Application
This unit applies to operators who unload materials in the pulp and paper industry. This work typically involves complex integrated equipment and continuous operations This unit generally applies to those who: conduct unloading processes sort and store materials, and record or tally unloading operations data to meet safety, quality and productivity requirements It does not include receiving materials, preparing and operating the woodchip production system, distributing woodchips or troubleshooting and rectifying primary resource operations |
Prerequisites
Not Applicable
Elements and Performance Criteria
ELEMENT | PERFORMANCE CRITERIA |
1. Conduct unloading processes | 1.1. Unloading processes are conducted within Occupational Health and Safety (OHS) regulations, environmental and safe working requirements/practices, Standard Operating Procedures (SOP), and housekeeping requirements. 1.2. Load shifting equipment is checked, set up and prepared for operation 1.3. Load is inspected for movements and safest unloading sequence is determined 1.4. Materials are lifted and unloaded maintaining load and equipment stability 1.5. Damage to raw materials, equipment, or vehicle is reported according to company procedures 1.6. Load or vehicle lifting equipment performance is monitored for unsatisfactory or hazardous operation |
2. Sort and store materials | 2.1. Materials are sorted and stored within OHS regulations, environmental and safe working requirements/practices, SOP, and housekeeping requirements 2.2. Materials are identified and assessed for immediate use or storage 2.3. Materials are moved to appropriate storage locations consistent with type, quality and stock rotation requirements 2.4. Stacks are constructed to provide stability and minimise problems 2.5. Provision for decks, storage bays and access for lifting equipment is made when storing |
3. Record or tally unloading operations data | 3.1. Unloading operations data is recorded or tallied within OHS regulations, environmental and safe working requirements/practices, SOP, and housekeeping requirements 3.2. Materials are confirmed and recorded 3.3. Storage areas are marked as required 3.4. Tally sheets and/or reject stock documentation are maintained as required |
Required Skills
This describes the skills and knowledge required for this unit. |
Required skills |
Uses required forms of communication in unloading materials Reads and interprets required documentation, procedures and reports Collects, interprets and enters data and uses recording systems Maintains machinery documentation Accesses, navigates and enters computer-based information Identifies and actions problems within level of responsibility Monitors and controls process control points Maintains situational awareness in the work area Uses enterprise work practices Selects appropriate actions for handling non-conformance loads Minimises handling to meet loading, processing, and stock rotation requirements Moves and stacks materials Delivers materials as required to meet production requirements Uses identification, classification and tagging systems Uses measuring equipment as required Applies manual handling techniques Operates high risk (and non-high risk) load shifting equipment as required Operates materials handling equipment Analyses and uses sensory information to alter work sequence to maintain safety, quality and productivity Uses electronic and other control systems to control equipment and processes as required |
Required knowledge |
Procedures, regulations and legislative requirements relevant to unloading materials, including OHS, environmental including relevant sustainability requirements/practices, SOP, isolation procedures, safe working requirements, risks and hazard identification and housekeeping Dangerous goods handling and storing requirements Relevant forms of communication Basic problem-solving techniques consistent with level of responsibility Working knowledge of materials unloading processes, area layout and associated services including operating parameters, variation and associated adjustments within level of responsibility Load types, specifications and characteristics Unloading, sorting and storage requirements, procedures and implications Application of high risk (and non-high risk) load shifting equipment as required Sensory information that indicates a deviation from standard operating parameters Sufficient knowledge of electronic and other control systems, operation and application to make appropriate adjustments that control material unloading processes, within level of responsibility |
Evidence Required
The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package. | |
Overview of assessment | |
Critical aspects for assessment and evidence required to demonstrate competency in this unit | Evidence should be relevant to the work. It should satisfy the requirements of the elements and performance criteria and include consideration of: the required knowledge and skills tailored to the needs of the specific workplace applicable OHS regulations, environmental and safe working requirements/practices, SOP and housekeeping requirements applicable aspects of the range statement practical workplace demonstration of skills in unloading materials |
Context of and specific resources for assessment | A workplace assessment must be used to assess: the application of required knowledge on the job the application of skills on the job, over time and under a range of typical conditions that may be experienced in unloading materials Access to the full range of equipment involved in unloading materials in a pulp or paper mill is required |
Method of assessment | A combination of assessment methods should be used. The following examples are appropriate for this unit: observation of applied skills and knowledge on the job workplace demonstrations via a mock-up or simulation that replicate part/s of the job answers to written or verbal questions about specific skills and knowledge third-party reports from relevant and skilled personnel written evidence e.g. log sheet entries, checklist entries, test results Assessment processes and techniques must be culturally appropriate and in keeping with the language and literacy capacity of the learner and the work being performed. This includes conducting an assessment in a manner that allows thoughts to be conveyed verbally so that the learner can both understand and be understood by the assessor (e.g. use plain English and terminology used on the job) A holistic assessment with other units relevant to the pulp and paper industry, mill and job role is recommended Additional information on approaches to assessment for the pulp and paper industry is provided in the Assessment Guidelines for this Training Package |
Range Statement
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included. | ||
Productivity requirements may include: | energy efficiency waste minimisation evaporation minimisation, including landfill and waste water reduction environmentally safe waste disposal consideration of resource utilisation, including fibre efficiency minimising delays chemical recovery maximisation meeting key performance indicators line speed handovers quality checks meeting output targets i.e. net tonnes per employee per annum machine/process time availability i.e. time the machine or process is making product machine/process production rate | |
Materials and supplies may include: | hardwood or softwood logs lapped pulp baled pulp waste paper woodchips finished supplies parts complete orders | |
Equipment may include: | fork lift crane front end loader mobile crane dozer fork lift attachments crane hooks chains slings and straps grabs winches computer system video monitoring electronic weighing and measuring equipment electronic screens and alarms process control systems analogue and digital instrumentation fully automated, semi-automated, manually operated plant and equipment appropriate to unloading materials | |
Electronic control systems may include: | Digital Control System (DCS) touch screens robotics | |
Legislation, regulatory, licensing and certification requirements may include: | OHS and environmental requirements (local, state and commonwealth) activity or task specific high risk and (non-high risk) load shifting licensing requirements dangerous goods storage and handling | |
Documentation, procedures and reports may include: | SOP quality procedures environmental sustainability requirements/practices plant manufacturing operating manuals oil or chemical spills and disposal guidelines plant isolation documentation safe work documentation e.g. plant clearance, job safety analysis, permit systems enterprise policy, procedures and guidelines weighbridge dockets work orders tally sheets truck delivery dockets invoices non-conformance reports test results and reports log sheets (production/equipment) equipment performance data tonnage, input and conversion Material Safety Data Sheets (MSDS) pile survey documents | |
Maintenance may include: | operator level maintenance as per site agreement operator maintenance schedules maintenance systems maintenance suppliers proactive maintenance strategies e.g. Total Productive Maintenance (TPM), Reliability Centred Maintenance (RCM) | |
Actions may include: | process adjustments reporting to authorised person rectifying problem within level of responsibility | |
Communications may include | interaction with: internal/external customers and suppliers work area personnel maintenance services team members production/service co-ordinator operational management statutory authorities | |
Situational awareness may include | awareness of: traffic pedestrians location of equipment product hazards obstruction unexpected movement | |
Sensory information may include: | visual sound feel touch smell vibration temperature | |
Forms of communication may include: | written e.g. log books, emails, incident and other reports, run sheets, data entry reading and interpreting documentation e.g. SOP, manuals, checklists, drawings verbal e.g. radio skills, telephone, face to face, handover non-verbal e.g. hand signals, alarms, observations signage e.g. safety, access |
Sectors
Not Applicable
Employability Skills
This unit contains employability skills |
Licensing Information
Refer to Unit Descriptor