This unit supports the attainment of skills and knowledge required for competent workplace performance in furnishing operations of all sizes. Prepare product for Standards testing applies to a factory/onsite environment and involves application of skills and knowledge at a production worker/tradesperson/supervisory level. These skills and knowledge are to be used within the scope of the individual's job and authority.

Nil

ELEMENT

PERFORMANCE CRITERIA

1. Identify sample for testing

1.1. Applicable OHS, legislative and organisational requirements relevant to the certification process are verified and complied with

1.2. A sample is identified in accordance with Standard requirements

2. Prepare documentation

2.1. Documentation is prepared in accordance with Australian Standards and organisational requirements

2.2. Sample is packaged for transportation to a recognised testing facility in accordance with Australian Standard requirements

3. Post test action

3.1. Reports of tests are actioned in accordance with Australian Standard and organisational requirements

3.2. Where samples fail a test element, reports are presented to management for remedial action

3.3. Where samples pass, management ensure that product Certification of Compliance is prepared and an appropriate notice affixed to the product in accordance with Australian Standards and organisational requirements

3.4. Records of all processes and actions are included in the organisation's quality system

Required skills

collect, organise and understand information related to work orders, basic plans and safety procedures

communicate ideas and information to enable confirmation of work requirements and specifications, coordination of work with site supervisor, other workers and customers, and the reporting of work outcomes and problems

work with others and in a team by recognising dependencies and using cooperative approaches to optimise work flow and productivity

use pre-checking and inspection techniques to ensure the tools are serviceable and ready to use and avoid re-work and wastage

identifying problems and equipment faults and demonstrate appropriate response procedures

recognise and respond to circumstances outside instructions or personal competence

plan and organise activities including the preparation and layout of own worksite and the obtaining and use of tools and materials to avoid any backtracking, work flow interruptions or wastage

use mathematical ideas and techniques to correctly complete measurements, calculate area and estimate other material requirements

complying with legislation, regulations, standards, codes of practice and established safe practices and procedures for manufacturing/installing security screens and grills

clarify and confirm work instructions

plan own work within the given task parameters

apply systematic and effective time management

accept responsibility for given tasks

set, monitor and satisfy personal work goals

satisfy the competency requirements for the job

maintain current knowledge of tools and materials

maintain current knowledge of security screens and grills manufacturing and installation techniques

seek learning opportunities

use the workplace technology related to the selection, preparation and operator maintenance of security screens and grills hand and power tools including calculators and measuring devices

Required knowledge

organisational and site standards, requirements, policies and procedures for certification of products in accordance with the Australian Standards

environmental protection requirements relating to the disposal of waste material

established communication channels and protocols

problem identification and resolution

types of tools and equipment and procedures for their safe use, operation and maintenance

storage systems and labelling

procedures for the recording, reporting and maintenance of workplace records and information

The Evidence Guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.

Critical aspects for assessment and evidence required to demonstrate competency in this unit

Comply with legislation, regulations, standards, codes of practice and established safe practices and procedures for seeking the certification of compliance of security screens and grills with Australian Standards

Communicate effectively and work safely with others in the work area

Context of, and specific resources for assessment

The application of competency is to be assessed in the workplace or realistically simulated workplace

Assessment is to occur under standard and authorised work practices, safety requirements and environmental constraints

Assessment is to comply with relevant regulatory or Australian Standards requirements

The following resources should be made available:

workplace location or simulated workplace

materials and equipment relevant to identifying a sample

specifications and work instructions

Method of assessment

Assessment must satisfy the endorsed assessment guidelines of the Furnishing Industry Training Package

Assessment methods must confirm consistency and accuracy of performance (over time and in a range of workplace relevant contexts) together with application of underpinning knowledge

Assessment methods must be by direct observation of tasks and include questioning on underpinning knowledge to ensure its correct interpretation and application

Assessment may be applied under project related conditions (real or simulated) and require evidence of process

Assessment must confirm a reasonable inference that competency is able not only to be satisfied under the particular circumstance, but is able to be transferred to other circumstances

Assessment may be in conjunction with assessment of other units of competency

The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.

OHS requirements

are to be in accordance with Commonwealth, State or Territory legislation and regulations, organisational safety policies and procedures. Requirements may include but not be limited to the use of personal protective equipment and clothing, fire fighting equipment, first aid equipment, hazard and risk control and elimination of hazardous materials and substances, manual handling including lifting and carrying.

Legislative requirements

are to be in accordance with applicable legislation from all levels of government that affect organisational operation. Requirements may include but not be limited to award and enterprise agreements, industrial relations, Australian Standards, confidentiality and privacy, OHS, the environment, equal opportunity, anti-discrimination, relevant industry codes of practice, duty of care and heritage.

Organisational requirements

may include but not be limited to legal, organisational and site guidelines, policies and procedures relating to own role and responsibility, quality assurance, procedural manuals, quality and continuous improvement processes and standards, OHS, emergency and evacuation, ethical standards, recording and reporting, access and equity principles and practices, equipment use, maintenance and storage, environmental management (waste disposal, recycling and re-use guidelines)

Sample

is the product in the form of a production model security screen or grill with ancillary fittings such as hinges and locks where applicable

Actioned

refers to bringing the report findings to the attention of the appropriate organisational appointees responsible for resolving or processing the report's findings

Certification of Compliance

refers to the marking/labelling able to be affixed to product once it has passed the appropriate test at an Australian Standards recognised testing facility.

Unit sector

Security Screens and Grills

This unit contains employability skills.