Application
This unit describes the skills and knowledge required to produce basic rotary cut product, monitor and adjust machinery, maintain transportation of the substrate, identify and rectify faults, and correctly clean and shut down equipment.
No licensing, legislative or certification requirements apply to this unit at the time of publication.
Elements and Performance Criteria
ELEMENT | PERFORMANCE CRITERIA |
Elements describe the essential outcomes. | Performance criteria describe the performance needed to demonstrate achievement of the element. |
1. Maintain delivery systems | 1.1 Delivery systems are monitored and adjusted to ensure efficient and continuous operation and ensure no damage to finished product 1.2 Substrate is added to and removed from machine according to job specifications |
2. Maintain basic rotary cutting process | 2.1 Cutting edges and knife condition are monitored and adjusted to ensure product quality meets the approved sample standard 2.2 Cutting pressures are monitored and adjusted to ensure product quality meets the approved sample standard 2.3 Registration of cutting devices and knife(s) are monitored and adjusted to ensure product quality meets the approved sample standard 2.4 Packing of cutting devices is monitored and adjusted to ensure product quality meets the approved sample standard |
3. Maintain production process | 3.1 Basic in-line printing/converting/binding/finishing process(es) are monitored and adjusted to ensure product quality meets the approved sample standard 3.2 Production process is operated in association with fellow workers and according to enterprise procedures and planned daily schedule 3.3 Production is maintained according to work health and safety (WHS) requirements, manufacturer’s specifications and enterprise procedures 3.4 Manual and/or automatic control is used according to job specifications 3.5 Performance is monitored and verified using the process control system according to enterprise procedures 3.6 Production difficulties are anticipated and preventive action is taken to prevent occurrence by timely intervention 3.7 Process adjustments to eliminate problems are reported according to enterprise procedures 3.8 Faulty performance of equipment is identified and reported according to enterprise procedures 3.9 Waste is sorted according to enterprise procedures |
4. Identify and rectify problems and faults | 4.1 Problem in rotary cutting machine operation is identified and reported according to enterprise procedures 4.2 Adjustments or corrections are carried out according to specified procedures and are consistent with operator’s skill level 4.3 Rotary cutting machine operation is checked to ensure correct operation 4.4 Machine faults requiring repair are identified and reported to designated person according to enterprise procedures 4.5 Repair/adjustment is verified prior to resumption of operations |
5. Conduct shutdown of production process | 5.1 Correct shutdown sequence is followed according to manufacturer’s specifications and enterprise procedures 5.2 Shutdown is conducted in association with fellow workers and in compliance with WHS requirements 5.3 Substrate waste is removed from operating area and recycled or disposed of, where required, according to regulatory requirements and enterprise procedures |
6. Clean rotary cutting machine at end of run | 6.1 Cutting devices and knife/knives are cleaned or replaced ready for next run 6.2 Cutting devices are sharpened 6.3 Machine bed is cleaned ready for next run 6.4 Cutting units are disengaged and cleaned ready for next run 6.5 In-line printing/converting/binding/finishing units are cleaned ready for next run 6.6 Transportation and delivery systems are disengaged and cleaned ready for next run 6.7 Production records or other documentation are accurately completed where required by enterprise procedures |
Evidence of Performance
Evidence of the ability to:
demonstrate all safety devices on the machinery
demonstrate any THREE cutting processes, and for each process:
produce rotary cut products for TWO jobs, with different types and sizes of substrate and design of finished patterns, according to manufacturer’s and job specifications, enterprise procedures and listed performance criteria.
Note: If a specific volume or frequency is not stated, then evidence must be provided at least once.
Evidence of Knowledge
To complete the unit requirements safely and effectively, the individual must:
identify work health and safety factors for:
setting up and/or operating machine transport systems
setting up and/or operating machine delivery systems
maintaining the cutting process
monitoring the rotary cutting process
conducting machine shutdown procedures
identify checks needed when:
substrate is removed from the machine
waste is removed from the machine and surrounding area for disposal or recycling
cutting devices or knives are cleaned, stored or replaced ready for the next run
identify areas of the delivery system to monitor to ensure trouble-free operation
identify sectors of the basic in-line printing/converting/binding/finishing process that may need to be monitored and adjusted to meet approved standards
explain production difficulties that can be expected during production runs and areas that may need adjustment to meet client requirements
explain the procedure for correcting common machine faults
identify areas of the machine that require cleaning at the end of the run
determine production records to be kept or written up and information that should be included
determine quality aspects to consider in a completed rotary cutting job
identify machine manuals, safety and other documentation relevant to this task, where they are kept, and the information included in them.
Assessment Conditions
Gather evidence to demonstrate consistent performance in conditions that are safe and replicate the workplace. Noise levels, production flow, interruptions and time variances must be typical of those experienced in the converting, binding and finishing field of work and include access to special purpose tools, equipment and materials.
Assessors must satisfy NVR/AQTF assessor requirements.
Foundation Skills
This section describes language, literacy, numeracy and employment skills incorporated in the performance criteria that are required for competent performance.
Skill | Performance Criteria | Description |
Reading | 1.2, 3.3, 3.4, 5.1 | Recognises and interprets text to establish job requirements from information contained within relevant procedures and specifications |
Writing | 3.7, 3.8, 4.1, 4.4, 6.7 | Enters routine data associated with production processes and enterprise procedures |
Oral Communication | 3.2, 3.7, 3.8, 4.1, 4.4, 5.2 | Speaks clearly using appropriate vocabulary, tone and pace to report faults and discrepancies to supervisors or discuss job requirements with colleagues |
Navigate the World of work | 2.1-2.4, 3.1-3.3, 3.5, 3.7-3.9, 4.1-4.4, 5.1-5.3, 6.1-6.7 | Complies with legislative requirements and follows organisational policies and procedures relevant to own role, particularly with regard to safe operation of machinery and equipment |
Interact with others | 3.2, 3.7, 3.8, 4.1, 4.4, 5.2 | Cooperates with others as part of familiar routine activities, and contributes to specific activities requiring joint responsibility and accountability Follows accepted practices and protocols for reporting issues to supervisors |
Get the work done | 1.1, 2.1-2.4, 3.2-3.6, 3.9, 4.2, 4.3, 4.5, 5.1, 5.3 | Takes responsibility for planning and organising own workload, identifying ways of sequencing and combining elements for greater efficiency Recognises and anticipates an increasing range of familiar problems, their symptoms and causes; actively looking for early warning signs and implementing contingency plans Follows routine procedures for using digital technology by reading data from electronic monitoring and control systems |
Range Statement
This section specifies different work environments and conditions that may affect performance. Essential operating conditions that may be present (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) are included.
Delivery systems MUST include EITHER: | reel OR sheet |
Monitoring and adjusting MUST include EITHER: | reel stand and rewind section web control system sheeting section OR feeder and delivery system sheet pick-up and transportation system transfer system |
Sectors
Converting, Binding and Finishing