Mechanists and staging personnel apply the skills and knowledge outlined in this unit. In this role they are responsible for operating manual and automated flying systems that raise and lower soft hangings and flats, as well as 'flying' scenery items into and off the stage.

This unit has linkages to a range of other staging units and combined assessment and/or training with those units may be appropriate.

ELEMENT

PERFORMANCE CRITERIA

1. Set fly cues

1.1. Correctly interpret production documentation to determine flying requirements

1.2. Accurately plot fly cues and determine correct speed and timing of each cue

1.3. Make modifications and changes in accordance with organisational procedures and safety requirements

1.4. Liaise with other production and performance personnel to ensure correct setting of cues

2. Make pre-operational checks

2.1. Complete pre-show checks to ensure individual components of the flying system are ready for operation and comply with all safety requirements

2.2. Correctly execute the pre-set and accurately document any modifications

3. Operate flying systems

3.1. Operate flying system correctly and safely, ensuring that cues are executed on direction in accordance with performance requirements

3.2. Use flying system within its rated capacity and within an acceptable safety margin

3.3. Where counterweight systems are used, keep the flown load and the counterweights in balance and/or under control

3.4. Use the brake system, handbrake or other stopping devices safely and appropriately

3.5. Use control systems in accordance with instructions

3.6. Promptly identify any problems with flying system operation and rectify or refer to appropriate personnel in accordance with organisational procedures and safety regulations

3.7. Correctly use communication systems and signals in accordance with organisational procedures and relevant safety requirements

3.8. Reset all flying elements at completion of performance in accordance with organisational procedures and safety regulations

3.9. Make reports to relevant personnel on any aspects of system operation requiring attention

Required skills

communication requirements between different production personnel

communication systems and correct signals for use when flying

numeracy skills sufficient to undertake all calculations associated with the operation of theatrical flying systems

literacy skills sufficient to both interpret and make modifications to production documentation

Required knowledge

the role of flying systems within different types of production, and the links between flying and other aspects of a production

different types of flying elements

knowledge of a range of flying systems and relevant operating techniques

specific safety issues that impact on flying systems, including regulations about the scope of work that can be undertaken by unlicensed personnel

sequencing, equipment, timing and speed requirements for flying systems in the context of different types of production

emergency procedures relevant to flying system operation

knowledge of counterweight systems, including single and double purchase, loading and unloading cradles, swinging bars, safe working loads, spreading the load and where to hang lighting bars, masking, etc

The Evidence Guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.

Overview of assessment

Critical aspects for assessment and evidence required to demonstrate competency in this unit

The following evidence is critical to the judgement of competence in this unit:

application of safe working practices when operating flying systems

knowledge of safety issues and regulations associated with theatrical flying.

Context of and specific resources for assessment

The assessment context must ensure:

practical demonstration of skills through the operation of flying systems for more than one production

involvement of and interaction with a team to reflect the collaborative nature of the production process.

Method of assessment

Assessment may incorporate a range of methods to assess performance and the application of essential underpinning knowledge, and might include:

direct observation of the candidate operating flying systems correctly and safely

oral or written questioning to assess knowledge of safety issues and different operating and communication techniques

review of portfolios of evidence and third party workplace reports of on-the-job performance by the candidate.

Assessment methods should closely reflect workplace demands and the needs of particular groups (e.g. people with disabilities, and people who may have literacy or numeracy difficulties such as speakers of languages other than English, remote communities and those with interrupted schooling).

Guidance information for assessment

Assessment of this unit requires access to:

a venue in which a theatrical flying system is installed

a production for which to operate flying systems.

The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.

Safety requirements refers to:

both specific organisational requirements and statutory authority requirements

Types of flying systems may include:

belaying, abseiling equipment

block and tackle systems

chain crawlers

chain motors and chain blocks

electrically operated winches

electrically powered flying systems

hand lines

hydraulic flying systems

manually operated counterweight systems (single or double purchase)

manually operated winches

pulley systems

Note: installation of some of these systems must be completed by or under the supervision of licensed personnel.

Problems that occur with flying systems may include:

failure of performers and workers to observe warnings of flying activities

inadequate tie-off applications

incorrect balance of load

overload on system

slippage of wore ropes from pulleys

Communication systems and signals may include:

hand signals

screen monitor

verbal calls, with or without headsets

warning lights

watching for the cue

written instructions

Flying elements may include:

lighting, e.g.: truss, lanterns, practicals, special effects

machinery and equipment, e.g.:

smoke machines

fog machines

lasers

vehicles

performers

scenery, e.g.:

flats

doors

windows

legs

borders

soft hangings, e.g.:

legs

borders

cycloramas

masking

tabs

sound, e.g.: speakers

Unit sector

Media and entertainment production - staging

It is strongly recommended that this unit be assessed with or after the following unit:

CUESTA06B

Apply a general knowledge of theatrical rigging

This unit contains employability skills.