnel and record them in accordance with workplace procedures 1.4. Provide information and assistance to persons conducting workplace inspections or testing |
2. Gather information about workplace hazards | 2.1. Research, collect and record information about OHS hazards and their associated risks 2.2. Seek additional information, expertise or specialist advice from within or external to the workplace when limit of own skills and knowledge is reached 2.3. Conduct a workplace inspection to collect further information about OHS hazards and associated risks if required 2.4. Contribute to the support of OHS practitioners and employees in accessing workplace sources of information and data regarding hazard identification 2.5. Contribute to the support of OHS practitioners and employees accessing external sources of information and data related to hazard identification, where required |
3. Contribute to OHS risk assessment | 3.1. Use appropriate risk assessment tools to contribute to risk assessment 3.2. Identify, categorise and assess risk factors as a contribution to overall risk assessment 3.3. Seek additional information, expertise, or specialist advice to investigate the likelihood and consequence of identified risks 3.4. Document outcomes of the risk assessment process in a risk register |
Required Skills
|
Required skills |
research skills to investigate the effectiveness of workplace practices and processes, to review workplace practices, processes and data, and to draw relevant inferences literacy skills to prepare summary reports and memos for a range of target groups including: employees OHS committees OHS representatives managers supervisors organisational and time management skills to sequence tasks and meet timelines communication skills to contribute effectively on hazard identification risk assessment processes. |
Required knowledge |
appropriate methods for data collection basic principles of incident causation and injury processes concepts of risks, factors that affect risk and difference between a hazard and a risk consequences and likelihood of risks associated with hazards in the workplace formal and informal communication processes internal and external sources for OHS information and data key personnel in the workplace legislative requirements for: consultation and communication information and data collection notification of incidents record keeping reporting of incidents specific hazards limitations and subjectivity of generic hazard and risk checklists, and risk ranking processes nature of workplace processes and hazards relevant to the workplace organisational culture as it impacts on the workgroup organisational design and structure organisational policies and procedures regarding OHS relevant state/territory/commonwealth OHS legislation, codes of practice, standards and guidance material types and characteristics of major physical, chemical, biological, radiological, nuclear mechanical, psychosocial and environmental hazards which may be present in the workplace types of hazard registers. |
Evidence Required
The Evidence Guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package. | |
Overview of assessment | |
Critical aspects for assessment and evidence required to demonstrate competency in this unit | Evidence of the following is essential: collection of information about workplace hazards and contribution to the identification of hazards in a workplace contribution to a risk assessment for hazards identified in the workplace knowledge of relevant state/territory/ commonwealth OHS legislation, codes of practice, standards and guidance material. |
Context of and specific resources for assessment | Assessment must ensure: access to relevant information on compliance requirements such as: organisational policies, standard operating procedures, procedures and plans relevant legislation, regulations, licensing requirements, codes of practice, standards access to relevant internal and external data files access to appropriate computer resources needed for the management of identification and rectification of breaches in compliance requirements. |
Method of assessment | A range of assessment methods should be used to assess practical skills and knowledge. The following examples are appropriate for this unit: analysis of responses to case studies and scenarios demonstration of the application of hazard identification and risk assessment techniques in the workplace direct questioning combined with review of portfolios of evidence and third party reports of on-the-job performance by the candidate oral or written questioning to assess knowledge of consequences and likelihood of risks associated with hazards in the workplace review of research into OHS hazards and their associated risks assessment of documentation completed when identifying hazards and assessing risks evaluation of preparations undertaken to plan how OHS issues will be resolved. |
Guidance information for assessment | Holistic assessment with other units relevant to the industry sector, workplace and job role is recommended, for example: other OHS units. |
Range Statement
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included. | |
Hazard identification tools, techniques, processes and methods may include: | analysis of injury and claims statistics audits body mapping checklists for hazard identification consultation with workers, clients or other users identification of employee concerns, such as through a hazard reporting system input of managers, OHS representatives, OHS committee and others through consultative processes interviews investigations job safety analyses material safety data sheets (MSDSs) monitoring and measurement observation review of past incidents, incident and hazard reports, hazardous substances and dangerous goods registers, plant and maintenance records review of research and industry literature review of technical standards and other information sources simulations timelines of actions and events use of incident models workplace processes such as 'walk through', surveys and inspections |
Hazards may include: | sources of potential harm in terms of human injury, ill health, damage to property, damage to the environment, or a combination of these, including: biological chemical environment mechanical and/or electrical nuclear physical psychosocial radiological |
Persons conducting workplace inspections or testing may include: | employers internal or external consultants OHS specialists and testers such as: audiologists ergonomists health professionals occupational health professionals occupational hygienists safety engineers safety professionals toxicologists OHS technical advisors such as: engineers (design, acoustic, safety, mechanical and civil) maintenance and tradespeople safety representatives workplace assessors with experience in language or disability issues |
Sources of information may include: | audits employer groups hazard, incident and investigation reports industry bodies legislation, standards, manufacturers' manuals and specifications available at the workplace minutes of meetings from incident investigations MSDSs and registers OHS professional bodies OHS specialists other manufacturers' manuals and specifications regulatory authorities (for codes of practice, legislation) reports standards, from Australia or overseas unions websites, journals and newsletters workplace inspections |
Risk assessment tools may include: | aids that may be included in: legislation codes of practice standards guidelines or other relevant documentation checklists |
Risk register may include: | a list of hazards, their location and the people exposed to them a range of possible scenarios or circumstances under which these hazards may cause injury or damage nature of injury or damage that could be caused results of a risk assessment possible control measures for implementation |
Sectors
Unit sector |
Competency Field
Regulation, Licensing and Risk - Occupational Health and Safety |
Employability Skills
This unit contains employability skills. |
Licensing Information
Not applicable.