Application
The skills and knowledge covered by this unit are applied in a workshop environment and include all phases of the process for cutting a variety of opal shapes to accepted industry standards and using equipment safely.
Where appropriate the outcomes of this unit could be contextualised to apply to other gemstones.
Prerequisites
Not applicable.
Elements and Performance Criteria
1. Prepare to cut an opal solid | 1.1 Identify and obtain consumables required for cutting an opal solid 1.2 Select tools and equipment to be used 1.3 Determine jewellers’ cuttingangle requirements 1.4 Dop pre-form on appropriate dop stick using wax or adhesive as appropriate 1.5 Follow general OHS principles and safe operating procedures when using tools, equipment, machinery and consumables for opal cutting |
2. Cut and polish top surface of opal | 2.1 Fine grind shape and dome ensuring continuity of contour and maintaining jewellers’ setting angles 2.2 Sand opal to remove grinding marks using appropriate sanding papers or diamond wheel 2.3 Polish top surface of opal with polishing compound to a high lustre |
3. Cut and polish back surface of opal | 3.1 Remove stone from dop, turn over and replace on dop checking alignment 3.2 Grind the back of the stone to jewellers’ standards maintaining continuity of form and alignment 3.3 Sand to remove grinding marks and polish if required 3.4 Remove the stone from the dop and clean the stone |
4. Treat opal specimen | 4.1 Select opal specimen for treatment and check to ensure it will benefit from treatment 4.2 Grind, sand and polish selected area 4.3 Treat the selected area 4.4 Clean or neutralise as required |
Required Skills
Required skills
planning and organising skills to plan work logically
problem-solving skills to identify and address common cutting and polishing problems
numeracy skills to use numerical features of machinery
technical skills to cut and polish opals using correct technique.
Required knowledge
characteristics of opal gemstone structure
processes and consumables needed for cutting and polishing opals
safety issues associated with opal cutting and polishing machinery.
Evidence Required
The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.
Overview of assessment | |
Critical aspects for assessment and evidence required to demonstrate competency in this unit | Evidence of the ability to: apply knowledge of the processes for cutting and polishing opals in a range of shapes achieve a high quality finish that satisfies the requirements of the jewellery industry. |
Context of and specific resources for assessment | Assessment must ensure access to an opal-cutting workshop with stones and equipment. |
Method of assessment | A range of assessment methods should be used to assess practical skills and knowledge. The following examples are appropriate for this unit: observation of processes and procedures oral and/or written questioning on underpinning knowledge and skills evaluation of the final product review of portfolios of evidence review of third-party workplace reports of on-the-job performance by candidate. Assessment methods should closely reflect workplace demands (e.g. literacy) and the needs of particular groups (e.g. people with disabilities, and people who may have literacy or numeracy difficulties, such as speakers of languages other than English, remote communities and those with interrupted schooling). |
Guidance information for assessment | Holistic assessment with other units relevant to the industry sector workplace and job role is recommended. |
Range Statement
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.
Consumables may include: | cerium or tin oxide cleaning spirit diamond or silicon carbide wheels #220 or #360 diamond polishing compound #2400 to #100000 diamond polishing wheels #3000 to #50000 diamond sanding wheels #280 to #1200 felt or leather buffs silicon carbide sanding paper #180 to #600 wax or adhesives for dopping. |
Equipment may involve: | appropriate ventilation grinding machinery personal protective equipment (PPE) polishing machinery sanding machinery saws. |
Jewellers’ cutting angle requirements may include: | 10º to 12º side angle (from setting edge to start of dome) 35º to 45º back setting edge (standard solid) all sharp edges or acute angles to be slightly rounded flat or domed back high overall polish and free of defects proportions of low, medium and high domes to be maintained sanded or polished back setting edge to be straight and parallel to back thickness of stone not to exceed 2/3 of width (standard solid) tolerance for standard millimetre sizes, 0.2mil. + or − when leaving potch or boulder on back of stone, maintain proportions in relation to stone size, i.e. approx. 2/3 of width. |
General OHS principles and safe operating procedures may include: | complying with the safe operating procedures for each machine or process good housekeeping using PPE where required. |
Shape and dome may include: | a variety of other shapes cabochon dome – high, medium and low free form rectangles shapes. |
Treatment may include: | sugar and acid treatment sugar and heat treatment. |
Sectors
Opal cutting and polishing
Employability Skills
This unit contains employability skills.
Licensing Information
No licensing, legislative, regulatory or certification requirements apply to this unit at the time of endorsement.