ICPCF393C
Set up machine for envelope manufacture

This unit describes the performance outcomes, skills and knowledge required to set up a machine to cut and add patches during the manufacture of envelopes.

Application

This unit requires the individual to set up a machine to cut and add patches during the manufacture of envelopes.


Elements and Performance Criteria

ELEMENT

PERFORMANCE CRITERIA

1. Calibrate and adjust settings

1.1. All details required for the job are checked and confirmed against job specifications

1.2. The correct materials are checked and available for the job

1.3. Adhesives are selected that are appropriate for the substrate, the application process and the machine

1.4. Work area is made safe and prepared for production according to safety requirements

1.5. Window cutting and patch unit settings are set according to job specifications

1.6. Measurement settings are checked thoroughly against job specifications before production is commenced

1.7. Window position and size are set to meet requirements to ensure the machine runs efficiently and safely

1.8. Wastage is monitored, kept to a minimum and correctly disposed of according to enterprise quality standards

1.9. The process is monitored to maintain quality and identify opportunities for improvement

2. Confirm quality

2.1. A sample is produced and checked for conformance with quality standards, and adjustments made if required

2.2. The efficiency, quality and output rate of the production run are monitored for problems and any deficiencies resolved

2.3. Any machine faults are reported to appropriate responsible person

2.4. The locations of all emergency shutdown buttons and triggers are known

Required Skills

Required skills

OHS when making the work area safe and preparing for production according to safety requirements

communication skills when reporting any machine faults to the appropriate person

planning and organising when checking the measurement settings against the job specifications before production is commenced

teamwork when maintaining the production process in association with other staff

using technology when operating an envelope manufacturing machine

problem solving when adjusting machine settings in order to maintain quality standards

Required knowledge

enterprise documentation procedures

enterprise quality standards

enterprise faults procedures

principles of envelope manufacture and setting window cutting and patching units

common faults associated with window cutting and patching

Evidence Required

The Evidence Guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.

Overview of assessment

Critical aspects for assessment and evidence required to demonstrate competency in this unit

Evidence of the following is essential:

set up the window cutting and patching units and produce a clean window cut with correct gum position, even level of patch size and position according to job specifications and within the production timeframe

demonstrate all safety devices on the machine

for valid and reliable assessment of this unit, evidence should be gathered over a period of time to indicate consistent performance in setting up the manufacturing process

evidence for assessment may be gathered from assessment of the unit of competency alone or through an integrated assessment activity.

Context of and specific resources for assessment

Assessment must ensure:

assessment may take place on the job, off the job or a combination of both of theses. Off the job assessment must be undertaken in a closely simulated workplace environment

envelope manufacturing equipment with window cutting and patching units.

Method of assessment

A range of assessment methods should be used to assess practical skills and knowledge. The following examples are appropriate for this unit:

direct questioning combined with review of portfolios of evidence and third party workplace reports of on-the-job performance by the candidate.

Guidance information for assessment

Holistic assessment with other units relevant to the industry sector, workplace and job role is recommended.


Range Statement

The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.

Job specifications may include:

job sheets

batch processing orders

job specs.

Correct materials may include:

glues

papers

coated

uncoated

pre-printed.

Settings may include:

paper tension

paper thickness

coated

non-coated materials

glue drying times

wastage allowance

substrate.


Sectors

Unit sector


Competency Field

Converting, Binding and Finishing


Employability Skills

This unit contains employability skills.


Licensing Information

Not applicable.