Application
The unit involves shifting forestry logs using trucks in a forest environment setting The skills and knowledge required for competent workplace performance are to be used within the scope of the person's job and authority |
Prerequisites
Not Applicable
Elements and Performance Criteria
ELEMENT | PERFORMANCE CRITERIA |
1. Plan log movement | 1.1. Applicable occupational health and safety (OHS), environmental, legislative and organisational requirements relevant to shifting forestry logs using trucks are identified and followed 1.2. Work order is reviewed and clarified with appropriate personnel 1.3. Type of truck, ancillary equipment, accessories and configuration to be operated are checked for serviceability in line with manufacturer specifications and statutory regulations 1.4. Logging sites and logs to be transported are identified from schedules, work orders and harvesting site personnel 1.5. Truck loads, transport routes and timing with harvesting personnel are planned and permits obtained to follow statutory road regulations and road conditions 1.6. Communication with others is established and maintained in line with OHS requirements |
2. Load and unload truck | 2.1. Access is identified and manoeuvring approach planned for loading and unloading sites 2.2. Condition of roads and tracks are monitored and unexpected ground, water, vegetation or other environmental conditions are reported to appropriate personnel 2.3. Truck and trailer are positioned to maintain load safety and security while loading occurs 2.4. Logs are assessed for weight, diameter, length and grade 2.5. Log positioning equipment is placed and checked or reset for planned loading 2.6. Log loading is undertaken to ensure load build meets specifications, follows sequence and locations to minimise handling, stabilises the load and meets transport requirements 2.7. Logs are secured with sufficient securing devices to satisfy safety, job and regulatory requirements 2.8. Load is inspected after transport for log movement and logs only supported by binders or chains 2.9. Safe unloading sequence is assessed and provisions are made to support logs that cannot be controlled when released 2.10. Binders and chains are released in correct sequence for truck, trailer and load configuration |
3. Transport logs | 3.1. Load is checked and trimmed to ensure safe transport with overhang warning devices fitted to follow road regulations 3.2. Engine is started with instruments and gauges monitored to ensure equipment operation is safe, in line with manufacturer specifications and safety rules 3.3. Truck is operated and driven to manufacturer specifications and legislative requirements using primary and subsidiary controls as appropriate to conditions 3.4. Logs are transported following planned or modified route with consideration for road surfaces and conditions 3.5. Periodic load safety checks are conducted and load is re-tensioned in line with statutory requirements and road conditions 3.6. Truck is monitored using gauges, warning devices and observation of performance to detect operating faults 3.7. Log shifting process and truck operations, including faults, are recorded and reported 3.8. Truck is parked to avoid site and equipment hazards, engine is shutdown and truck is secured in line with manufacturer specifications |
Required Skills
This describes the essential skills and knowledge and their level required for this unit. |
Required skills |
Technical skills sufficient to use and maintain relevant tools, machinery and equipment; efficiently and safely shift forestry logs using trucks Communication skills sufficient to use appropriate communication and interpersonal techniques with colleagues and others Literacy skills sufficient to record and report workplace information; maintain documentation Numeracy skills sufficient to measure, estimate and calculate time required to complete a task Problem solving skills sufficient to identify problems and equipment faults; demonstrate appropriate response procedures |
Required knowledge |
Applicable commonwealth, state or territory legislation, regulations, standards, codes of practice and established safe practices relevant to the full range of processes for shifting forestry logs using trucks Environmental protection requirements, including the safe disposal of waste material, and the minimisation of carbon emissions Organisational and site standards, requirements, policies and procedures for shifting forestry logs using trucks Environmental risks and hazards Using energy effectively and efficiently Applicable fall from heights regulations and compliance requirements Log shifting equipment and techniques Scheduling and routing procedures Truck and equipment capabilities and capacities Statutory road regulations Log loading and unloading methods Established communication channels and protocols Problem identification and resolution strategies, and common fault finding techniques Types of tools and equipment, and procedures for their safe use and maintenance Appropriate mathematical procedures for estimating and measuring, including calculating time to complete tasks Procedures for recording and reporting workplace information |
Evidence Required
The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package. | |
Overview of assessment | A person who demonstrates competency in this unit must be able to provide evidence that they can safely and efficiently shift forestry logs using trucks in line with organisational requirements |
Critical aspects for assessment and evidence required to demonstrate competency in this unit | The evidence required to demonstrate competency in this unit must be relevant to, and satisfy, all of the requirements of the elements of this unit and include demonstration of: following applicable commonwealth, state or territory legislative and regulatory requirements and codes of practice relevant to shifting forestry logs using trucks following organisational policies and procedures relevant to shifting forestry logs using trucks shifting forestry logs using trucks for production and output activities in line with enterprise requirements coordinating personnel to follow procedures for shifting forestry logs using trucks |
Context of and specific resources for assessment | Competency is to be assessed in the workplace or realistically simulated workplace Assessment is to occur under standard and authorised work practices, safety requirements and environmental constraints Assessment of required knowledge, other than confirmatory questions, will usually be conducted in an off-site context Assessment is to follow relevant regulatory or Australian Standards requirements The following resources should be made available: workplace location or simulated workplace materials and equipment relevant to undertaking work applicable to this unit specifications and work instructions |
Method of assessment | Assessment must satisfy the endorsed Assessment Guidelines of the FPI11 Training Package Assessment methods must confirm consistency and accuracy of performance (over time and in a range of workplace relevant contexts) together with application of required knowledge Assessment must be by direct observation of tasks, with questioning on required knowledge and it must also reinforce the integration of employability skills Assessment methods must confirm the ability to access and correctly interpret and apply the required knowledge Assessment may be applied under project-related conditions (real or simulated) and require evidence of process Assessment must confirm a reasonable inference that competency is able not only to be satisfied under the particular circumstance, but is able to be transferred to other circumstances Assessment may be in conjunction with assessment of other units of competency The assessment environment should not disadvantage the candidate Assessment practices should take into account any relevant language or cultural issues related to Aboriginality, gender or language backgrounds other than English Where the participant has a disability, reasonable adjustment may be applied during assessment Language and literacy demands of the assessment task should not be higher than those of the work role |
Range Statement
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included. | |
OHS requirements: | are to be in line with applicable commonwealth, state or territory legislation and regulations, and organisational safety policies and procedures, and may include: personal protective equipment and clothing safety equipment first aid equipment fire fighting equipment hazard and risk control fatigue management elimination of hazardous materials and substances safe forest practices, including required actions relating to forest fire manual handling including shifting, lifting and carrying |
Environmental requirements may include: | legislation organisational policies and procedures workplace practices |
Legislative requirements: | are to be in line with applicable commonwealth, state or territory legislation, regulations, certification requirements and codes of practice and may include: award and enterprise agreements industrial relations Australian Standards confidentiality and privacy OHS the environment equal opportunity anti-discrimination relevant industry codes of practice duty of care |
Organisational requirements may include: | legal organisational and site guidelines policies and procedures relating to own role and responsibility quality assurance procedural manuals quality and continuous improvement processes and standards OHS, emergency and evacuation procedures ethical standards recording and reporting requirements equipment use, maintenance and storage requirements environmental management requirements (waste minimisation and disposal, recycling and re-use guidelines) |
Work order is to include: | instructions for equipment allocation and usage location intended activity to designated personnel and may also include: instructions for the environmental monitoring of work and procedures environmental care requirements relevant to the work |
Appropriate personnel may include: | supervisors suppliers clients colleagues managers |
Truck may include: | rigid or articulated timber trucks, including: semi-trailers jinkers quad-dogs B doubles two-bay skeletal trucks |
Ancillary equipment may include: | safety fittings headache boards cab guards |
Accessories may include: | tools records first aid kits fire extinguishers binders chains personal protective equipment |
Configuration is to include: | truck and trailer combination |
Logs are to include: | assessment of: diameter range curvature faults length |
Communication may include: | verbal and non-verbal language constructive feedback active listening questioning to clarify and confirm understanding use of positive, confident and cooperative language use of language and concepts appropriate to individual social and cultural differences control of tone of voice |
Environmental conditions may include: | ground growth canopy general forest lean fallen trees ground slope soil and water protection ground hazards and obstacles |
Log positioning equipment may include: | bolsters slippers stanchions chocks |
Load build is to include: | positioning of logs on truck so as to avoid: uneven weight distribution instability or uncontrolled collapse of the load during loading or unloading overhang requirements for trailer rigidity turning clearance projection above stanchions crowning weight distribution on truck and trailer axles contact with bolsters, stanchions and other logs |
Securing devices are to include: | chains binders other tensioning devices |
Trimming | is the process of preparing the truck and load for safe transport |
Primary controls may include: | power brakes steering speed position load reaction gear selection |
Subsidiary controls may include: | differential lock centre tyre inflation (CTI) power dividers |
Re-tensioning is to include: | re-tightening of the chains, binders and other tensioning devices |
Records and reports may include: | scheduling and coordination outcomes log movement despatch outcomes storage locations quality outcomes hazards incidents equipment malfunctions and may be: manual a computer-based system other appropriate organisational communication system |
Sectors
Not Applicable
Competency Field
Common Technical |
Employability Skills
This unit contains employability skills |
Licensing Information
Refer to Unit Descriptor