DEFDV006B
Dive using closed-circuit breathing apparatus (O2) in open water to a maximum depth of 10 metres

This unit covers the competency required to dive using closed circuit breathing apparatus (CCBA) (O2) in an open water environment to a maximum depth of 10 metres.This unit of specifically covers those aspects of performance unique to CCBA (O2), such as operating the oxygen compressor/hand-booster pump, inspecting and operating CCBA (O2) equipment, and conducting CCBA (O2) specific contingency drills.

Application

As agreed in the creation of this Training Package, applications for units transferred from the PUA00 Public Safety Training Package will be developed as part of continuous improvement plans, and taking into account the change in Unit of Competency format as detailed in templates for Streamlined Training Packages.


Prerequisites

DEFDV001B Dive using self-contained underwater breathing apparatus in open water to 30 metres.


SISOSCB307A . Inspect and fill SCUBA cylinders.


Elements and Performance Criteria

ELEMENT

PERFORMANCE CRITERIA

1. Operate an oxygen compressor/hand-booster pump

1.1 Compressor and associated equipment are inspected for serviceability.

1.2 Protective equipment is fitted.

1.3 Leads and hoses are connected to the compressor.

1.4 Gas cylinders are charged to maximum working pressure and details are recorded in relevant logs.

1.5 Operator level maintenance is performed on the compressor.

1.6 Compressor is de-serviced after use.

2. Conduct dive operations

2.1 CCBA (O2) is selected, inspected for serviceability, and fitted and tested (both out of water and in-water).

2.2 Dives are conducted using CCBA (O2) and dive contingencies are demonstrated.

2.3 CCBA (O2) is de-serviced and defects are reported in accordance with organisational procedures.

Required Skills

This describes the essential skills and knowledge and their level, required for this unit.

Required Skills

conduct buddy breathing

conduct ditching drills

conduct lost buddy drills

conduct unconscious companion diver drills

fit and check CCBA (O2)

identify distress and illness in others at depth

inspect and prepare CCBA (O2)

monitor CCBA (O2) equipment and gauges

recover and clear mask and mouthpiece

refurbish CCBA (O2) post-dive

Required Knowledge

CCBA (O2) characteristics and limitations

CCBA (O2) dive equipment characteristics and limitations

dive physics

dive physiology and medicine

general occupational/diving safety awareness

hazards of diving on pure oxygen

hazards of oxygen

marine animal threats

marine hazards

oceanography

relevant references and Australian Standards

safe operating ranges for air-supplies

Evidence Required

Critical aspects for assessment and evidence required to demonstrate competency in this unit

Assessment must confirm the ability to:

prepare equipment for the dive including charging cylinders

arrange for others to check equipment

maintain equipment during the dive

refurbish equipment postdive

handle nonfunctional equipment items

safely enter and exit the water appropriate to the launch platform, equipment and conditions

conduct inwater checks

recover and clear mask and mouthpiece

switch from primary to the reserve air system

implement contingency and emergency drills such as:

ditching drills

buddy breathing

unconscious companion diver drills.

Consistency in performance

Competency will be demonstrated over a minimum of 30 dives with the diver diving to a depth not greater than 10 m using CCBA (O2) in open water that includes the following requirements:

oceans, seas, lakes and rivers

day and night

subsurface conditions:

current (0–2 knots)

visibility (0 metre +)

temperature (0 degrees +)

a range of surface and subsurface hazards.

Table 1 (below) outlines the minimum dives required by this Unit of Competency.

Table 1

Condition

No of Dives

Inwater time

Remarks

Between 010 m

30

1 200 min

Total accrued sub-surface time (010 m)

Special Qualifiers (included within above)

Night 010 m

10

400 min

Context of and specific resources for assessment

Context of assessment

Competency will be assessed in the ocean over a range of oceanic, diurnal and nocturnal environments, supported by questioning on shore or aboard vessels.

When practicable, assessment should relate to the diver’s vocational focus.

Specific resources for assessment

Access to complete range of CCBA (O2) diving, safety and accessory equipment.


Range Statement

The Range Statement relates to the Unit of Competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording in the Performance Criteria is detailed below.

Open water environment may include:

day or night

oceans, seas, lakes and rivers

subsurface conditions:

current (0–2 knots)

visibility (0 metre +)

temperature (0 degrees +)

surface and subsurface hazards such as:

anchor drop zones

cathodic protection devices

electrical cabling

inlets and sonar/radio frequency hazards

marine animals

piers and jetties

pipelines

pollutants

propellers/thrusters

trapping hazards:

beams

culverts

gates

grottoes and caves

intakes and outfalls

nets

safety, anchor and communications lines

sewers

submerged ships, vehicles and structures

sluices

vessel rocking and associated movement

Associated equipment includes:

hoses

pumps

Protective equipment may include:

gloves

goggles

Operator level maintenance includes:

checking existing pressure in cylinders with pressure gauge

conducting charging in (O2) clean environment

following correct charging procedure and charging rate

operating high pressure charging panels

CCBA (O2) includes:

counter-lung

emergency cylinder

facemask/mouthpiece

oxygen cylinder

scrubber material

Dive contingencies include:

air supply stoppage

buddy breathing

companion diver

flooded mask

fouled supply

hose blockage/choking

hose Rupture

set to 35 bar


Sectors

Not applicable.


Employability Skills

This unit contains employability skills.


Licensing Information

Not applicable.