Application
This unit of competency supports the achievement of skills and knowledge to use static machines, which may include working with others and as a member of a team. |
Prerequisites
Apply OHS requirements, policies and procedures in the construction industry | ||
Elements and Performance Criteria
ELEMENT | PERFORMANCE CRITERIA |
1. Plan and prepare. | 1.1. Work instructions and operational details are obtained using relevant information, confirmed and applied for planning and preparation purposes. 1.2. Safety (OHS) requirements are followed in accordance with safety plans and policies. 1.3. Signage and barricade requirements are identified and implemented. 1.4. Tools and equipment selected to carry out tasks are consistent with job requirements, checked for serviceability and any faults are rectified or reported prior to commencement. 1.5. Material quantity requirements are calculated in accordance with plans, specifications and quality requirements. 1.6. Materials appropriate to the work application are identified, obtained, prepared, safely handled and located ready for use. 1.7. Environmental requirements are identified for the project in accordance with environmental plans and statutory and regulatory authority requirements, and are applied. |
2. Identify static machines, their operation and safety requirements. | 2.1. Types and functions of static machines are identified for use in off-site production. 2.2. Method of operation of machines is identified in accordance with manufacturer's operating manual. 2.3. OHS requirements for guard attachment and cut-off switches are identified. 2.4. OHS requirements for personal protective equipment (PPE) associated with using machines are identified and used. 2.5. Quality assurance requirements of organisation's machining operations are recognised and adhered to. |
3. Prepare machine for use. | 3.1. Particular safety requirements for preparing and using static machines are recognised and adhered to. 3.2. Appropriate PPE is selected, correctly fitted and used. 3.3. Machine is set up to required operating process and setting with fences/guides locked to position in accordance with standard operating procedures. |
4. Operate machine. | 4.1. Machine start-up procedure is carried out to manufacturer recommendations. 4.2. Material is fed to machine, where applicable, in accordance with manufacturer recommendations, safe handling procedures and standard operating procedures. 4.3. Material is set up and held in place, where applicable, for mobile machine and moving table operations in accordance with manufacturer recommendations. 4.4. Machine is operated in accordance with its designed capacity and purpose and to manufacturer specifications and OHS requirements. 4.5. Machine shut-down procedure is carried out to manufacturer recommendations and under supervisor's instructions. |
5. Maintain machine and attachments. | 5.1. Machines are maintained through regular servicing to manufacturer's operating manual. 5.2. Major faults are identified and reported to responsible supervisor. 5.3. Minor faults are identified and corrected where applicable, under supervision. 5.4. Assistance is given when cutters/blades and attachments are fitted and secured to manufacturer specifications, under supervisor's instruction. |
6. Clean up. | 6.1. Machine is cleaned and waste material disposed of safely under supervisor's instruction. 6.2. Cutters, blades and attachments are cleaned, checked and stored under supervisor's instruction. |
Required Skills
Required skills |
Required skills for this unit are: ability to recognise procedures, respond to change and contribute to workplace responsibilities, such as current work site environmental or sustainability frameworks or management systems communication skills to: enable clear and direct communication, using questioning to identify and confirm requirements, share information, listen and understand follow instructions read and interpret: Australian standards operating manual specifications other relevant documentation use and interpret non-verbal communication use language and concepts appropriate to cultural differences innovation skills to select appropriate tools and equipment, respond to workplace challenges and put ideas into action numeracy skills to workplace requirements problem solving skills to recognise and take action to rectify minor faults and problems teamwork skills to be able to work with others to action tasks and relate to people from a range of cultural, social, ethnic backgrounds and with varying physical and mental abilities. |
Required knowledge |
Required knowledge for this unit is: basic maintenance of static machines job safety analysis (JSA) and safe work method statements materials handling related to working with static machines types of static machines and their operation workplace and equipment safety requirements. |
Evidence Required
The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package. | |
Overview of assessment | This unit of competency could be assessed in the workplace or a close simulation of the workplace environment, provided that simulated or project-based assessment techniques fully replicate construction workplace conditions, materials, activities, responsibilities and procedures. |
Critical aspects for assessment and evidence required to demonstrate competency in this unit | A person who demonstrates competency in this unit must be able to provide evidence of the ability to set up three separate types of machines for processing at least one of the materials listed in the range statement, providing evidence of the ability to: comply with OHS regulations applicable to workplace and machine operations comply with organisational policies and procedures, including quality assurance requirements within context of carrying out machining operations identify and appropriately apply manufacturer recommendations in use of machine identify and correctly apply guarding requirements in operating machine demonstrate correct setting up procedures for machine operations prior to use demonstrate correct start-up procedures for operation of machines demonstrate safe and effective operation of machine demonstrate correct shut-down and switch-off procedures on completion of machining operation clean and maintain machine correctly place or remove cutters and blades safely and correctly. |
Context of and specific resources for assessment | This competency is to be assessed using standard and authorised work practices, safety requirements and environmental constraints. Assessment of essential underpinning knowledge will usually be conducted in an off-site context. Assessment is to comply with relevant regulatory or Australian standards' requirements. Resource implications for assessment include: workshop location access to a range of static machines materials appropriate to work orientation of machining operations information and specifications of material machining requirements. Reasonable adjustments for people with disabilities must be made to assessment processes where required. This could include access to modified equipment and other physical resources, and the provision of appropriate assessment support. |
Method of assessment | Assessment methods must: satisfy the endorsed Assessment Guidelines of the Construction, Plumbing and Services Training Package include direct observation of tasks in real or simulated work conditions, with questioning to confirm the ability to consistently identify and correctly interpret the essential underpinning knowledge required for practical application reinforce the integration of employability skills with workplace tasks and job roles confirm a reasonable inference that competency is not only verified under the particular assessment circumstance, but is able to be transferred to other circumstances and environments. Validity and sufficiency of evidence requires that: competency will need to be demonstrated over a period of time reflecting the scope of the role and practical requirements of the workplace where the assessment is part of a structured learning experience the evidence collected must relate to a number of performances assessed at different points in time and separated by further learning and practice with a decision on competency only taken at the point when the assessor has complete confidence in the person's demonstrated ability and applied knowledge all assessment that is part of a structured learning experience must include a combination of direct, indirect and supplementary evidence. Assessment processes and techniques should, as far as is practical, take into account the language, literacy and numeracy capacity of the candidate in relation to the competency being assessed. Supplementary evidence of competency may be obtained from relevant authenticated documentation from third parties, such as existing supervisors, team leaders or specialist training staff. |
Range Statement
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included. | |
Information includes: | diagrams or sketches instructions issued by authorised organisational or external personnel manufacturer specifications and instructions, where specified material safety data sheets (MSDS) memos regulatory and legislative requirements pertaining to using static machines relevant Australian standards safe work procedures relating to using static machines signage verbal, written and graphical instructions work bulletins work schedules, plans and specifications. |
Planning and preparation include: | assessment of conditions and hazards determination of work requirements and safety plans and policies equipment defect identification work site inspection. |
Safety (OHS) is to be in accordance with state and territory legislation and regulations and project safety plan and may include: | emergency procedures, including extinguishing fires, organisational first aid requirements and evacuation hazard control hazardous materials and substances organisational first aid PPE prescribed under legislation, regulations and workplace policies and practices safe operating procedures, including the conduct of operational risk assessment and treatments associated with: concealed services (water, power and gas) lighting restricted access barriers traffic control work site visitors and the public working at heights working in confined spaces working in proximity to others use of firefighting equipment use of tools and equipment workplace environmental requirements and safety. |
Tools and equipment include: | brushes feeler gauges grease guns hammers measuring tapes and rules oil cans packers screwdrivers spanners spirit levels squares wedges. |
Quality requirements include: | attention to specifications of work control of handling procedures quality of materials used in machining operations relevant regulations, including: Australian standards internal company quality policy and standards manufacturer specifications where specified workplace operations and procedures use and maintenance of machines workplace operations and procedures. |
Materials include: | acrylic or similar materials glass or similar materials metal or similar materials natural soft or hard stone timber or similar materials. |
Environmental requirements include: | clean-up management dust and noise stormwater protection waste management. |
Statutory and regulatory authority includes: | federal, state and local authorities administering applicable Acts, regulations and codes of practice. |
Static machines include: | band saws buzzers (jointer/surface planer) dimensional saws docking saws grinders mortisers multi-drill machine rip saws table sanders thicknessers travelling beam saws vertical and horizontal drills. |
Sectors
Unit sector | Construction |
Co-Requisites
Nil | ||
Employability Skills
This unit contains employability skills. |
Licensing Information
Not Applicable