Application
This unit applies to operators who store product in the pulp and paper industry. This work typically involves complex integrated equipment and continuous operations This unit generally applies to those who: prepare to store product, and store product to meet safety, quality and productivity requirements It does not include dispatching or packaging product |
Prerequisites
Not Applicable
Elements and Performance Criteria
ELEMENT | PERFORMANCE CRITERIA |
1. Prepare to store product | 1.1. Product is prepared for storage within Occupational Health and Safety (OHS) regulations, environmental and safe working requirements/practices, Standard Operating Procedures (SOP), and housekeeping requirements 1.2. Load or product documentation is received, interpreted and verified 1.3. Load and handling characteristics are identified 1.4. Appropriate mechanical handling equipment is selected 1.5. Pre-start check is conducted on mechanical handling equipment |
2. Store product | 2.1. Product is stored within OHS regulations, environmental and safe working requirements/practices, SOP, and housekeeping requirements 2.2. Mechanical handling equipment is used to lift, carry and set down load 2.3. Load is stored at the specified location in compliance with other storage requirements 2.4. Product quality faults are identified by observation 2.5. Non-conforming product is actioned 2.6. Situational awareness is maintained in storage areas 2.7. Housekeeping is completed 2.8. Inventory records documentation is completed |
Required Skills
This describes the skills and knowledge required for this unit. |
Required skills |
Uses required forms of communication in storing product Reads and interprets required documentation, procedures and reports Accesses and navigates and enters computer based information required for storing of product including: maintaining inventory systems recording non-conforming product entering customer orders Interprets instruments, gauges and data recording equipment Communicates effectively with individuals and teams Identifies and actions problems within level of responsibility Identifies and rectifies product storage problems or faults Identifies causes and effects of equipment or system faults and takes corrective action Identifies and monitors storage areas Dispatches product to warehouse Implements isolation and lockout procedures for equipment within loading and unloading bays Maintains situational awareness in the work area Operates required materials handling equipment Maintains required materials handling equipment Operates high risk equipment as required Analyses and uses sensory information to maintain safety, quality and productivity Uses electronic and other control systems when storing product as required |
Required knowledge |
Procedures, regulations and legislative requirements relevant to storing product including OHS, environmental including relevant sustainability requirements/practices, SOP, isolation procedures, safe working requirements, risks and hazard identification and housekeeping Relevant forms of communication Basic problem-solving techniques consistent with level of responsibility Causes and effects of equipment or system faults and required corrective action Working knowledge of product storage processes, layout and associated services including operating parameters, variation and associated adjustments within level of responsibility Warehouse organisation and workflow Warehousing procedures Purposes for stock rotation of stored products Inventory systems Application of high risk equipment as required Sensory information that indicates a deviation from standard operating parameters Sufficient knowledge of electronic and other control systems, operation and application to make appropriate adjustments that control storage of product |
Evidence Required
The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package. | |
Overview of assessment | |
Critical aspects for assessment and evidence required to demonstrate competency in this unit | Evidence should be relevant to the work. It should satisfy the requirements of the elements and performance criteria and include consideration of: the required knowledge and skills tailored to the needs of the specific workplace applicable OHS regulations, environmental and safe working requirements/practices, SOP and housekeeping requirements applicable aspects of the range statement practical workplace demonstration of skills in storing product |
Context of and specific resources for assessment | A workplace assessment must be used to assess: the application of required knowledge on the job the application of skills on the job, over time and under a range of typical conditions that may be experienced in storing product Access to the full range of equipment involved in product storage operations in a pulp or paper mill is required |
Method of assessment | A combination of assessment methods should be used. The following examples are appropriate for this unit: observation of applied skills and knowledge on the job workplace demonstrations via a mock-up or simulation that replicate part/s of the job answers to written or verbal questions about specific skills and knowledge third-party reports from relevant and skilled personnel written evidence e.g. log sheet entries, checklist entries, test results Assessment processes and techniques must be culturally appropriate and in keeping with the language and literacy capacity of the learner and the work being performed. This includes conducting an assessment in a manner that allows thoughts to be conveyed verbally so that the learner can both understand and be understood by the assessor (e.g. use plain English and terminology used on the job) A holistic assessment with other units relevant to the pulp and paper industry, mill and job role is recommended Additional information on approaches to assessment for the pulp and paper industry is provided in the Assessment Guidelines for this Training Package |
Range Statement
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included. | |
Plant, systems and equipment may include | materials handling equipment including: fork-lift and attachments pallet truck gantry crane poly-wrapper labelling system RF (radio frequency) guns or barcode scanners sweeper transport equipment including trucks and trailers ramps and dock levellers wrapping and packing guillotine, knives and cutting equipment conveying systems processes equipment (manual, motorised) overhead cranes scales roll grab attachments robots palletising plant warehousing control systems electronic, pneumatic and hydraulic process controls computer systems electronic screens and alarms |
Materials and supplies may include: | slip sheets plywood container boxes (shippers) security seals shrink and stretch wraps pallets sheet paper signs and labels rolls compressed air |
Product may include: | unitised pallets customer rolls and reels cartons polybundles |
Electronic control systems may include: | Digital Control System (DCS) touch screens robotics |
Legislation, regulatory, licensing and certification requirements may include: | OHS and environmental requirements (local, state and commonwealth) activity or task specific high risk licensing requirements freight transport legislation including load limits and restraint, driver fatigue and train of responsibility |
Documentation, procedures and reports may include: | production and packaging schedules quality procedures and quality assurance documentation including ISO 9002 environmental sustainability requirements/practices plant manufacturing operating manuals oil or chemical spills and disposal guidelines plant isolation documentation safe work documentation e.g. plant clearance, job safety analysis, permit systems work orders SOP customer orders Material Safety Data Sheets (MSDS) |
Maintenance may include: | operator level maintenance as per site agreement operator maintenance schedules maintenance supplies maintenance systems maintenance suppliers pro-active maintenance strategies e.g. Total Productive Maintenance (TPM), Reliability Centred Maintenance (RCM) |
Quality assessments as per site requirements may include: | date coding damaged packaging sheet size roll appearance print quality roll size product identification warehousing records |
Actions may include: | process adjustments reporting to authorised person rectifying problem within level of responsibility |
Communications may include | interaction with: product storage co-ordinator senior operators drivers internal/external customers and suppliers maintenance services team members production/services co-ordinator operational management statutory authorities |
Situational awareness may include | awareness of: traffic pedestrians location of equipment product hazards obstructions unexpected movement |
Sensory information may include: | visual sound feel touch smell vibration temperature |
Forms of communications may include: | written e.g. log books, emails, incident and other reports, run sheets, data entry reading and interpreting documentation e.g. SOP, manuals, checklists, drawings verbal e.g. radio skills, telephone, face to face, handover non-verbal e.g. hand signals, alarms, observations signage e.g. safety, access |
Sectors
Not Applicable
Employability Skills
This unit contains employability skills |
Licensing Information
Refer to Unit Descriptor