CUAWOR301
Document equipment installation requirements


Application

This unit describes the performance outcomes, skills and knowledge required to document requirements for installing equipment in areas such as lighting, audio and vision for productions in the screen, media, entertainment and events industries.

At this level, individuals are expected to use some discretion and judgement and they operate under broad supervision within an established framework of plans and procedures.

No licensing, legislative or certification requirements apply to this unit at the time of publication.


Elements and Performance Criteria

Elements

Elements describe the essential outcomes.

Performance Criteria

Performance criteria describe the performance needed to demonstrate achievement of the element.

1. Prepare to document installation requirements

1.1 Discuss technical installation requirements with relevant personnel to determine types of working documents required

1.2 Clarify own level of responsibility in documenting equipment installation requirements

1.3 Check version control information on plans, drawings and specifications to ensure use of current documents

1.4 Analyse material and seek clarification on issues as required

1.5 Check plans and specifications for compliance with relevant regulatory requirements

2. Complete documentation

2.1 Calculate or estimate length and number of cable and multicore runs required

2.2 Refine accuracy of estimates by taking measurements in venues or on location as required

2.3 Calculate weight of each section of rigged equipment and check weight calculations against weight-bearing capacity of rigging points and support structures

2.4 Calculate power requirements, component loadings and perform other calculations relevant to the type of installation

2.5 Determine patching and routing requirements

3. Finalise documentation requirements

3.1 Bring calculations with unsatisfactory results or compliance concerns to attention of supervisor

3.2 Use calculations and estimates to prepare and submit working documents within agreed timeframes

3.3 Seek feedback on quality of working documents from relevant personnel and note areas for future improvement

Evidence of Performance

Evidence of the ability to:

create working documents to support the installation of technical equipment in area of specialisation on at least two occasions

correctly interpret plans and specifications related to the installation of technical equipment when creating working documents

work collaboratively.

Note: If a specific volume or frequency is not stated, then evidence must be provided for each of the above points at least once.


Evidence of Knowledge

To complete the unit requirements the individual must:

describe the main features of plans and drawings used in the process of installing audio, lighting or vision system equipment

describe how scale measurements are used in plans

explain commonly used symbols and abbreviations found in plans, drawings and specifications related to the installation of technical equipment

explain how basic formulas apply when documenting equipment installation requirements.


Assessment Conditions

Assessment must be conducted in a safe environment where evidence gathered demonstrates consistent performance of typical activities experienced in creative arts industry environments. The assessment environment must include access to plans and specifications in relation to lighting, audio or vision system requirements.

Assessors of this unit must satisfy the requirements for assessors in applicable vocational educational and training legislation, frameworks and/or standards.


Foundation Skills

This section describes language, literacy, numeracy and employment skills incorporated in the performance criteria that are required for competent performance.

Skill

Performance Criteria

Description

Learning

3.3

Seeks the views of others to identify areas for improvement in own job performance

Reading

1.3, 1.4, 1.5

Interprets plans and specifications when installing technical equipment

Writing

3.2, 3.3

Generates documentation in relation to equipment installation requirements

Documents outcomes of feedback about own work performance

Oral communication

1.1, 1.2, 1.4, 3.1, 3.3

Obtains information by listening and questioning

Uses clear language to express ideas and convey information

Numeracy

2.1, 2.2, 2.3, 2.4, 3.2

Brings scale plans up to 1:1 through correct interpretation of scaling notation

Takes measurements and makes calculations when installing equipment

Navigate the world of work

1.1, 1.2, 1.3, 1.5, 3.1

Identifies and follows procedures and expectations associated with own role

Complies with organisational requirements regarding the installation of technical equipment

Interact with others

1.1, 1.2, 1.4, 3.1, 3.3

Works collaboratively to achieve requirements

Get the work done

1.1, 1.2, 1.3, 1.4, 1.5, 2.1, 2.2, 2.3, 2.4, 2.5, 3.1, 3.2

Plans and organises own workload to achieve tasks within timelines

Plans a range of routine, and some non-routine, tasks, accepting stated goals and aiming to achieve them efficiently

Recognises and responds to predictable routine problems related to role in the immediate work context

Seeks assistance when problems are beyond immediate responsibilities or experience

Applies knowledge of technical equipment to work activities

Uses standard word processing and spreadsheet applications to complete workplace documentation


Sectors

Industry capability - workplace effectiveness