Application
Experienced lighting technicians or operators in the screen, media and entertainment industries apply the skills and knowledge outlined in this unit. At this level, they are expected to be reasonably creative and innovative in experimenting with the possibilities presented by advanced features of lighting systems. They must be able to exploit the full capabilities of contemporary lighting systems in ways that are consistent with the aesthetics envisaged for productions. Even though people at this level work autonomously, they are members of a production team and need to work collaboratively with lighting designers and directors to achieve creative outcomes. They are often responsible for supervising junior lighting technicians. |
Prerequisites
This unit must be assessed with or after the following units which cover skills and knowledge essential to this unit: CUFLGT302A Record and operate standard lighting cues CUFLGT402A Set up, record and operate lighting cues and effects. | ||
Elements and Performance Criteria
ELEMENT | PERFORMANCE CRITERIA |
1. Determine production requirements | 1.1. Evaluate production documentation to establish creative and technical parameters 1.2. Liaise with relevant colleagues to determine scope of lighting requirement 1.3. Assess the capabilities of equipment to deliver required effects and liaise accordingly |
2. Connect and format advanced fixtures to control system | 2.1. Check console fixture library to ensure correct inventory exists and is operational 2.2. Connect console to advanced fixtures through appropriate control protocol and check to ensure designer's control requirements can be achieved 2.3. Use experimentation to test the capabilities of advanced fixtures 2.4. Set up softpatch required for production to ensure advanced fixtures are connected to appropriate control surfaces 2.5. Format presets for advanced fixtures in accordance with requirements of designer 2.6. Accurately maintain electronic and paper plots in accordance with changes to original setup |
3. Program console to receive pre-recorded material from an external source | 3.1. Assess protocol, program type and connectivity of external source material for compatibility with main console 3.2. Complete appropriate back-ups of external source material prior to transfer to main console 3.3. Make appropriate assessment of the need for any changes to source material to address venue system and correctly determine whether changes can be made on external device of main console 3.4. Correctly set up main console and external device and use appropriate techniques to transfer material 3.5. Make appropriate checks to ensure successful transfer and take action accordingly |
Required Skills
|
Required skills |
communication and negotiation skills particularly in relation to liaisons with designers and directors logical programming and sequencing for automated lighting literacy skills sufficient to interpret production documentation numeracy skills sufficient to complete simple mathematical calculations and memorise numbers for channel selection |
Required knowledge |
the expressive qualities of lighting as it relates to the nature of the work, the style of the production and the qualities of the performance design interpretation and issues associated with maintaining design integrity in the context of lighting visualising the effects of lighting on the stage techniques for translating concepts into creative and workable solutions lighting control concepts used and advanced fixtures used in a wide range of lighting systems a wide range of lanterns and accessories, their uses and operations (optical and mechanical) the elements of lighting design and their impact on the lighting technician problem solving techniques colour recognition and the various colour media used in lighting control protocols for a range of automated lighting fixtures documentation and back-up systems used in conjunction with lighting control relevant organisational and legislative occupational health and safety requirements, including working with electricity basic electronics (just 'electronics' is too broad to be in this unit) |
Evidence Required
The Evidence Guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package. | |
Overview of assessment | |
Critical aspects for assessment and evidence required to demonstrate competency in this unit | The following evidence is critical to the judgement of competence in this unit: ability to accurately record and reproduce lighting cues to instruction in a given timeframe support for the lighting design process through creative use of the advanced fixtures by skilful and efficient operation of the console. |
Context of and specific resources for assessment | The assessment context must provide for: practical demonstration of skills to produce lighting effects for three different productions, which require experimentation with different effects involvement of and interaction with a production and design team to reflect the collaborative nature of the process. |
Method of assessment | Assessment may incorporate a range of methods to assess performance and the application of essential underpinning knowledge, and might include: evaluation of the lighting effects produced by the candidate evaluation of reports produced by the candidate detailing the experimentation process to produce required effects evaluation of a presentation by the candidate detailing processes used to produce various effects oral or written questioning to assess technical knowledge review of portfolios of evidence and third party workplace reports of on-the-job performance by the candidate. Assessment methods should closely reflect workplace demands and the needs of particular groups (e.g. people with disabilities, and people who may have literacy or numeracy difficulties such as speakers of languages other than English, remote communities and those with interrupted schooling). |
Guidance information for assessment | Assessment of this unit requires access to: a range of lighting equipment as identified in the Range Statement, including automated lighting a production venue. |
Range Statement
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included. | |
Relevant colleagues may include: | designer director programmers for advanced fixtures stage manager other specialist staff |
Advanced fixtures must include: | automated lighting fixtures both motorised yoke and moving mirror colour scrollers |
Advanced fixtures may include: | digitally controlled projection equipment LED colour change equipment robotic and automated stage equipment WYSIWYG and computer programming rendering programs |
Material to be read and interpreted may include: | colour lists cue sheets equipment lists focus notes instructions for advanced fixtures instructions for computerised lighting boards lighting plan manuals patch sheets running sheets script |
All work is carried out in accordance with: | lighting plan and other documentation as appropriate organisation standards organisational and legislative occupational health and safety requirements other resource constraints production and/or venue requirements production schedule relevant Australian standards, including electrical standards in accordance with State/Territory regulations technical constraints |
Sectors
Unit sector |
Competency Field
Media and entertainment production - lighting |
Employability Skills
This unit contains employability skills. |
Licensing Information
Not applicable.