Application
This unit requires application of hand skills, standard trade practices and systems knowledge in the inspection, testing and troubleshooting of aircraft pneumatic systems and components. Applications include pneumatic systems and components fitted to both fixed and rotary wing aircraft. |
Prerequisites
Remove and install aircraft pneumatic system components | ||
Elements and Performance Criteria
ELEMENT | PERFORMANCE CRITERIA |
1. Inspect pneumatic systems and components. | 1.1. Isolation tags already attached to the system or related systems are checked and aircraft configured for safe system inspection and operation in accordance with specified procedures. 1.2. Pneumatic system is visually or physically checked for external signs of defects in accordance with specified procedures. |
2. Test pneumatic systems | 2.1. The aircraft and pneumatic systems are correctly prepared, in accordance with specified procedures, for the application of power. 2.2. Power is applied and system functionally tested, in accordance with specified procedures, for evidence of malfunction or leaks. 2.3. System calibration or adjustments are performed in accordance with specified procedures. |
3. Prepare for troubleshooting | 3.1. Relevant maintenance documentation and modification status, including system defect/ service difficulty reports where relevant, are interpreted to identify an unserviceability. |
4. Troubleshoot pneumatic systems. | 4.1. Available information from maintenance documentation and inspection and test results is used, where necessary, to assist in fault determination. 4.2. Maintenance manual fault diagnosis guide and logical processes are used to ensure efficient and accurate troubleshooting. 4.3. Specialist advice is obtained, where required, to assist with the troubleshooting process. 4.4. Pneumatic system faults are located and the causes of the faults are clearly identified and correctly recorded in maintenance documentation, where required. 4.5. Fault rectification requirements are determined to assist in planning the repair or adjustment. |
Required Skills
|
Required skills |
Look for evidence that confirms skills in: Use of hand skills and tools in the inspection, adjustment and troubleshooting of pneumatic systems Use of hand skills and tools in the inspection, adjustment and troubleshooting of pneumatic system components The use of maintenance manuals to prepare the aircraft for inspection, testing and troubleshooting of pneumatic systems and components The effective use of maintenance documentation and relevant fault diagnosis guides in the troubleshooting process The recognition of external defects in pneumatic systems and components Application of standard procedures Observance of all relevant occupational health and safety (OHS) practices |
Required knowledge |
Look for evidence that confirms knowledge of: Standard trade practices relating to tool usage and installation/securing of aircraft hardware Pneumatic system: layout operation and characteristics component operation and construction electrical and instrument system interfaces How to configure the aircraft for inspection, testing and troubleshooting of pneumatic systems and components Pneumatic system maintenance requirements and troubleshooting procedures OHS procedures relating to pneumatic systems and components Relevant maintenance manuals Relevant regulatory requirements and standard procedures, including those relating to the handling and control of halon fire extinguishers |
Evidence Required
The Evidence Guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package. | |
Overview of assessment | A person who demonstrates competency in this unit must be able to apply hand skills and use maintenance publications to inspect, test and troubleshoot a range of pneumatic systems and components while applying all relevant OHS procedures. |
Critical aspects for assessment and evidence required to demonstrate competency in this unit | The underlying skills inherent in this unit should be transferable across a range of inspection, testing and troubleshooting applications (including the timely involvement of supervisors or other trades) associated with aircraft pneumatic systems and their components. It is essential that system test procedures take into account all safety precautions applicable to the system being maintained, especially where system operation/switching inter-relates to other systems being maintained. Ability to interpret inspection procedures and specifications (allowable limits) and apply them in practice is critical. Evidence of transferability of skills and knowledge related to inspection, testing and troubleshooting is essential. This may be demonstrated through application across a number of aircraft systems or aircraft types. The application of testing procedures should clearly indicate knowledge of system operation, the relationship of individual components and the links with other systems (if applicable) within the limits of the aircraft/system fault finding guide before undertaking any action. The work plan should take account of applicable safety and quality requirements in accordance with the industry and regulatory standards. A person cannot be assessed as competent until it can be demonstrated to the satisfaction of the workplace assessor that the relevant elements of this Unit of Competency are being achieved under routine supervision on each type of system (Groups 1 to 4) and on at least one component from each of Groups 5 to 9, as listed in the Range Statement. This shall be established via the records in the Log of Industrial Experience and Achievement or, where appropriate, an equivalent Industry . |
Context of and specific resources for assessment | Competency should be assessed in the work environment or simulated work environment, using procedures, tools and equipment specified in maintenance documentation. It is also expected that general purpose tools, test and ground support equipment found in most routine situations would be used where appropriate. The level of troubleshooting is limited in its application to the use of fault diagnosis guides or other similar information. |
Method of assessment | |
Guidance information for assessment |
Range Statement
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included. | |
Note | Range statements listed below are numbered to facilitate specification of the assessment requirements included in the Evidence Guide. |
Pneumatic systems and components | Pneumatic systems include: 1. De-icing 2. Air cycle air conditioning 3. Pressurisation 4. Fire extinguishing Components of pneumatic systems include: 5. Filters, valves, pumps, motors, actuators, regulators 6. Gauges (direct reading), temperature sensors, pressurisation controllers, temperature controllers 7. Heat exchangers, pressure vessels, condensers, compressors, expansion turbines, humidifiers 8. Rigid and flexible pipelines, hoses and fittings 9. Ducting |
Troubleshooting | Troubleshooting involves the use of fault finding charts or similar, to line replacement level. |
Electrical interface | The work can include associated electrical loom terminations and/or plugs. |
Application of this unit may relate to: Scheduled or unscheduled maintenance activities Individual or team related activities | |
Procedures and requirements | Refer to industry standard procedures specified by manufacturers, regulatory authorities or the enterprise |
Sectors
Unit sector |
Competency Field
Aviation maintenance |
Employability Skills
This unit contains employability skills. |
Licensing Information
Not applicable.