Application
This unit of competency supports the attainment of the understanding and skills to apply stains and clear timber finishes, which may include working with others and as a member of a team. |
Prerequisites
Apply OHS requirements, policies and procedures in the construction industry | ||
Elements and Performance Criteria
ELEMENT | PERFORMANCE CRITERIA |
1. Plan and prepare. | 1.1. Work instructions and operational details are obtained using relevant information, confirmed and applied for planning and preparation purposes. 1.2. Safety (OHS) requirements are followed in accordance with safety plans and policies. 1.3. Signage and barricade requirements are identified and implemented. 1.4. Tools and equipment selected to carry out tasks, including work platforms where required are consistent with the requirements of the job, checked for serviceability and any faults are rectified or reported prior to commencement. 1.5. Materials quantity requirements are calculated in accordance with plans, specifications and quality requirements. 1.6. Materials appropriate to the work application are identified, obtained, prepared, safely handled and located ready for use. 1.7. Environmental requirements are identified for the project in accordance with environmental plans and regulatory obligations and applied. 1.8. Stain colour to be applied is matched to previously treated timber or associated area or item. |
2. Prepare materials and application area. | 2.1. Area is set up for application processes to suit application system being used. 2.2. Adjoining surfaces to application area are protected by masking off or covering, prior to application of stains and finishes. 2.3. Adequate ventilation to application area is provided to maintain a safe environment. 2.4. Measures are taken to ensure application area remains free of dust and foreign matter. 2.5. Existing stained or finished surfaces for application are stripped using appropriate techniques. |
3. Stain bare timber surface. | 3.1. Stain is selected for type of timber allowing for aesthetics and durability in accordance with manufacturer recommendations and job specifications. 3.2. Stain is prepared to proportions and consistency in accordance with manufacturer recommendations and job specification. 3.3. 3.4. Stain is applied to bare timber surface to specifications and manufacturers' instructions. 3.5. Wood filler and putty are selected, mixed, colour matched and applied to timber in accordance with job specifications. |
4. Apply clear finishes. | 4.1. Coats of selected clear finish are applied to achieve required level of opacity, finish and sheen in accordance with manufacturer recommendations and job specifications. 4.2. Drying time is allowed between coats in accordance with manufacturer recommendations and job specifications. 4.3. Clear finish surfaces are cured in accordance with manufacturer recommendations and job specifications. |
5. Clean up. | 5.1. Unused materials are sealed and stored/stacked in accordance with standard material handling practices and techniques and company requirements. 5.2. Painting tools and equipment are cleaned with correct solutions and without damage, and stored safely and effectively to manufacturer specifications. 5.3. Paint waste, water and solvents used in cleaning painting equipment are disposed of in an environmentally sustainable manner and in accordance with relevant legislative requirements. 5.4. Work area is cleared and materials disposed of, reused or recycled in accordance with legislation, regulations, codes of practice and job specification. |
Required Skills
Required skills |
Required skills for this unit are: communication skills to: determine requirements enable clear and direct communication, using questioning to identify and confirm requirements, share information, listen and understand follow instructions read and interpret: documentation from a variety of sources drawings and specifications report faults use language and concepts appropriate to cultural differences use and interpret non-verbal communication, such as hand signals evaluating own actions and making judgments about performance and necessary improvements identifying and accurately reporting to appropriate personnel any faults in tools, equipment or materials organisational skills, including the ability to plan and set out work recognising procedures, following instructions, responding to change and contributing to workplace responsibilities, such as current work site environmental and sustainability frameworks or management systems teamwork skills to coordinate own work with others to action tasks and relate to people from a range of cultural and ethnic backgrounds and with varying physical and mental abilities technological skills to: use a range of mobile technology, such as two-way radio and mobile phones voice and hand signals to access and understand site-specific instructions. |
Required knowledge |
Required knowledge for this unit is: Australian Paint Approval Scheme (APAS) classifications basic softwood and hardwood timber technology conservation conservation areas hazards associated with solvents, chemicals and dust heritage listed buildings job safety analysis (JSA) and safe work method statements maintenance, renovation and refurbishment material safety data sheets (MSDS) materials storage and environmentally sustainable waste management, including correct disposal of water-based, latex-based and solvent-based paints and finishes new building (residential, commercial and high rise) painting and decorating terminology plans, drawings and specifications processes for the calculation of material requirements quality requirements responsibilities with regard to: restoration solid waste and paint sludge disposal techniques and relevant legislation, including Environmental Protection Authority (EPA) and local Council regulations surface preparation techniques for clear wood finishing testing techniques and support materials theoretical principles relating to pigmentation and colouring agents, drying and curing processes and the role of solvents types of paints, including the characteristics and uses of paint materials with various volatile organic compound (VOCs) levels and alternative and natural paints types, properties, uses and limitations of clear timber finishes and timber stains types, uses and limitations of commonly used brushes, rollers and other applicators variances in work carried out within sectors of painting and decorating industry for: workplace and equipment safety requirements. |
Evidence Required
The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package. | |
Overview of assessment | This unit of competency could be assessed in the workplace or a close simulation of the workplace environment, provided that simulated or project-based assessment techniques fully replicate construction workplace conditions, materials, activities, responsibilities and procedures. |
Critical aspects for assessment and evidence required to demonstrate competency in this unit | A person who demonstrates competency in this unit must be able to provide evidence of the ability to: locate, interpret and apply relevant information, standards and specifications comply with site safety plan and OHS legislation, regulations and codes of practice applicable to workplace operations comply with organisational policies and procedures including quality requirements safely and effectively operate and use tools, plant and equipment communicate and work effectively and safely with others apply stains and clear timber finishes (with finishes being to specification, including in terms of defects, colour, level of opacity, finish and sheen) which is at a minimum to cover: one oil-based stain product one water and spirit-based timber stain one water-based clear finish one oil-based clear finish grain filler applications putty applications. apply at least one stain and one clear finish to two previously treated timber surfaces with each stain and clear finish application to be not less than 2 square metres or two lineal metres in each case dispose of all paint and finishes in an environmentally sustainable way compliant with relevant local legislation and regulations clean and store painting equipment using environmentally sustainable methods and work practices including waste reticulation systems. |
Context of and specific resources for assessment | This competency is to be assessed using standard and authorised work practices, safety requirements and environmental constraints. Assessment of essential underpinning knowledge will usually be conducted in an off-site context. Assessment is to comply with relevant regulatory or Australian standards' requirements. Resource implications for assessment include: an induction procedure and requirement realistic tasks or simulated tasks covering the mandatory task requirements relevant specifications and work instructions tools and equipment appropriate to applying safe work practices support materials appropriate to activity workplace instructions relating to safe work practices and addressing hazards and emergencies material safety data sheets research resources, including industry related systems information. Reasonable adjustments for people with disabilities must be made to assessment processes where required. This could include access to modified equipment and other physical resources, and the provision of appropriate assessment support. |
Method of assessment | Assessment methods must: satisfy the endorsed Assessment Guidelines of the Construction, Plumbing and Services Training Package include direct observation of tasks in real or simulated work conditions, with questioning to confirm the ability to consistently identify and correctly interpret the essential underpinning knowledge required for practical application reinforce the integration of employability skills with workplace tasks and job roles confirm that competency is verified and able to be transferred to other circumstances and environments. Validity and sufficiency of evidence requires that: competency will need to be demonstrated over a period of time reflecting the scope of the role and the practical requirements of the workplace where the assessment is part of a structured learning experience the evidence collected must relate to a number of performances assessed at different points in time and separated by further learning and practice, with a decision on competency only taken at the point when the assessor has complete confidence in the person's demonstrated ability and applied knowledge all assessment that is part of a structured learning experience must include a combination of direct, indirect and supplementary evidence. Assessment processes and techniques should as far as is practical take into account the language, literacy and numeracy capacity of the candidate in relation to the competency being assessed. Supplementary evidence of competency may be obtained from relevant authenticated documentation from third parties, such as existing supervisors, team leaders or specialist training staff. |
Range Statement
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included. | |
Information includes: | diagrams or sketches instructions issued by authorised organisational or external personnel manufacturer specifications and instructions, where specified MSDS memos regulatory and legislative requirements pertaining to the application of stains and clear timber finishes relevant Australian standards safe work procedures relating to the application of stains and clear timber finishes signage verbal, written and graphical instructions work bulletins work schedules, plans and specifications. |
Planning and preparation include: | assessment of conditions and hazards determination of work requirements and safety plans and policies equipment defect identification work site inspection. |
Safety (OHS) is to be in accordance with state and territory legislation and regulations and project safety plan and may include: | emergency procedures, including extinguishing fires, organisational first aid requirements and evacuation handling activities that may require the assistance of others or the use of manual or mechanical lifting devices where size, weight or other issues, such as a disability are a factor hazard control hazardous materials and substances organisational first aid PPE prescribed under legislation, regulations and workplace policies and practices safe operating procedures, including the conduct of operational risk assessment and treatments associated with: earth leakage boxes electrical and fire and/or explosion from combustible materials falling objects lighting manual handling power cables, including overhead service trays, cables and conduits restricted access barriers solvents, lead, chemicals, fumes/gases surrounding structures traffic control trip hazards work access platforms work site visitors and the public working at heights working in confined spaces working in proximity to others, work site visitors and the public use of firefighting equipment use of tools and equipment workplace environmental requirements and safety. |
Tools and equipment include: | brushware brushware accessories buckets drop sheets duster brushes filling knives and blades hammers hand sanders heat guns mechanical sanders nail punches paint pots and buckets paint stirrers putty knives roller accessories roller frames scrapers spray equipment. |
Work platforms include: | stepladders trestles planks. |
Quality requirements include: | internal company quality policy and standards manufacturer specifications, where specified relevant regulations, including Australian standards workplace operations and procedures. |
Materials: | include: grain fillers (water, spirit or oil) putty single pack clear finish timber stains (water, spirit, oil or slightly pigmented varnish/polyurethane) may include: acrylic clear and two pack epoxy clear, shellac, tinting agents and waxes clear finishes for timber, including lacquers and two pack polyurethane. |
Environmental requirements include: | clean-up management dust and noise low odour and emissions stormwater protection waste management. |
include: brush paint pad (sponge) rag roller may include spray. | |
is to be in accordance with the relevant Australian standard unless this is replaced by other authorised job specifications. | |
Surfaces to be finished/pre-finished: | include: curved horizontal inclined vertical may be all common profiles encompassing: building boards, including particle board doors floors in sound or unsound conditions medium density fibreboard (MDF) natural timber products panelling ply previously coated/treated timber surface stairs. |
Finish includes: | flat full gloss satin semi-gloss. |
Paint waste, water and solvents disposal includes: | use of manual and machine environmentally sustainable cleaning methods cleaning water re-cycling or professional disposal solid waste disposal requirements |
Sectors
Unit sector | Construction |
Employability Skills
This unit contains employability skills. |
Licensing Information
Not Applicable