Application
This unit of competency supports the application of communication, interpersonal and teamwork skills, and the use of technology. The skills and knowledge acquired upon completion of this unit would support the needs of new employees in the spatial information services industry sector in positions such as field hands and data collection assistants. While no licensing, legislative, regulatory or certification requirements apply holistically to this unit at the time of publication, relevant federal, and state or territory legislation, regulations and codes of practice impact upon this unit (see unit performance criteria and range statement). |
Prerequisites
Nil |
Elements and Performance Criteria
ELEMENT | PERFORMANCE CRITERIA | ||||
1Assist in preparations for the support task. | 1.1 Requirements of the job are clarified with relevant personnel according to organisational guidelines. 1.2 Tools, equipment and supplies appropriate to the environment are sourced according to specifications. 1.3 Personal protective equipment is used according to OHS guidelines. | ||||
2Assist in support tasks. | 2.1 Barricades, protective works and signs are erected, when required, according to supervisor instructions and organisational guidelines. 2.2 Surface positions are determined and marked according to accepted standards using information available from site drawings, references and relevant personnel. 2.3 Support tasks are carried out under direction, often in a team environment, and according to specifications. 2.4 Skills and knowledge are updated to accommodate work environment. | ||||
3Finalise the task. | 3.1 Site is restored as near as practicable to original condition. 3.2 Tools and equipment are inspected and, where appropriate, referred for repair. 3.3 Tools and equipment are cleaned and stored in a secure location. |
Required Skills
This section describes the essential skills and knowledge and their level, required for this unit. | |
Required skills: ability to relate to people from a range of social, cultural and ethnic backgrounds and with a range of physical and mental abilities communicate in a clear and concise manner in both written and verbal modes computer skills interpersonal skills e.g. cooperation and flexibility literacy skills to: assess and use workplace information interpret and understand basic legal, financial and procedural requirements process workplace documentation read and record data numeracy skills to: accurately record and collate undertake basic computations organisational skills to prioritise daily activities first aid (basic) | |
spatial skills to apply understanding of height, depth, breadth, dimension and position to actual operational activity (basic) technological skills (basic). | |
Required knowledge and understanding: industry ethics and practices legislation as it applies to the spatial information services industry sector (basic) safe work practices spatial data measuring and recording (basic). |
Evidence Required
The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, the range statement and the Assessment Guidelines for this Training Package.
Overview of assessment | This unit of competency could be assessed on its own or in combination with other units relevant to the job function, for example units CPPSIS2004A Assist in the selection, operation and maintenance of equipment and supplies, and CPPSIS2006A Assist with personnel and load transfer. |
Critical aspects for assessment and evidence required to demonstrate competency in this unit | A person who demonstrates competency in this unit must be able to provide evidence of: carrying out task instructions demonstrating critical aspects of working safely providing support in marking positions understanding the nature of spatial projects. |
Specific resources for assessment | Resource implications for assessment include access to: assessment instruments, including personal planner and assessment record book assignment instructions, work plans and schedules, policy documents and duty statements registered training provider of assessment services relevant guidelines, regulations and codes of practice suitable venue and equipment. Access must be provided to appropriate learning and assessment support when required. Where applicable, physical resources should include equipment modified for people with disabilities. |
Context of assessment | Holistic: based on the performance criteria, evidence guide, range statement, and required skills and knowledge. |
Method of assessment | Demonstrated over a period of time and observed by the assessor (or assessment team working together to conduct the assessment). Demonstrated competency in a range of situations, that may include customer/workplace interruptions and involvement in related activities normally experienced in the workplace. Obtained by observing activities in the field and reviewing induction information. If this is not practicable, observation in realistic simulated environments may be substituted. |
Guidance information for assessment | Assessment requires that the clients' objectives and industry expectations are met. If the clients' objectives are narrowly defined or not representative of industry needs, it may be necessary to refer to portfolio case studies of a variety of spatial information services requirements to assess competency. Oral questioning or written assessment and hypothetical situations (scenarios) may be used to assess underpinning knowledge (in assessment situations where the candidate is offered a preference between oral questioning or written assessment, questions are to be identical). Supplementary evidence may be obtained from relevant authenticated correspondence from existing supervisors, team leaders or specialist training staff. All practical demonstration must adhere to the safety and environmental regulations relevant to each State or Territory. Where assessment is for the purpose of recognition (recognition of current competencies [RCC] or recognition of prior learning [RPL]), the evidence provided will need to be authenticated and show that it represents competency demonstrated over a period of time. In all cases where practical assessment is used it will be combined with targeted questioning to assess the underpinning knowledge. Assessment processes will be appropriate to the language and literacy levels of the candidate and any cultural issues that may affect responses to the questions, and will reflect the requirements of the competency and the work being performed. |
Range Statement
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording in the performance criteria is detailed below. Add any essential operating conditions that may be present with training and assessment depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts.
Relevant personnel may include: | colleagues staff or employee representatives supervisors or line managers suppliers users. |
Organisational guidelines may include: | code of ethics company guidelines legislation relevant to the work or service function manuals OHS policies and procedures personnel practices and guidelines outlining work roles and responsibilities. |
Equipment and supplies may include: | data recording equipment measuring instruments personal computer-based digitising boards tools vehicles. |
Specifications may include: | budget data capture methods project deliverables personnel required resources needed timelines. |
Personal protective equipment may include: | breathing apparatus gloves helmets overalls masks and respirators safety boots safety glasses safety vests sun protection equipment. |
OHS may include: | Australian standards development of site safety plan identification of potential hazards inspection of work sites training staff in OHS requirements use of equipment and signage. |
Accepted standards may include: | Environment Protection Authority (EPA) recommendations state, territory and federal legislative requirements manufacturer instructions and specifications OHS standards organisational guidelines relevant industry codes of practice. |
Support tasks may include: | maintaining equipment identifying, determining and marking positions obtaining supplies recording data driving. |
Sectors
Unit sector | Spatial information services |
Employability Skills
The required outcomes described in this unit of competency contain applicable facets of employability skills. The Employability Skills Summary of the qualification in which this unit of competency is packaged, will assist in identifying employability skills requirements. |
Licensing Information
Refer to Application of the Unit