Application
This unit of competency supports the achievement of skills and knowledge to prepare for stonemasonry operations and installations, which may include working with others and as a member of a team. |
Prerequisites
Apply OHS requirements, policies and procedures in the construction industry | ||
Elements and Performance Criteria
ELEMENT | PERFORMANCE CRITERIA |
1. Plan and prepare. | 1.1. Work instructions and operational details are obtained using relevant information, confirmed and applied for planning and preparation purposes. 1.2. Safety (OHS) requirements are followed in accordance with safety plans and policies. 1.3. Signage and barricade requirements are identified and implemented. 1.4. Tools and equipment selected to carry out tasks are consistent with job requirements, checked for serviceability and any faults are rectified or reported prior to commencement. 1.5. Material quantity requirements are calculated in accordance with plans, specifications and quality requirements. 1.6. Materials, including correct type of stone and materials other than stone appropriate to the work application are identified, obtained, prepared, safely handled and located ready for use. 1.7. Environmental requirements are identified for the project in accordance with environmental plans and statutory and regulatory authority requirements, and are applied. |
2. Prepare work area suitable for construction process. | 2.1. Activities to be carried out in work area are identified from type of stonemasonry work and planned procedures according to layout of construction and access to location. 2.2. Work area is prepared for construction process according to supervisor's instructions. |
3. Use tools, plant and equipment appropriate for construction process. | 3.1. Regular hand and power tools suitable for application process are identified from job requirements. 3.2. Hand and power tools are used safely and effectively to carry out processes. |
4. Assist with stonemasonry work. | 4.1. Selected stone is visually checked to ensure it meets specifications, including colour and matching surrounding area, and is distributed to location. 4.2. Surface is brushed, scraped and washed cleaned of surplus mortar material on completion of stonemasonry process. |
5. Clean up. | 5.1. Materials are stacked and/or stored for re-use or removal. 5.2. Work area is cleared. 5.3. Tools and equipment are cleaned, maintained and stored. 5.4. Waste is disposed of appropriately. |
Required Skills
Required skills |
Required skills for this unit are: ability to recognise procedures, respond to change and contribute to workplace responsibilities, such as current work site environmental or sustainability frameworks or management systems communication skills to: enable clear and direct communication, using questioning to identify and confirm requirements, share information, listen and understand follow instructions read and interpret: drawings and specifications material safety data sheets plans use and interpret non-verbal communication use language and concepts appropriate to cultural differences innovation skills to select appropriate tools and equipment, respond to workplace challenges and put ideas into action numeracy skills to calculate measurement requirements related to lengths and allowances problem solving skills to recognise and take action to rectify minor faults and problems teamwork skills to be able to work with others to action tasks and relate to people from a range of cultural, social, ethnic backgrounds and with varying physical and mental abilities. |
Required knowledge |
Required knowledge for this unit is: interpretation of drawings and specifications job safety analysis (JSA) and safe work method statements material handling techniques associated with stonemasonry work measurement techniques relevant to stone types and characteristics of materials used in stonemasonry work types and safe use of portable power tools for stonemasonry work types and use of hand tools and equipment relevant to stonemasonry work workplace and equipment safety requirements. |
Evidence Required
The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package. | |
Overview of assessment | This unit of competency could be assessed in the workplace or a close simulation of the workplace environment, provided that simulated or project-based assessment techniques fully replicate construction workplace conditions, materials, activities, responsibilities and procedures. |
Critical aspects for assessment and evidence required to demonstrate competency in this unit | A person who demonstrates competency in this unit must be able to prepare for a range of stonemasonry activities, providing evidence of the ability to: comply with OHS regulations applicable to workplace operations comply with organisational policies and procedures, including quality assurance requirements carry out correct procedures prior to and during the construction processes demonstrate safe and effective operational use of tools, plant and equipment adopt and use correct procedures to handle and place materials communicate with others to ensure safe and effective work site operations. |
Context of and specific resources for assessment | This competency is to be assessed using standard and authorised work practices, safety requirements and environmental constraints. Assessment of essential underpinning knowledge will usually be conducted in an off-site context. Assessment is to comply with relevant regulatory or Australian standards' requirements. Resource implications for assessment include: construction materials relevant to stonemasonry work hand and power tools appropriate to stonemasonry work processes plant and equipment appropriate to stonemasonry work processes suitable work area appropriate to construction processes. Reasonable adjustments for people with disabilities must be made to assessment processes where required. This could include access to modified equipment and other physical resources, and the provision of appropriate assessment support. |
Method of assessment | Assessment methods must: satisfy the endorsed Assessment Guidelines of the Construction, Plumbing and Services Training Package include direct observation of tasks in real or simulated work conditions, with questioning to confirm the ability to consistently identify and correctly interpret the essential underpinning knowledge required for practical application reinforce the integration of employability skills with workplace tasks and job roles confirm a reasonable inference that competency is not only verified under the particular assessment circumstance, but is able to be transferred to other circumstances and environments. Validity and sufficiency of evidence requires that: competency will need to be demonstrated over a period of time reflecting the scope of the role and practical requirements of the workplace where the assessment is part of a structured learning experience the evidence collected must relate to a number of performances assessed at different points in time and separated by further learning and practice with a decision on competency only taken at the point when the assessor has complete confidence in the person's demonstrated ability and applied knowledge all assessment that is part of a structured learning experience must include a combination of direct, indirect and supplementary evidence. Assessment processes and techniques should, as far as is practical, take into account the language, literacy and numeracy capacity of the candidate in relation to the competency being assessed. Supplementary evidence of competency may be obtained from relevant authenticated documentation from third parties, such as existing supervisors, team leaders or specialist training staff. |
Range Statement
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included. | |
1.1. Information includes: | diagrams or sketches instructions issued by authorised organisational or external personnel manufacturer specifications and instructions, where specified material safety data sheets (MSDS) memos regulatory and legislative requirements pertaining to preparation for stonemasonry production process relevant Australian standards safe work procedures relating to preparation for stonemasonry production process signage verbal, written and graphical instructions work bulletins work schedules, plans and specifications. |
1.2. Planning and preparation include: | assessment of conditions and hazards determination of work requirements and safety plans and policies equipment defect identification work site inspection. |
1.3. Safety (OHS) is to be in accordance with state and territory legislation and regulations and project safety plan and may include: | emergency procedures, including extinguishing fires, organisational first aid requirements and evacuation hazard control hazardous materials and substances organisational first aid PPE prescribed under legislation, regulations and workplace policies and practices safe operating procedures, including the conduct of operational risk assessment and treatments associated with: concealed services (water, power and gas) dust lighting restricted access barriers traffic control wind work site visitors and the public working at heights working from platforms working in confined spaces working in proximity to others working with heavy stone use of firefighting equipment use of shifting equipment use of tools and equipment working platforms and scaffolding workplace environmental requirements and safety. |
1.4. Tools and equipment include: | angle grinders bolsters brushes and brooms hammers hoses masonry saws measuring tapes and rules mortar boards power leads scaffolding shovels wheelbarrows. |
1.5. Quality requirements include: | handling of materials preparation of surfaces relevant regulations, including: Australian standards internal company quality policy and standards manufacturer specifications where specified workplace operations and procedures storage of materials use and maintenance of tools and equipment. |
1.6. Materials: | include: cement lime sand may vary in accordance with stone: colour shape size type preparation may include: cutting stone preparing materials for batching for mortar. |
1.7. Environmental requirements include: | clean-up management dust and noise stormwater protection waste management. |
1.8. Statutory and regulatory authority includes: | federal, state and local authorities administering applicable Acts, regulations and codes of practice. |
1.9. Work area preparation includes: | cleaning of strip footings or slab erecting scaffolding establishing temporary water and power supply locating mortar boards preparing access for supply of mortar setting up concrete mixer. |
1.10. Construction processes include: | cleaning stone face laying stone preparing for stone laying work site preparation. |
Sectors
Unit sector | Construction |
Co-Requisites
Nil | ||
Employability Skills
This unit contains employability skills. |
Licensing Information
Not Applicable