ICAPRG517A
Install, test and evaluate pilot version of IT system

This unit describes the performance outcomes, skills and knowledge required to install a pilot version of a developed IT system, test it and evaluate it among a subset of clients to gauge reaction and gather feedback.

Application

This unit applies to senior staff in a development area who are required to test a new system among a small group of users, analysing their responses and comments.


Prerequisites

Not applicable.


Elements and Performance Criteria

1. Prepare for pilot system

1.1 Establish and confirm objectives, success criteria and acceptance criteria for pilot implementation

1.2 Identify and secure technical and organisational resources required for pilot implementation

1.3 Establish and confirm executive support for pilot

1.4 Complete project plan for pilot and refer project documentation to appropriate person for approval

2. Install pilot system

2.1 Install and configure pilot according to project plan

2.2 Verify and record technical readiness of pilot

2.3 Take necessary actions to determine accuracy of data

2.4 Prepare a status report and submit to appropriate person for sign-off

3. Test pilot system

3.1 Work with stakeholders to identify and release appropriate pilot group

3.2 Brief members of pilot team on objectives of test

3.3 Train pilot-team members in new system

3.4 Run test

4. Evaluate results and feedback of pilot

4.1 Assess computerised results of pilot test

4.2 Interview pilot group members to obtain feedback

4.3 Document feedback and results

4.4 Evaluate according to success and acceptance criteria previously established

4.5 Report final recommendations from pilot with regard to a complete installation of the piloted system to appropriate person

Required Skills

Required skills

analytical skills to analyse results of pilot

communication skills to:

facilitate training and user participants, including exposure to joint application development (JAD) process

liaise with clients

literacy skills to prepare status reports and final recommendation

planning and organisational skills to manage scope, time, cost, quality, communications and risk management

problem-solving skills to participate in the development of strategic initiatives

technical skills to install pilot system.

Required knowledge

role of stakeholders and the degree of stakeholder involvement in the developed system

system's current functionality

three or more current industry information-gathering methodologies

client business domain with regard to the developed system

current industry system development and design methodologies

current industry-accepted hardware and software products, with broad knowledge of general features and capabilities and detailed knowledge of installing pilot systems

current industry-accepted system piloting methodologies, including general features and capabilities

overall project objectives and client requirements when preparing for pilot

quality assurance practices with regard to installing, testing and evaluating developed system.

Evidence Required

The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.

Overview of assessment

Critical aspects for assessment and evidence required to demonstrate competency in this unit

Evidence of the ability to:

plan the pilot of a new system

define objectives, success criteria and acceptance criteria

run the piloting of a new system

obtain feedback from pilot group members

evaluate the pilot

make recommendations about the full installation.

Context of and specific resources for assessment

Assessment must ensure access to:

pilot system

acceptance criteria

people to be involved in the pilot

pilot plan

project plan

technical materials

appropriate learning and assessment support when required

modified equipment for people with special needs.

Method of assessment

A range of assessment methods should be used to assess practical skills and knowledge. The following examples are appropriate for this unit:

evaluation of pilot project documentation prepared by candidate

review of candidate’s documented recommendation

verbal or written questioning to assess candidate’s knowledge of acceptance testing

direct observation of candidate:

briefing pilot members on the piloted system

obtaining feedback from pilot members after the test.

Guidance information for assessment

Holistic assessment with other units relevant to the industry sector, workplace and job role is recommended, where appropriate.

Assessment processes and techniques must be culturally appropriate, and suitable to the communication skill level, language, literacy and numeracy capacity of the candidate and the work being performed.

Indigenous people and other people from a non-English speaking background may need additional support.

In cases where practical assessment is used it should be combined with targeted questioning to assess required knowledge.


Range Statement

The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.

Acceptance criteria may include:

cost implications

logistical considerations

technical

timeframe.

Organisational resources will vary subject to nature of pilot and may include:

financial resources secured to fund the pilot

staffing resources expected from user community, technical operations, technical support, technical development, supplier, project manager and executive sponsor

personnel with an understanding of corporate governance, such as legal, audit and data security specialists

representative experts from business areas, such as functional managers or operational staff

representative users

systems developers and IT technicians.

Project plan may include a number of variables, including:

parties and their responsibilities

project budget

project objectives

project scope

schedule.

Appropriate person may include:

authorised business representative

client

supervisor.


Sectors

Programming and software development


Employability Skills

This unit contains employability skills.


Licensing Information

No licensing, legislative, regulatory or certification requirements apply to this unit at the time of endorsement but users should confirm requirements with the relevant federal, state or territory authority.