CPCCVE1001A
Undertake a basic construction project


Elements and Performance Criteria

ELEMENT

PERFORMANCE CRITERIA

Elements describe the essential outcomes of a unit of competency.

Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold italicised text is used, further information is detailed in the required skills and knowledge section and the range statement. Assessment of performance is to be consistent with the evidence guide.

Plan and prepare.

Work instructions and operational details for the projectplanning are obtained, confirmed and applied from relevant information .

Safety (OHS) requirements are followed in accordance with safety plans and policies.

Signage and barricade requirements are identified and implemented.

Tools and equipment selected to carry out tasks are consistent with job requirements, checked for serviceability, and any faults are rectified or reported prior to commencement.

Material quantity requirements are calculated in accordance with plans and specifications.

Materials appropriate to the work application are identified, obtained, prepared, safely handled and located ready for use.

Environmental requirements are identified for the project in accordance with environmental plans and statutory and regulatory authority obligations, and are applied.

Prepare materials for use on a simple construction project.

Required materials are selected for the project from project plans and specifications.

Materials are checked for quality in accordance with the specifications.

Determine component requirements and assembly sequence

Component parts are identified from working drawings and specifications

Processes for manufacture, assembly or other construction techniques and components are selected and applied in accordance with working drawings, specifications and established work procedures.

Construction process is determined.

Component parts are checked for accuracy, quality and suitability for the project according to plans, drawings, specifications and established work procedures.

Operate hand tools.

Hand tools are identified and checked for serviceability and operation in accordance with OHS legislation.

Equipment to hold or support material during the operation of tools is selected and applied in accordance with standard work practices.

Hand tools are used in accordance with OHS legislation.

Use equipment safely

Equipment is selected and checked for serviceability and operation in accordance with OHS legislation.

Equipment is safely and effectively operated in accordance with OHS legislation, and used to construct basic project

Construct a simple project.

Work area requirements are prepared in accordance with working drawings, specifications and established work procedures.

Set out, levelling, construction and erection or installation of project are implemented in accordance with application and requirements for line, level and plumb in construction projects.

Construction project is completed to specification and quality and is checked for conformity to plans and design specifications.

Clean up.

Work area is cleared and materials disposed of, reused or recycled in accordance with legislation, regulations, codes of practice and job specification.

Tools and equipment are cleaned, checked, maintained and stored in accordance with manufacturer recommendations and standard work practices.

Required Skills

Required skills

Required skills for this unit are:

communication skills to:

identifying and accurately reporting to appropriate personnel any faults in tools, equipment or materials

numeracy skills to apply measurements and calculations

organisational skills, including the ability to plan and set out work

teamwork skills to work with others to action tasks and relate to people from a range of cultural and ethnic backgrounds and with varying physical and mental abilities

technological skills to:

determine requirements

enable clear and direct communication, using questioning to identify and confirmrequirements, share information, listen and understand

follow instructions

read and interpret:

report faults

use language and concepts appropriate to cultural differences

use and interpret non-verbal communication, such as hand signals

documentation from a variety of sources

drawings and specifications

use a range of mobile technology, such as two-way radio and mobile phones

voice and hand signals to access and understand site-specific instructions.

Required knowledge

Required knowledge for this unit is:

basic construction techniques

construction materials

construction terminology

hazardous materials

job safety analysis (JSA) and safe work method statements

material safety data sheets (MSDS)

material sizes

materials storage and environmentally friendly waste management

plans, specifications and drawings

plumb, line and level

processes for the calculation of material requirements

quality requirements

tools and equipment types, characteristics, uses, limitations and maintenance

workplace and equipment safety requirements.

Evidence Required

The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package

Overview of assessment

This unit of competency could be assessed in the workplace or a close simulation of the workplace environment, provided that simulated or project-based assessment techniques fully replicate construction workplace conditions, materials, activities, responsibilities and procedures.

Critical aspects for assessment and evidence required to demonstrate competency in this unit

A person who demonstrates competency in this unit must be able to provide evidence of the ability to:

locate, interpret and apply relevant information, standards and specifications

comply with site safety plan and OHS legislation, regulations and codes of practice applicable to workplace operations

comply with organisational policies and procedures, including quality requirements

safely and effectively use tools and equipment

communicate and work effectively and safely with others

complete a basic construction project to specifications, complying with OHS requirements, correct and safe use of hand tools and equipment.

Context of and specific resources for assessment

This competency is to be assessed using standard and authorised work practices, safety requirements and environmental constraints.

Assessment of essential underpinning knowledge will usually be conducted in an off-site context.

Assessment is to comply with relevant regulatory or Australian standards' requirements.

Resource implications for assessment include:

an induction procedure and requirement

realistic tasks or simulated tasks covering the mandatory task requirements

relevant specifications and work instructions

tools and equipment appropriate to applying safe work practices

support materials appropriate to activity

workplace instructions relating to safe work practices and addressing hazards and emergencies

material safety data sheets

research resources, including industry related systems information.

Reasonable adjustments for people with disabilities must be made to assessment processes where required. This could include access to modified equipment and other physical resources, and the provision of appropriate assessment support.

Method of assessment

Assessment methods must:

satisfy the endorsed Assessment Guidelines of theConstruction, Plumbing and Services Integrated Framework Training Package

include direct observation of tasks in real or simulated work conditions, with questioning to confirm the ability to consistently identify and correctly interpret the essential underpinning knowledge required for practical application

reinforce the integration of employability skills with workplace tasks and job roles

confirm that competency is verified and able to be transferred to other circumstances and environments.

Validity and sufficiency of evidence requires that:

competency will need to be demonstrated over a period of time reflecting the scope of the role and the practical requirements of the workplace

where the assessment is part of a structured learning experience the evidence collected must relate to a number of performances assessed at different points in time and separated by further learning and practice, with a decision on competency only taken at the point when the assessor has complete confidence in the person's demonstrated ability and applied knowledge

all assessment that is part of a structured learning experience must include a combination of direct, indirect and supplementary evidence.

Assessment processes and techniques should as far as is practical take into account the language, literacy and numeracy capacity of the candidate in relation to the competency being assessed.

Supplementary evidence of competency may be obtained from relevant authenticated documentation from third parties, such as existing supervisors, team leaders or specialist training staff.


Range Statement

The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.

Project planning includes:

assessment of conditions

determining work requirements

equipment defect identification

hazards

work site inspection.

Information includes:

diagrams or sketches

instructions issued by authorised organisational or external personnel

manufacturer specifications and instructions, where specified

MSDS

memos

regulatory and legislative requirements pertaining to undertaking a basic construction project

relevant Australian standards

safe work procedures relating to undertaking a basic construction project

signage

verbal, written and graphical instructions

work bulletins

work schedules, plans and specifications.

Safety (OHS) is to be in accordance with state and territory legislation and regulations and project safety plan and may include:

emergency procedures, including extinguishing fires, organisational first aid requirements and evacuation

handling activities that may require the assistance of others or the use of manual or mechanical lifting devices where size, weight or other issues, such as a disability are a factor

hazard control

hazardous materials and substances

organisational first aid

PPE prescribed under legislation, regulations and workplace policies and practices

safe operating procedures, including the conduct of operational risk assessment and treatments associated with:

use of firefighting equipment

use of tools and equipment

workplace environmental requirements and safety.

earth leakage boxes

lighting

power cables, including overhead service trays, cables and conduits

restricted access barriers

surrounding structures

traffic control

trip hazards

work site visitors and the public

working at heights

working in confined spaces

working in proximity to others

Tools and equipment include:

those appropriate to the project.

Materials include:

those appropriate to the project.

Environmental requirements include:

noise and dust

vibration and clean-up management

waste management.

Statutory and regulatory authorities include:

federal, state and local authorities administering applicable Acts, regulations and codes of practice.

Quality requirements include:

internal company quality policy and standards

manufacturer specifications, where specified

relevant regulations, including Australian standards

workplace operations and procedures.