Application
This unit of competency supports the achievement of skills and knowledge to split stone manually, which may include working with others and as a member of a team. |
Prerequisites
Apply OHS requirements, policies and procedures in the construction industry | ||
Elements and Performance Criteria
ELEMENT | PERFORMANCE CRITERIA |
1. Plan and prepare. | 1.1. Work instructions and operational details are obtained using relevant information, confirmed and applied for planning and preparation purposes. 1.2. Safety (OHS) requirements are followed in accordance with safety plans and policies. 1.3. Signage and barricade requirements are identified and implemented. 1.4. Tools and equipment selected to carry out tasks are consistent with job requirements, checked for serviceability and any faults are rectified or reported prior to commencement. 1.5. Material quantity requirements are calculated in accordance with plans, specifications and quality requirements. 1.6. Materials appropriate to the work application are identified, obtained, prepared, safely handled and located ready for use. 1.7. Environmental requirements are identified for the project in accordance with environmental plans and statutory and regulatory authority requirements, and are applied. |
2. Use a range of methods for splitting stone. | 2.1. Alternative methods are identified for drilling and splitting stone. 2.2. Stone is split and squared by drilling and using plugs and feathers. 2.3. Holes are set out to line and spacings and drilled to depths as specified for type and size of stone. 2.4. Guillotine principles are applied and used for splitting various thicknesses of slabbed stone as required by job or organisation. 2.5. Stone is split using natural lines of cleavage. |
3. Clean up work. | 3.1. Stone surfaces are finished as required by job and specifications. 3.2. Work is cleaned on completion with fresh water and brushes if necessary. 3.3. Waste materials are disposed of in an appropriate manner and in accordance with Environment Protection Authority (EPA) requirements. |
Required Skills
Required skills |
Required skills for this unit are: ability to recognise procedures, respond to change and contribute to workplace responsibilities, such as current work site environmental or sustainability frameworks or management systems communication skills to: enable clear and direct communication, using questioning to identify and confirm requirements, share information, listen and understand follow instructions read and interpret drawings and specifications use and interpret non-verbal communication use language and concepts appropriate to cultural differences innovation skills to select appropriate tools and equipment, respond to workplace challenges and put ideas into action numeracy skills to apply measurements and calculations problem solving skills to recognise and take action to rectify minor faults and problems teamwork skills to be able to work with others to action tasks and relate to people from a range of cultural, social, ethnic backgrounds and with varying physical and mental abilities. |
Required knowledge |
Required knowledge for this unit is: interpretation of working drawings and specifications relevant to stonemasonry work job safety analysis (JSA) and safe work method statements material handling techniques associated with stonemasonry work measuring and marking techniques relevant to splitting stone methods of splitting stone regulations related to safe waste disposal and dust suppression types of stone and their characteristics workplace and equipment safety requirements. |
Evidence Required
The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package. | |
Overview of assessment | This unit of competency could be assessed in the workplace or a close simulation of the workplace environment, provided that simulated or project-based assessment techniques fully replicate construction workplace conditions, materials, activities, responsibilities and procedures. |
Critical aspects for assessment and evidence required to demonstrate competency in this unit | A person who demonstrates competency in this unit must be able to split stones to thickness both with and against the grain, providing evidence of the ability to: comply with OHS regulations applicable to workplace operations apply organisational quality procedures and processes within context of splitting stone select and use appropriate processes, tools and equipment to carry out tasks split both hard and soft stone sequence appropriate tasks associated with splitting stone adopt and use safe and effective procedures when using power tools and splitting of stone. |
Context of and specific resources for assessment | This competency is to be assessed using standard and authorised work practices, safety requirements and environmental constraints. Assessment of essential underpinning knowledge will usually be conducted in an off-site context. Assessment is to comply with relevant regulatory or Australian standards' requirements. Resource implications for assessment include: workplace location hand tools and equipment appropriate to splitting stone stone appropriate to activity drawings, specifications and documentation relevant to activity. Reasonable adjustments for people with disabilities must be made to assessment processes where required. This could include access to modified equipment and other physical resources, and the provision of appropriate assessment support. |
Method of assessment | Assessment methods must: satisfy the endorsed Assessment Guidelines of the Construction, Plumbing and Services Training Package include direct observation of tasks in real or simulated work conditions, with questioning to confirm the ability to consistently identify and correctly interpret the essential underpinning knowledge required for practical application reinforce the integration of employability skills with workplace tasks and job roles confirm a reasonable inference that competency is not only verified under the particular assessment circumstance, but is able to be transferred to other circumstances and environments. Validity and sufficiency of evidence requires that: competency will need to be demonstrated over a period of time reflecting the scope of the role and practical requirements of the workplace where the assessment is part of a structured learning experience the evidence collected must relate to a number of performances assessed at different points in time and separated by further learning and practice with a decision on competency only taken at the point when the assessor has complete confidence in the person's demonstrated ability and applied knowledge all assessment that is part of a structured learning experience must include a combination of direct, indirect and supplementary evidence. Assessment processes and techniques should, as far as is practical, take into account the language, literacy and numeracy capacity of the candidate in relation to the competency being assessed. Supplementary evidence of competency may be obtained from relevant authenticated documentation from third parties, such as existing supervisors, team leaders or specialist training staff. |
Range Statement
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included. | |
Information includes: | diagrams or sketches instructions issued by authorised organisational or external personnel manufacturer specifications and instructions, where specified material safety data sheets (MSDS) memos regulatory and legislative requirements pertaining to handling stone relevant Australian standards safe work procedures relating to handling stone signage verbal, written and graphical instructions work bulletins work schedules, plans and specifications. |
Planning and preparation include: | assessment of conditions and hazards determination of work requirements and safety plans and policies equipment defect identification work site inspection. |
Safety (OHS) is to be in accordance with state and territory legislation and regulations and project safety plan and may include: | emergency procedures, including extinguishing fires, organisational first aid requirements and evacuation hazard control hazardous materials and substances organisational first aid PPE prescribed under legislation, regulations and workplace policies and practices safe operating procedures, including the conduct of operational risk assessment and treatments associated with: concealed services (water, power and gas) lighting restricted access barriers traffic control work site visitors and the public working at heights working in confined spaces working in proximity to others use of firefighting equipment use of tools and equipment workplace environmental requirements and safety. |
Tools and equipment include: | axes bush hammers chisels masonry drills patent axes plugs and feathers poky sledge hammers spalling hammers splitting wedges. |
Quality requirements include: | attention to specifications of work procedures in splitting stone relevant regulations, including: Australian standards internal company quality policy and standards manufacturer specifications where specified workplace operations and procedures use and maintenance of equipment. |
Materials include hard and soft stones, such as: | basalt (blue stone) granite limestone locally available stone porphyry sandstone slate. |
Environmental requirements include: | clean-up management dust and noise vibration waste management. |
Statutory and regulatory authority include: | federal, state and local authorities administering applicable Acts, regulations and codes of practice. |
Splitting stone methods may include: | expanding grout freezing hydra splitting plugs and feathers v-cut and wedging. |
Sectors
Unit sector | Construction |
Employability Skills
This unit contains employability skills. |
Licensing Information
Not Applicable