Nil

ELEMENT

PERFORMANCE CRITERIA

1. Design package

1.1. Artwork to be framed is identified and its qualities and framing requirements assessed

1.2. A provisional design package is developed

1.3. Design is modified as required and approved in accordance with workplace procedures

1.4. Work sequence is planned to suit the job

2. Cut and join mouldings

2.1. Workplace health and safety requirements, including personal protection needs, are observed throughout the work

2.2. Tools, equipment and materials required for cutting and joining of mouldings are selected and checked prior to use to ensure that they are appropriate for the work in terms of quality, serviceability and safety

2.3. Material is set out for cutting to length according to work instructions and workplace procedures

2.4. Tools, machines and equipment are used in accordance with safety requirements and manufacturers' specifications

2.5. Mouldings are cut to length and checked for quality and fit in accordance with workplace practices

2.6. Components are laid out and fixed in preparation for joining according to work instructions and workplace procedures

2.7. Components are joined and checked for quality, alignment and finish according to workplace practices

3. Cut mat board

3.1. Tools, equipment and materials required for cutting mat board are selected and checked prior to use to ensure that they are appropriate for the work in terms of quality, serviceability and safety

3.2. Mat board material is set out for cutting according to work instructions and workplace procedures

3.3. Tools, machines and equipment are used in accordance with safety requirements and manufacturers' specifications

3.4. Mat boards are cut and checked for quality in accordance with workplace practices

4. Cut glass for framing

4.1. Tools, equipment and materials required for cutting glass are selected and checked prior to use to ensure that they are appropriate for the work in terms of quality, serviceability and safety

4.2. Glass is set out for cutting according to work instructions and workplace procedures

4.3. Tools, machines and equipment are used in accordance with safety requirements and manufacturers' specifications

4.4. Glass is cut and checked for quality in accordance with workplace practices

5. Mount artwork

5.1. Method of mounting is determined

5.2. Mounting equipment is set up according to operating procedures and workplace practice

5.3. Artwork is positioned on substrate according to job requirements and placed in mounting equipment

5.4. Mounting equipment is operated in accordance with manufacturer instructions and workplace procedures

5.5. Assembled artwork is removed from equipment, inspected for quality in accordance with workplace procedures

6. Assemble artwork package

6.1. Fabricated components are cleaned and laid out for assembly in accordance with workplace procedures

6.2. Artwork is attached to backing material using the selected method

6.3. Frame components are assembled, adjusted as required to fit and fixed

6.4. Frame is fitted over package and the backing is fixed in accordance with workplace procedures

6.5. Fittings, attachments and hanging aids are attached in accordance with workplace procedures

6.6. Package is inspected for quality and processed in accordance with workplace procedures

7. Complete work

7.1. Work area is cleaned, hand and/or power tools and equipment are cleaned, maintained and stored in accordance with workplace procedures

7.2. Off-cuts and unused materials are collected and stored for reuse or disposed following workplace procedures

7.3. Waste and scrap materials are dealt with following workplace procedures

Required skills

collect, organise and understand information related to work orders, basic plans and safety procedures

communicate ideas and information to enable confirmation of work requirements and specifications, coordination with work supervisor, other workers and the reporting of work outcomes and problems

plan and organise activities, including the preparation and layout of the work area and the obtaining of equipment and materials to avoid any back tracking, workflow interruptions or wastage

work with others and in a team by recognising dependencies and using cooperative approaches to optimise workflow and productivity

use mathematical ideas and techniques to correctly complete measurements, calculate area and estimate material requirements

use pre-checking and inspection techniques to anticipate working problems, avoid re-working and wastage

use the limited workplace technology related to the framing of simple artwork, including tools, equipment, materials and measuring devices

Required knowledge

design requirements for simple artwork

the preparation of plans/drawings/set-outs

workflow and steps in relation to framing simple artwork

identification of hand and basic picture framing processing tools, materials, equipment, processes and procedures

The Evidence Guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.

Critical aspects of evidence

Interpret work instructions and locate and apply relevant information

Apply safe handling requirements for equipment, products and materials, including use of personal protective equipment

Follow work instructions, operating procedures and inspection practices to:

minimise the risk of injury to self and others

prevent damage to goods, equipment and products

achieve required production output and product quality

Adapt or vary glass and glazing designs

As a minimum, design, prepare, fabricate and assemble at least one item of simple artwork

Work effectively with others

Modify activities to cater for variations in workplace contexts and environment

Resource implications

Access to plans/designs, picture framing hand tools and/or basic processing machines, equipment, materials, a work area and a specified project.

Method of assessment

Assessment should be by direct observation of tasks and questioning on underpinning knowledge.

Assessment may be conducted in conjunction with assessment of the other sector specialist unit of competency where appropriate.

Context of assessment

Assessment may occur on the job or in a workplace simulated facility with relevant equipment, materials, work instructions and deadlines.

The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.

Unit context

Workplace health and safety requirements include OHS legislation, building codes, material safety management systems, hazardous substances and dangerous goods code and local safe operating procedures

Work is carried out in accordance with legislative obligations, environmental legislation, relevant health regulations, manual handling procedures and organisation insurance requirements

Work involves reading and interpreting plans, developing set-outs, using hand and power tools, operating basic machinery, applying quality requirements and applying product finishing techniques and materials

Work is conducted under supervision and guidance

Simple artwork

Simple artwork is flat paper-based artwork not requiring any conservation measures

Project and design is to be determined in consultation with supervisor/teacher

Tools and equipment

Tools and equipment to be used under supervision and guidance may include, but is not limited to:

guillotines, static mounted circular saws, drop saws, docking saws and mitre saws

underpinners (V-nailers), screwdrivers

hand-operated tools, including cutting blades, clamps, marking out tools

mat cutters

appropriate mounting tools and equipment

flat felt-covered cutting table, glass cutters, squares, tape measures, marking pens/pencils

Materials to be used may include but not limited to:

timber, touch-up materials, glues, sandpaper

standard mat board material

appropriate mounting materials

glass

Personal protective equipment

Personal protective equipment is to include that prescribed under legislation, regulations and enterprise practices and procedures. It may include:

gloves

safety glasses

gauntlets

footwear

earmuffs

aprons and overalls

Unit sector

Picture Framing

This unit contains employability skills.