This unit requires the individual to produce complex folded and glued products and to correctly shut down and clean machinery when the job is completed.

ELEMENT

PERFORMANCE CRITERIA

1. Maintain operation of carton blank system

1.1. Feeder is monitored and adjusted to ensure continuous and efficient feeding to machine

1.2. Carton blank pick-up and transportation system is monitored and adjusted to ensure accurate and continuous sheet handling and efficient operation

1.3. Transfer systems are monitored and adjusted to ensure correct and continuous carton blank handling and efficient operation

1.4. Substrate is added to process according to job specifications

1.5. Delivery is monitored and adjusted to ensure quality and efficient product delivery

2. Maintain complex carton folding and gluing process

2.1. Registration and accuracy of folds are monitored and adjusted to ensure the quality of product meets the standard of the approved sample

2.2. Gluing process is monitored and adjusted to ensure accuracy of glue application and strength of adhesion to conform to quality standards

3. Maintain operation of production process

3.1. Production process is operated in association with fellow workers and according to enterprise specifications and planned daily schedule

3.2. Production is maintained according to OHS requirements, manufacturer's specifications and enterprise procedures

3.3. Performance is monitored and verified using the process control system according to enterprise procedures

3.4. Production difficulties are anticipated and preventive action is taken to prevent occurrence by timely intervention

3.5. Process adjustments to eliminate problems are reported according to enterprise procedures

3.6. Faulty performance of equipment is identified and reported according to enterprise procedures

3.7. Waste is sorted according to enterprise procedures

4. Identify and rectify problems

4.1. Problems in folding and gluing machine operation are identified and reported according to enterprise requirements

4.2. Adjustments or corrections are carried out according to specified procedures and consistent with operator's skill level

4.3. Complex folding/gluing machine operation is checked to ensure correct operation

5. Conduct shutdown of production process

5.1. Correct shutdown sequence is followed according to manufacturer's specifications and enterprise procedures

5.2. Shutdown is conducted in association with fellow workers and in compliance with OHS requirements

5.3. Waste is removed from operating area and recycled or disposed of, where required, according to regulatory requirements and enterprise procedures

5.4. Machine faults requiring repair are identified and reported to designated person, according to enterprise procedures

5.5. Repair/adjustment is verified prior to resumption of operations

6. Clean folding/gluing machine at end of run

6.1. Folding unit is cleaned ready for next run

6.2. Gluing unit is disengaged and cleaned ready for next run

6.3. Transport and delivery systems are cleaned ready for next run

6.4. Production records or other documentation are accurately completed where required by enterprise procedures

Required skills

OHS in relation to operating machinery such as safely switching off machinery before cleaning is started

communication skills when reading and interpreting job requirements from job documentation or production control system

planning and organising by setting up the carton blank transportation system before the carton delivery system

teamwork when maintaining production processes in association with colleagues

using technology by using carton folding and gluing machines

problem solving by interpreting results to determine adjustment requirements

Required knowledge

Carton blank transportation and delivery systems

OHS factors that must be considered when setting and/or operating folder/gluer transport and delivery systems

areas of the feeder that should be monitored to ensure trouble-free operation?

parts of the pick-up system that have to be adjusted to ensure accurate and continuous feeding

areas of the delivery system that should be observed to prevent damage to the finished pr

areas to continually observe to ensure the smooth trouble-free operation of the machine

areas of the gluing unit that should be continuously monitored?

OHS factors that must be considered when adjusting/correcting the machine

causes of incorrect folding and how each may be corrected

segments of quality assurance that would be inspected at the completion of the sample run

action that should be taken if viscosity of adhesive in gluing unit is too low/high

adjustment of the of the glue application

areas of the machine that should be adjusted if carton blank is creasing

areas of the machine that should be adjusted if carton blanks are not entering the machine

areas of the machine that should be adjusted if sheets are not neatly entering delivery

OHS factors that must be considered when cleaning the machine

checks made when correctly shutting down the machine

checks made when the finished work is prepared for dispatch

areas of the machine that need regular cleaning

materials that need to be cleaned from the machine

keeping the machine clear of surface rust (condensation)

recommended cleaning agents

production records that need to be kept or written up

information that should be included in this reporting procedure

quality aspects that should be considered in a completed folded carton

steps that should be taken to ensure that important features of the production control system are followed

altering production need to be altered to meet client requirements

items to be checked against the client's sample

machine manuals, safety and other documentation that are relevant to this task and where they are kept and information that is included in these documents

The Evidence Guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.

Overview of assessment

Critical aspects for assessment and evidence required to demonstrate competency in this unit

Evidence of the following is essential:

produce a range of complex cartons as required in normal production on a Royal 40, a Bobst Media or a Bobst Domino

demonstrate an ability to find and use information relevant to the task from a variety of information sources

produce THREE crashlock, six-corner and specialty work carton jobs, with different sizes and weights of carton board and including use of multiple gluing units, according to manufacturer's and job specifications, enterprise procedures and the listed Performance Criteria

evidence for assessment may be gathered from assessment of the unit of competency alone or through an integrated assessment activity.

Context of and specific resources for assessment

Assessment must ensure:

assessment may take place on the job, off the job or a combination of these

off the job assessment must be undertaken in a closely simulated workplace environment.

Method of assessment

A range of assessment methods should be used to assess practical skills and knowledge. The following examples are appropriate for this unit:

direct questioning combined with review of portfolios of evidence and third party workplace reports of on-the-job performance by the candidate.

Guidance information for assessment

Holistic assessment with other units relevant to the industry sector, workplace and job role is recommended

The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.

Machines may include:

royal 40, a Bobst Media or Bobst Domino with a computerised label printing unit.

Glue may include:

PVA and hot melt.

Unit sector

Converting, Binding and Finishing

This unit contains employability skills.