Application
This unit of competency supports the application of self-management and verbal and written communication skills, understanding of technology, interpreting legal requirements and technical writing. The skills and knowledge acquired upon completion of this unit would apply to the needs of employees in supporting positions for town planning, surveying and mapping. Legislative, regulatory requirements impact on this unit according to local, state, territory and federal legislation and regulations. |
Prerequisites
Nil |
Elements and Performance Criteria
ELEMENT | PERFORMANCE CRITERIA | ||||
1Identify nature and type of service requests. | 1.1 Requests are assessed to establish if they are within the jurisdiction and ability of the building or planning area of relevant authority. 1.2 Requests are assessed to establish necessity for compliance with statutory requirements. 1.3 Time required to service requests is established to identify if an immediate response is required. | ||||
1.4 Requests requiring additional research are prioritised and recorded to ensure important matters are finalised promptly. 1.5 Skills and knowledge are updated to accommodate changes in nature of service request. | |||||
2Research information relevant to service requests. | 2.1 Accurate research and action are undertaken in order of priority to obtain required information. 2.2 Information is collated to enable preparation of a satisfactory response. 2.3 Professional advice is identified and incorporated where appropriate. | ||||
3Develop a submission for the request. | 3.1 Base plan and draft subdivision or development proposal are prepared using current design guidelines. 3.2 Development process and appropriate application documentation are explained to the client. 3.3 Physical constraints and environmental impact of the development are incorporated into the application. 3.4 Availability of existing services and costs of supply are investigated. 3.5 Local government and utility authority contributions are determined. 3.6 Engineering aspects in subdivision design are considered and documented appropriately according to local government requirements. 3.7 Response is prepared according to OHS and legislative requirements, and organisational guidelines. 3.8 Pertinent legal and statutorystandards are considered and adhered to. | ||||
4Monitor approval process. | 4.1 Assessment criteria for approval are further examined. 4.2 Advertising and exhibition requirements are observed. 4.3 Approval or refusal outcomes are reviewed according to organisational guidelines. | ||||
5Communicate information and advice. | 5.1 Written information and advice provided are clear and concise to minimise the need for follow-up action. 5.2 Verbal advice is presented clearly and in a courteous manner to minimise the need for follow-up action. 5.3 Advice is recorded according to organisational guidelines. 5.4 Rights of appeal are explained to the client where appropriate. |
Required Skills
This section describes the essential skills and knowledge and their level, required for this unit. | |
Required skills: ability to relate to people from a range of social, cultural and ethnic backgrounds and with a range of physical and mental abilities analytical skills ability to translate requirements into design communication skills to: consult effectively with clients and colleagues impart knowledge and ideas through oral, written and visual means computer skills (high technical user level) to complete business documentation interpreting project requirements interpreting technical requirements literacy skills to: assess and use workplace information locate and interpret legislation and other written documentation prepare and manage documentation read and write technical reports research and evaluate negotiation skills numeracy skills to: analyse errors conduct image analysis interpret and analyse statistics perform mental calculations record with accuracy and precision undertake computations organisational skills to: coordinate technical and human resource inputs to research activities prioritise activities to meet contractual requirements spatial skills to: exercise precision and accuracy in relation to spatial and aspatial data design perform spatial data archival and retrieval and train others in this task perform spatial data management and manipulation and train others in this task perform file management and train others in this task solve problems relating to height, depth, breadth, dimension, direction and position in actual operational activity and virtual representation understand implications of height, depth, breadth, dimension and position to actual operational activity and virtual representation working in a team. | |
Required knowledge and understanding: data formats errors, accuracy and precision in technical reporting industry standards organisational policies and guidelines, such as OHS guidelines planning and control processes possible community issues and repercussions with regard to building permits safe work practices surveying reference systems surveying data capture and data set out methodologies understanding and application of road alignment design and associated computations. |
Evidence Required
The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, the range statement and the Assessment Guidelines for this Training Package.
Overview of assessment | This unit of competency could be assessed on its own or in combination with other units relevant to the job function, for example unit CPPSIS4003A Facilitate effective spatial client relationships. |
Critical aspects for assessment and evidence required to demonstrate competency in this unit | A person who demonstrates competency in this unit must be able to provide evidence of: matching objectives with resources to ensure project proceeds in an organised and timely manner taking responsibility for own outputs in work and learning ensuring that non-conformity aspects are recorded and reported ensuring that achievement of required accuracy has been attempted by: accessing and interpreting design information to identify the components to be measured and monitored applying solutions to a range of problems documenting and reporting organising and prioritising activities providing timely and accurate advice. |
Specific resources for assessment | Resource implications for assessment include access to: assessment instruments, including personal planner and assessment record book assignment instructions, work plans and schedules, policy documents and duty statements registered training provider of assessment services relevant guidelines, regulations and codes of practice suitable venue and equipment. |
Access must be provided to appropriate learning and assessment support when required. Where applicable, physical resources should include equipment modified for people with disabilities. | |
Context of assessment | Holistic: based on the performance criteria, evidence guide, range statement, and required skills and knowledge. |
Method of assessment | Demonstrated over a period of time and observed by the assessor (or assessment team working together to conduct the assessment). Demonstrated competency in a range of situations, that may include customer/workplace interruptions and involvement in related activities normally experienced in the workplace. Obtained by observing activities in the field and reviewing induction information. If this is not practicable, observation in realistic simulated environments may be substituted. |
Guidance information for assessment | Assessment requires that the clients' objectives and industry expectations are met. If the clients' objectives are narrowly defined or not representative of industry needs, it may be necessary to refer to portfolio case studies of a variety of spatial information services requirements to assess competency. Oral questioning or written assessment and hypothetical situations (scenarios) may be used to assess underpinning knowledge (in assessment situations where the candidate is offered a preference between oral questioning or written assessment, questions are to be identical). Supplementary evidence may be obtained from relevant authenticated correspondence from existing supervisors, team leaders or specialist training staff. All practical demonstration must adhere to the safety and environmental regulations relevant to each State or Territory. Where assessment is for the purpose of recognition (recognition of current competencies [RCC] or recognition of prior learning [RPL]), the evidence provided will need to be authenticated and show that it represents competency demonstrated over a period of time. In all cases where practical assessment is used it will be combined with targeted questioning to assess the underpinning knowledge. Assessment processes will be appropriate to the language and literacy levels of the candidate and any cultural issues that may affect responses to the questions, and will reflect the requirements of the competency and the work being performed. |
Range Statement
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording in the performance criteria is detailed below. Add any essential operating conditions that may be present with training and assessment depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts.
Requests may include: | copies of plans complaints local government requirements problems property requirements technical advice |
verbal (face to face or telephone) written. | |
Jurisdiction and ability may include: | copyright freedom of information local government policy relevant building and planning legislation state, territory and federal Acts and policies. |
Response may include: | verbal written. |
Research may include: | checking local government reports literature survey obtaining telephone information statutory controls. |
Information may include: | boundary dimensions design information: digital hard copy plans maps written instructions land title topographic features. |
Professional advice may include: | builders engineers statutory authorities surveyors town planners. |
Design may include: | digital information hard copy plans maps. |
Appropriate application documentation: | is determined by local government. |
Client may include: | builder developer land owner local government representative |
organisational representative private citizen. | |
Physical constraints may include: | drainage, including: lot drainage road pavement drainage easements public reserve requirements sediment control sewerage control. |
Engineering aspects in subdivision design may include: | design engineering criteria requirements for: crossfalls cul de sacs cycleways gradients intersections kerb returns road widths theory notes design methods using contours information detail assessment of an approved set of examinations engineering design requirements for: lot drainage road pavement drainage location of utility services within the footpath area and to proposed lots preparation of: information to be shown plan types preliminary design plans provision for alteration of existing services for: easement requirements public reserve requirements sediment control typical utility service allocations provision for sewerage typical drafting standards for plans. |
OHS may include: | Australian standards development of site safety plan identification of potential hazards inspection of work sites training staff in OHS requirements use of equipment and signage. |
Legislative requirements may include: | Australian standards award and enterprise agreements certification requirements codes of practice equal employment opportunity (EEO) quality assurance requirements. |
Organisational guidelines may include: | appropriate timelines code of ethics company policy final product formats formal design parameters legislation relevant to the work or service function manuals OHS policies and procedures personnel practices and guidelines outlining teamwork, work roles and responsibilities requirements for data processing. |
Legal and statutory standards may include: | aspects of cadastral law common law and old system title community title crown land, alienation and native title local government requirements national standards state statutes and regulations subdivisions and deposited plans (including roads) Torrens title system (indefeasibility and the need for registration), including: caveat dealing covenant dealing easement dealing lease dealing mortgage dealing. |
Sectors
Unit sector | Spatial information services |
Employability Skills
The required outcomes described in this unit of competency contain applicable facets of employability skills. The Employability Skills Summary of the qualification in which this unit of competency is packaged, will assist in identifying employability skills requirements. |
Licensing Information
Not Applicable