Application
This unit of competency describes the outcomes required to mechanically stress grade panels with mechanical stress graders and high speed mechanical graders to test panels for strength and durability against set grades.
The unit applies to those who mechanically stress grade timber in a forest products factory setting and includes operator maintenance.
No licensing, legislative, regulatory, or certification requirements apply to this unit at the time of publication.
Elements and Performance Criteria
Elements describe the essential outcomes. | Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold italicised text is used, further information is detailed in the range of conditions. |
1. Prepare for stress-grading | 1.1 Review work order and where required check with appropriate personnel. 1.2 Select appropriate personal protective equipment and check for operational effectiveness. 1.3 Obtain type and quantity of panels for stress grading from storage location. 1.4 Plan stress-grading process in line with work order. |
2. Set up equipment | 2.1 Use equipment in line with organisational safety procedures, manufacturer’s instructions and environmental protection practices. 2.2 Complete pre start-up checks on equipment to ensure operational effectiveness. 2.3 Set up spray guns or branding rolls for use in line with work order. 2.4 Complete calibration process using verification panels and set grade thresholds in line with organisational procedures. |
3. Stress grade panels | 3.1 Complete automatic grading process, monitor and adjust material flow to machine. 3.2 Monitor machinery to ensure consistent grade marking and panel appearance in line with industry standards. 3.3 Withdraw samples for independent testing and prepare according to testing procedures. |
4. Conduct operator maintenance | 4.1 Follow organisational safety procedures to lock out equipment. 4.2 Check and clean photo-electric cells and reflectors in line with environmental protection practices. 4.3 Check and refill spray guns or branding rolls. 4.4 Adjust and maintain mechanical stress grade rollers, auto-feed and load pressure in line with manufacturer’s recommendations. 4.5 Keep stress-grading area clear of dust and debris in line with organisational safety procedures. 4.6 Record and report production outcomes, equipment faults and maintenance requirements to appropriate personnel. |
Evidence of Performance
A person demonstrating competency in this unit must satisfy all of the elements, performance criteria and foundation skills of this unit.
operate a mechanical stress grading machine, in line with work orders, to grade the following types of panels:
laminated veneer
medium density fibreboard
chipboard
fibreboard
plywood
complete operator maintenance on the mechanical stress grading equipment.
Evidence of Knowledge
A person competent in this unit must be able to demonstrate knowledge of:
typical flow of material supply in and out of the grading area
typical work flow processes and techniques used to mechanically stress grade panels
range of industry standard strength grades and thresholds and applicable terminology
markings used on panels to identify grades
reason for independent testing of panels and processes for sampling and preparing panels for testing
purpose, features and operation of equipment used to mechanically stress grade panels:
mechanical stress-graders or high speed mechanical graders
spray guns
branding rolls
verification panels
methods used to:
calibrate equipment to grades using verification panels
clean and maintain mechanical stress grading equipment
organisational procedures specific to mechanically stress grading panels:
workplace health and safety with particular emphasis on equipment lock out, use of personal protective equipment and handling hazardous substances
communication reporting lines
recording and reporting production outcomes, equipment faults and maintenance requirements
environmental protection practices for forest products factory settings:
reducing water and energy use
cleaning plant, tools and equipment
disposing of hazardous substances.
Assessment Conditions
The following resources must be made available:
mechanical stress-graders or high speed mechanical graders
spray guns
branding rolls
maintenance tools and equipment for mechanical stress graders
verification panels
consumable dye
personal protective equipment suitable for mechanically stress grading panels
a diverse range of commercial panels:
laminated veneer
medium density fibreboard
chipboard
fibreboard
plywood
manufacturers’ instructions for use and maintenance of equipment
work order with specific instructions for types and quantities of panels to be graded
template documents for recording production outcomes, equipment faults and maintenance requirements
organisational procedures for mechanically stress grading panels.
Competency is to be assessed in the workplace or a simulated environment that accurately reflects performance in a real workplace setting.
Assessor requirements
Assessors must:
hold the appropriate assessor competency standards as outlined in regulations; and
be able to demonstrate vocational competencies at least to the level being assessed; and
be able to demonstrate how they are continuing to develop their VET knowledge and skills as well as maintaining their industry currency and assessor competence.
Foundation Skills
This section describes those core and employment skills that are essential to performance and are not explicit in the performance criteria. | |
Numeracy skills to: | identify quantities of panels required within work orders and count numbers of panels to be graded calibrate mechanical stress grading equipment to specified grade thresholds. |
Oral communication skills to: | ask questions and actively listen to clarify contents of work orders where necessary. |
Reading skills to: | interpret: workplace health and safety and other organisational procedures work orders manufacturers’ instructions and maintenance recommendations. |
Writing skills to: | complete accurate basic records for production outcomes, equipment faults and maintenance requirements. |
Planning and organising skills to: | logically sequence the stages of preparation and stress grading work using work order to guide activities. |
Range Statement
Not Applicable
Sectors
Sawmilling and Processing
Timber Manufactured Products
Wood Panel Products