Elements

Performance Criteria

Elements describe the essential outcomes.

Performance criteria describe the performance needed to demonstrate achievement of the element.

1. Plan and prepare to operate a loader

1.1 Review production plan, confirm its targets for felling and processing and assess wood flow requirements to ensure efficient machine operation and overall productivity

1.2 Confirm type, size and quantity of logs or slash to be clamped to ensure that loads and machine are in line with safe working requirements and industry standards for operations

1.3 Confirm, identify and report health, safety, environmental and heritage risks of operation in line with standard operating procedures and site safety and environmental management plans

1.4 Apply risk control measures in line with standard operating procedures, site operational plan, legislative requirements and industry standards to eliminate or minimise risks

1.5 Identify emergency plan procedures to follow in the event of an emergency

1.6 Use production plan to identify layout of landing or roadside area and access to logs for efficient process and minimum interference with other forestry operations

1.7 Assess terrain characteristics to establish machine stability

1.8 Carry out pre-operational checks on machine in line with workplace procedures or manufacturers' recommendations to ensure optimal production performance and operational effectiveness

2. Operate loader to load log trucks and/or sort log stacks

2.1 Use industry-accepted warning signs, vehicle-to-vehicle communication systems and procedures to maintain communication and workplace safety during operation

2.2 Position loader for stability and safe access to logs/slash, by adjusting the technique in response to terrain conditions

2.3 Use machine cabin controls to clamp bunches of logs/slash, and load trucks and/or sort stacks, while ensuring that the bunch size is suited to the log clamp capacity and terrain conditions

2.4 Systematically load trucks and/or construct log/slash stacks by using handling techniques to avoid log damage in line with the production plan requirements and ensure safety and stability of truck and/or stacks

2.5 Use appropriate techniques to maintain log product separation in the truck when multiple product grades are loaded or in line with the production plan requirements

2.6 Drive the machine and manoeuvre log clamp safely and efficiently to avoid logs, machine and environment damage in line with the production plan requirements

2.7 Ensure all merchantable product and/or slash from the site is loaded or sorted in line with the production plan requirements

3. Segregate and stack stems and/or logs

3.1 Visually assess and measure products for size, species and quality characteristics at the felling site and during staking at the roadside or landing bay, to ensure they are placed in the appropriate stack and in line with the production plan requirements

3.2 Mark and report logs that cannot be clearly and safely assessed in line with the production plan requirements

3.3 Position and construct stacks of stems or logs to avoid product damage, provide stability, restrict height for efficient extraction and facilitate safe access and conduct of other landing and machine operations in line with worksite layout and production plan requirements

3.4 Maintain stack separation and identification to ensure products are correctly presented on roadside and/or landing bay for an optimum transport and logistics cycle time in line with industry standards and production plan requirements

3.5 Clean area of all debris resulting from loader operation in line with resource management policies

4. Carry out machine operator maintenance

4.1 Park, shut-down, de-energise and isolate loader in line with workplace procedures or manufacturers' recommendations

4.2 Clean, check and carry out routine maintenance tasks on loader to maintain optimum operational performance

4.3 Identify and report machine faults, malfunctions or problems in line with workplace procedures or manufacturers' recommendations

4.4 Clean work area and dispose of or recycle waste materials in line with site environmental management plan

4.5 Record loader operations and maintenance activities

Skill

Description

Reading

read production plans, site safety and environmental management plans in a forest harvesting environment

read standard operating procedures and/or manufacturers' instructions for the operation of forest harvesting machinery

Writing

record operation, production and machine maintenance on paper based or electronic media

Oral Communication

interact verbally and non-verbally using agreed systems and processes to communicate with others on site to ensure safe and effective machine operations

use appropriate vocabulary, including technical language directly relevant to role

Numeracy

interpret gauges relevant to safe operation of harvesting machinery

determine construction of stable log stack

estimate the weight of logs to determine loading requirements and compliance to machine specifications

Navigate the world of work

understand main tasks, responsibilities and boundaries of own role

Interact with others

use modes of communication suitable to purpose to confirm and clarify understanding

communicate and report operational and safety information to on-site personnel

Get the work done

recognise and respond to routine problems

plan and organise own work activities and resources