Application
This unit requires the press operator to access or input print quality data and to perform adjustments to match the proof and maintain print quality throughout the run. |
Elements and Performance Criteria
ELEMENT | PERFORMANCE CRITERIA |
1. Set up print control devices | 1.1. CIP3/CIP4 data is accessed for the next print run 1.2. Data is pre-set and options/parameters selected according to the next job specifications 1.3. Data is released to press according to manufacturer's recommended procedure 1.4. Accurate position and fit are attained 1.5. Approximate colour, density and ink/water balance if applicable are attained 1.6. Make ready sheets are scanned or corrections are inputted until the print matches the proof or the client's requirements 1.7. Client or supervisor's approval is obtained prior to running the job |
2. Maintain print quality throughout the run | 2.1. Print quality is continuously monitored visually 2.2. Sheets are scanned to verify visual assessment 2.3. Any correctional data is released to maintain print quality |
3. Maintain equipment | 3.1. Maintenance tasks are performed according to the operator's manual 3.2. Equipment is calibrated according to the operator's manual |
Required Skills
|
Required skills |
OHS in relation to operating machinery such as safely switching off machinery before cleaning is started communication of ideas and information by communicating specifications for colour profiles and pre-press requirements for printing to clients collecting, analysing and organising information by collating and integrating information on colour profiles and press performance planning and organising activities by establishing sequence of monitoring to ensure quality output teamwork when integrating job planning with pre-press mathematical ideas and techniques by understanding and applying colour profiles and curves to machine adjustment problem-solving skills by monitoring samples and adjusting equipment as necessary use of technology by efficiently using monitoring systems to ensure quality output |
Required knowledge |
ICC profiling underlying principle of densitometry underlying principle of spectrophotometry basic underlying principles for determining tolerance in densitometry and spectrophotometry an original colour control strip determinates determining the accuracy of the elements in a colour strip ensuringconsistent print quality output recognising colour contamination setting alarm limits for colour contamination sample to ensure consistency processes that you would put in place if sample varies from standard ways quality can vary and how they can be fixed computerised functions, common faults and electronic registration systems information that you need from pre-press to ensure quality product information that you need to give to pre-press to ensure quality product meaning of the terms registration, fit, position and alignment importance of registration marks |
Evidence Required
The Evidence Guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package. | |
Overview of assessment | |
Critical aspects for assessment and evidence required to demonstrate competency in this unit | Evidence of the ability to: may be defined by enterprise/operator or default tolerances, client requirements, colour tolerances, industry standards demonstrate an ability to find and use information relevant to the task from a variety of information sources set up and align monitoring device to appropriate standards on THREE occasions produce profiles of samples taken during THREE different print runs that show print production is within agreed tolerances, if possible using different variables evidence for assessment may be gathered from assessment of the unit of competency alone or through an integrated assessment activity. |
Context of and specific resources for assessment | Assessment must ensure: assessment may take place on the job, off the job or a combination of these. Off the job assessment must be undertaken in a closely simulated workplace environment a computerised printing machine. |
Method of assessment | A range of assessment methods should be used to assess practical skills and knowledge. The following examples are appropriate for this unit: direct questioning combined with review of portfolios of evidence and third party workplace reports of on-the-job performance by the candidate. |
Guidance information for assessment | Holistic assessment with other units relevant to the industry sector, workplace and job role is recommended, for example: this unit is an additional skill to most printing units and may be assessed at the same time. |
Range Statement
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included. | |
Presses may include: | press must be aligned to recognised colour standard. |
Quality standards may include: | CIP3 and CIP4. |
Monitoring systems may include: | built-in or add-on or stand alone systems including: image control. Electronic colour management eg densitometry, colour imagery, Komori system, spectrophotometry. |
Electronic data transfer may include: | press management systems such as Prepress Interface, PECOM. |
Plates may include: | colour bars must be original. |
Specified standards may include: | may be defined by enterprise/operator or default tolerances, client requirements, colour tolerances, industry standards. |
Sectors
Unit sector |
Competency Field
Printing |
Employability Skills
This unit contains employability skills. |
Licensing Information
Not applicable.