Application
As agreed in the creation of this Training Package, applications for units transferred from the PUA00 Public Safety Training Package will be developed as part of continuous improvement plans, and taking into account the change in Unit of Competency format as detailed in templates for Streamlined Training Packages.
Prerequisites
Elements and Performance Criteria
ELEMENT | PERFORMANCE CRITERIA |
1. Prepare for cutting and welding underwater | 1.1 Work task, worksite data and work object (including composition and condition) are determined and analysed to determine the specific requirements for thermal cutting and welding tools. 1.2 Work plan is developed consistent with the dive plan. 1.3 Thermal cutting and welding tools, and protective equipment appropriate to the task are selected, inspected and prepared. 1.4 Electrical generator and associated leads are selected, inspected and prepared. 1.5 Oxy-acetylene gas cylinders and associated hoses are selected, inspected and prepared. 1.6 Thermal cutting and welding tools, the generator, oxy-acetylene gas cylinders, and associated leads and hoses are secured safely to/from the dive site. 1.7 Access obstructions and other hazards are assessed and action is taken to remove/reduce risk. |
2. Operate thermal cutting and welding tools underwater | 2.1 Thermal cutting and welding tools are secured on self during the dive for ease of accessibility and lack of interference with mobility and dive equipment. 2.2 Safe routes for leads and hoses to the worksite are established. 2.3 Work-safe area is established and location and safety of divers is confirmed prior to commencing work tasks. 2.4 Surface of the work object is prepared for the cut or weld. 2.5 Voltage and amperage of arc-welding equipment is controlled. 2.6 Gas supplies are turned on and ratios of oxygen and acetylene are set and adjusted. 2.7 Pressure of oxy-acetylene torch is controlled. 2.8 Cuts and welds are made ensuring minimal distortion to the object. 2.9 Employment hazards of cutting and welding tools are managed. 2.10Thermal cutting and welding tools are temporarily disconnected and rendered safe to evaluate the work task. 2.11Cuts and welds are inspected and cleaned. |
3. Operate the generator | 3.1 Pre-start checks are performed and leads are connected. 3.2 Power is developed gradually without surging and generator is stabilised and trimmed to required work output. 3.3 Routine operational checks are conducted and warning signs are diagnosed and addressed. 3.4 Generator is shut down. 3.5 Emergency shut-down drills are conducted.. |
4. Conclude underwater cutting and welding operations | 4.1 Environmental impact arising from use of thermal cutting and welding tools is minimised and waste products are recovered. 4.2 Thermal cutting and welding tools, the generator, gas cylinders and associated leads and hoses, and protective equipment are de-serviced after use. |
Required Skills
This describes the essential skills and knowledge and their level, required for this unit. |
Required Skills |
ability to dive cut steel plates diagnose equipment faults operate a generator take remedial actions undertake general operator maintenance weld |
Required Knowledge |
control of output dangers of trapped gas and its avoidance dive equipment dive physics equipment (generator, thermal cutting and welding, tools, hoses and leads) general occupational/diving safety awareness methods of resolving problems oceanography physics of operation principles of operation relevant references and Australian Standards thermal cutting and welding on land work hazards |
Evidence Required
Critical aspects for assessment and evidence required to demonstrate competency in this unit | Assessment must confirm the ability to: cut a12 mm steel plate using a thermal arc or oxy arc cutting torch weld together two pieces of approximately 12 mm steel plate underwater using electric welding equipment to produce a fillet weld attend to personal and collective safety consider the environmental impact as part of the dive plan. Consistency in performance Competency should be demonstrated during a number of work tasks where: the depth is between 5 metres and 20 metres at least one night work task is undertaken. |
Context of and specific resources for assessment | Context of assessment Competency should be assessed in the ocean. When practicable, assessment should relate to the diver’s vocational focus. Specific resources for assessment Access to a dive location, and thermal cutting and welding equipment. |
Range Statement
The Range Statement relates to the Unit of Competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording in the Performance Criteria is detailed below. | |
Work tasks may include: | cutting gouging heating welding |
Worksite data may include: | current depth gradient hazards obstacles |
Work object may include: | anchorage pipe sheet (hull) support/strut |
Composition may include: | aluminium high and low alloy steels high and low carbon steels mild steel stainless steel |
Thermal cutting and welding tools may include: | oxy-torch arc-welder |
Protective equipment may include: | boots eye protection gloves hood/helmet |
Selecting, inspecting and preparing thermal cutting and welding tools may include: | inspection of stick neck/mouth of oxy-torch regulation of amperage and voltage security of earth (bull-dog) lead |
Selecting, inspecting and preparing the generator may include: | checking fluids fuelling pre-start checks |
Selecting, inspecting and preparing the oxy-acetylene gas cylinders may include: | checking gas lines checking gas pressures and mixing ratios physical security of bottles |
Hazards may include: | danger zone of objects being worked on impact on dive equipment (e.g. hoses, gauges, communications) release of fuels and associated chemical contaminants resident at the worksite retinal damage shock and burn trapped air explosions |
Action to remove/reduce the risk may include: | erecting signage using patrol/sentry craft |
Routine operational checks may include: | fuel fluids pressure temperature |
Warning signs may include: | feed variations rise/fall in temperature smoke surging (rise/fall in power) unusual noise unusual smell (e.g. oil) |
Environmental impact includes: | contamination of surrounding water (e.g. leaking oil) physical damage to reef and associated floor eco-systems (e.g. coral) visual pollution of waste material (e.g. concrete and metal parts) |
De-servicing may include: | drying logging work details into equipment logs oiling/greasing refilling re-fuelling washing in fresh water |
Sectors
Not applicable.
Employability Skills
This unit contains employability skills.
Licensing Information
Not applicable.