Application
This unit applies to operators who identify and rectify workplace problems in the pulp and paper industry. This work typically involves complex integrated equipment and continuous operations This unit generally applies to those who: identify and describe the problem and its effects analyse the problem and determine priority of causes apply possible solutions, and document and report problems and solutions to meet safety, quality and productivity requirements It does not include solving systemic problems in the workplace |
Prerequisites
Not Applicable
Elements and Performance Criteria
ELEMENT | PERFORMANCE CRITERIA |
1. Identify and describe the problem and its effects | 1.1. Problem and its effects is identified and described within Occupational Health and Safety (OHS) regulations, environmental and safe working requirements/practices, Standard Operating Procedures (SOP), and housekeeping requirements |
1.2. Problem is clearly described | |
1.3. Effect of the problem on personal safety, equipment safety, quality and productivity is identified | |
1.4. Mill procedures are instituted where personal safety is identified | |
2. Analyse the problem and determine priority of causes | 2.1. Problem is analysed and priority of causes is determined within OHS regulations, environmental and safe working requirements/practices, SOP, and housekeeping requirements |
2.2. Possible causes are identified | |
2.3. Impact of the problem on machinery performance is determined | |
2.4. Likelihood of each possible cause occurring is considered | |
2.5. Ability to do a quick check on each cause is determined | |
2.6. Possible causes for investigation are prioritised | |
2.7. Analysis and determination of possible causes is completed in a timely manner | |
3. Apply possible solutions | 3.1. Possible solutions are applied within OHS regulations, environmental and safe working requirements/practices, SOP, and housekeeping requirements |
3.2. Quick checks are conducted if possible | |
3.3. Possible solutions are applied | |
3.4. Outcome is reviewed | |
3.5. Next possible solution is actioned in prioritised order | |
4. Document and report problems and solutions | 4.1. Completion of documentation and reporting within OHS regulations, environmental and safe working requirements/practices, SOP, and housekeeping requirements |
4.2. Problem and the solution is documented as required | |
4.3. Problem and solution is reported to relevant personal as required |
Required Skills
This describes the skills and knowledge required for this unit. |
Required skills |
Identifies, accesses and interprets relevant historical and operational data and information Uses required forms of communication in identifying and rectifying problems in the workplace Reads and interprets required documentation, procedures and reports Accesses, navigates and enters computer-based information Identifies and actions systems, quality and equipment faults within level of responsibility Identifies causes and effects of faults and corrective action on associated processes Takes timely corrective action to maximise safety, quality and productivity Undertakes necessary calculations to aid troubleshooting, as required Uses troubleshooting guides and diagnostic procedures Interprets instruments, gauges and data recording equipment Maintains situational awareness in the work area Takes samples, conducts tests and interprets results if required Analyses and uses sensory information to adjust process to maximise safety, quality and productivity Uses electronic and other control systems to control equipment and processes as required |
Required knowledge |
Procedures, regulations and legislative requirements relevant to pulp and paper operations including OHS, environmental including relevant sustainability requirements/practices, SOP, isolation procedures, safe working requirements, risks and hazard identification and housekeeping Relevant forms of communication Working knowledge of system, processes and associated services sufficient for problem solving within level of responsibility, and may include: plant layout theory of operation causes and effects of adjustments made to equipment and processes relationships between system, processes and associated services effects of process variables on production and quality Sampling and testing process for plant and system operations, and process monitoring - purpose, standards and procedures as per site agreements Plant operation and control mechanisms, within level of responsibility Sensory information that indicates a deviation from standard operating parameters, within level of responsibility Sufficient knowledge of electronic and other control systems, operation and application to make appropriate adjustments that control pulp and paper operations, within level of responsibility |
Evidence Required
The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package. | |
Overview of assessment | |
Critical aspects for assessment and evidence required to demonstrate competency in this unit | Evidence should be relevant to the work. It should satisfy the requirements of the elements and performance criteria and include consideration of: the required knowledge and skills tailored to the needs of the specific workplace applicable OHS regulations, environmental and safe working requirements/practices, SOP and housekeeping requirements applicable aspects of the range statement practical workplace demonstration of skills in identifying and rectifying problems in the workplace |
Context of and specific resources for assessment | A workplace assessment must be used to assess: the application of required knowledge on the job the application of skills on the job, over time and under a range of typical conditions that may be experienced in identifying and rectifying problems in the workplace Access to the full range of equipment involved in integrated continuous manufacturing in a pulp or paper mill is required |
Method of assessment | A combination of assessment methods should be used. The following examples are appropriate for this unit: observation of applied skills and knowledge on the job workplace demonstrations via a mock-up or simulation that replicate part/s of the job answers to written or verbal questions about specific skills and knowledge third-party reports from relevant and skilled personnel written evidence e.g. log sheet entries, checklist entries, test results Assessment processes and techniques must be culturally appropriate and in keeping with the language and literacy capacity of the learner and the work being performed. This includes conducting an assessment in a manner that allows thoughts to be conveyed verbally so that the learner can both understand and be understood by the assessor (e.g. use plain English and terminology used on the job) A holistic assessment with other units relevant to the pulp and paper industry, mill and job role is recommended Additional information on approaches to assessment for the pulp and paper industry is provided in the Assessment Guidelines for this Training Package |
Range Statement
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included. | |
Type and extent of the problem may include: | quality or equipment problem position/location of defect or problem continuous or intermittent deterioration how long it has been occurring when/who first observed the problem paper quality |
Resources may include: | personnel equipment production process materials or supplies trouble shooting guides |
Machinery performance may include: | significant, moderate, minor or no equipment damage short or prolonged machine shut quality outside acceptable parameters quality compromises substantial, moderate or minor increases in waste significant, moderate or minor productivity losses |
Chances may include: | almost certain likely possible unlikely rare |
Operations may include: | coating systems handling and preparing primary resources steam generation electrical power generation handling and preparing waste paper for pulp production waste paper operations pulping operations chemical recovery operations finishing and converting stock preparation operations wet end operations dry end operations water services |
Equipment may include: | communication equipment and 2-way radios computer systems electronic screens and alarms process control systems analogue and digital instruments fully automated, semi-automated, manually operated plant and equipment appropriate to plant operations and systems |
Electronic control systems may include: | Digital Control Systems (DCS) touch screens robotics |
Legislation, regulatory, licensing and certification requirements may include: | OHS and environmental requirements (local, state and commonwealth) statutory requirements (local, state and commonwealth) operator licences and endorsements |
Documentation, procedures and reports may include: | SOP quality procedures environmental sustainability requirements/practices plant manufacturing operating manuals oil or chemical spills and disposal guidelines plant isolation documentation safe work documentation (e.g. plant clearance, job safety analysis, permit systems) Material Safety Data Sheets (MSDS) furnish sheets tally sheets process and instrument diagrams process improvement systems planning documents small group presentations minutes of meeting |
Actions may include: | process adjustments reporting to authorised person rectifying problem within level of responsibility |
Sampling and testing may include: | stock consistency stock colour stock brightness water quality waste paper quality visual assessments stickies |
Communications may include | interaction with: internal/external customers and suppliers team members maintenance services operational management |
Situational awareness may include | awareness of: traffic pedestrians location of equipment product hazards obstruction unexpected movement |
Forms of communications may include: | written e.g. log books, emails, incident and other reports, run sheets, data entry reading and interpreting documentation e.g. SOP, manuals, checklists, drawings verbal e.g. radio skills, telephone, face to face, handover non-verbal e.g. hand signals, alarms signage e.g. safety access |
Sensory information may include: | visual sound feel touch smell vibration temperature |
Sectors
Not Applicable
Employability Skills
This unit contains employability skills |
Licensing Information
Refer to Unit Descriptor