1

Identify work requirements

1.1

Work instructions are obtained and followed

1.2

Occupational health and safety (OHS) requirements for application of patterns and designs to glass surfaces, including personal protective equipment, are observed throughout the work

1.3

Tools and equipment suitable to the work method are assembled and the process for applying patterns and designs to glass surfaces identified

2

Prepare for work

2.1

Work sequence is planned in a logical order to suit the job and workplace procedures

2.2

Tools, equipment and materials are selected and checked prior to use to ensure they are appropriate for the work, serviceable and in a safe condition

2.3

Pattern or design template (if required) is produced from plan or design or drafted from existing design or pattern

2.4

Procedures are identified for checking the quality of materials and items produced and quality requirements for each stage of the application process

3

Apply pattern or design to glass surface

3.1

Pattern or design template is applied or glass surface is masked, as necessary, with appropriate materials

3.2

Pattern or design is applied to glass surface in accordance with workplace procedures or industry practice

3.3

Problems occurring during operation are identified and reported to appropriate personnel in accordance with workplace procedures, and any authorised changes in working procedures followed

4

Complete work

4.1

Product is inspected for quality of work and repaired or discarded, as required, in accordance with workplace procedures

4.2

Waste and scrap material is removed for disposal or recycling, as required

4.3

Work area is cleaned and rubbish disposed of, as appropriate

4.4

Tools and equipment are cleaned and stored following workplace procedures

4.5

Workplace documentation is completed, as required

Required skills include:

collecting, organising and understanding information related to work orders, basic plans and safety procedures

using communication skills to the level required to confirm work requirements and specifications; communicate effectively regarding work requirements with supervisors, other workers and customers; report work outcomes and problems; and relate to people from a range of social, cultural and ethnic backgrounds, and of varying physical and mental abilities

using literacy skills to the level required to understand information related to work orders, including common industry terminology, plans and safety procedures; prepare reports; and interpret technical information and specifications

planning and organising activities, including the preparation and layout of the work area, and the obtaining of equipment and materials to avoid any backtracking, workflow interruptions or wastage

working with others and in a team by recognising dependencies and using cooperative approaches to optimise workflow and productivity

using mathematical ideas and techniques to correctly complete measurements, calculate work requirements and assemble required materials

using pre-checking and inspection techniques to plan work, and avoid re-working and wastage

using workplace technology related to the application of designs and/or patterns to glass surfaces

modifying activities to cater for variations in workplace contexts and environment

Required knowledge includes:

the qualities and characteristics of glass and materials, including hazards and handling requirements

procedures, techniques and means of applying patterns and designs to glass surfaces

workplace safety system requirements related to the application of patterns and designs to glass surfaces

workflow requirements in relation to other stages of the work process

The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.

Overview of assessment

Assessment processes and techniques must be culturally appropriate and appropriate to the language, literacy and numeracy capacity of the candidate and the work being performed.

Critical aspects for assessment and evidence required to demonstrate competency in this unit

Assessors must be satisfied that the candidate can competently and consistently:

interpret work order/job instruction and locate and apply relevant information to apply patterns and/or designs to glass surfaces

prepare to apply patterns and designs to glass surfaces

follow work instructions, operating procedures and inspection practices to:

minimise the risk of injury to self and others

prevent damage to goods, equipment and products

maintain required production output and product quality

as a minimum:

draw and cut freehand designs

set up, process, upload and cut designs from computerised software programs

stage sandblasting on glass

stage screen printing on glass

work effectively with others.

Context of and specific resources for assessment

The application of competency is to be assessed in the workplace or realistically simulated workplace.

Assessment is to occur under standard and authorised work practices, safety requirements and environmental constraints.

Assessment of essential underpinning knowledge, other than confirmatory questions, will usually be conducted in an off-site context.

Assessment is to comply with relevant regulatory or Australian Standard requirements.

The following resources should be made available:

template materials/patterns

masking materials

application equipment

workplace operating procedures

unprocessed glass

personal protective equipment

an appropriate work area.

Method of assessment

Assessment must satisfy the endorsed Assessment Guidelines of the LMF02 Furnishing Industry Training Package.

Assessment methods must confirm consistency and accuracy of performance (over time and in a range of workplace relevant contexts) together with application of underpinning knowledge.

Assessment methods must be by direct observation of tasks and include questioning on underpinning knowledge to ensure correct interpretation and application.

Assessment may be applied under project-related conditions (real or simulated) and require evidence of process.

Assessment must confirm a reasonable inference that competency is able not only to be satisfied under the particular circumstance, but is able to be transferred to other circumstances.

Assessment may be in conjunction with assessment of other units of competency.

Guidance information for assessment

The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.

Work instructions may include:

material to be used for application of design or pattern

pattern or plan to be followed

process required to complete work tasks

items to which pattern or design is to be applied

holding area for completed items

the material curing time (if required) for the type of material used and type of glass

Patterns and designs may be:

applied to glass surfaces by chemical etching, sandblasting or screen printing

Personal protective equipment includes:

that prescribed under legislation, regulation and enterprise policies and practices, and may include:

gauntlets

gloves

safety glasses

hard hats

safety footwear

aprons and overalls

Tools and equipment may include:

sandblasting equipment

masking materials

templates

etching chemicals and screen printing equipment

Workplace procedures include:

equipment manufacturer specifications and operational procedures

safety standards, including personal protective equipment, OHS regulations and enterprise requirements

materials safety data sheets (MSDS)

workplace procedures relating to the application of patterns or designs to glass

work instructions, including job sheets, plans, drawings and designs

Materials are to include, but are not limited to:

annealed glass

laminated glass

toughened glass and mirrors