This unit requires application of hand skills, the use of maintenance publications and knowledge of propeller and propeller system theory to inspect, test and troubleshoot propellers and propeller system components.

Applications include propeller driven fixed wing aircraft.

MEA307C

Remove and install propeller systems and components

1. Inspect propeller systems and components

1.1. Isolation tags already attached to the system or related systems are checked and aircraft configured for safe system inspection and operation in accordance with applicable maintenance manual

1.2. Propeller system is visually or physically checked for rigging and external signs of defects in accordance with applicable maintenance manual

2. Test propeller systems

2.1. Aircraft and system are correctly prepared in accordance with maintenance manual for the operation of engine and propeller system

2.2. Propeller and system are functionally tested in accordance with applicable maintenance manual for evidence of malfunction or defects

2.3. System calibration or adjustments are performed in accordance with applicable maintenance manual

3. Prepare for troubleshooting

3.1. Relevant maintenance documentation and modification status, including system defect reports, where relevant, are interpreted to identify an unserviceability

4. Troubleshoot propeller systems

4.1. Available information from maintenance documentation and inspection and test results is used, where necessary, to assist in fault determination

4.2. Maintenance manual fault diagnosis guide and logical processes are used to ensure efficient and accurate troubleshooting

4.3. Specialist advice is obtained, where required, to assist with the troubleshooting process

4.4. Propeller system faults are located and the causes of the faults are clearly identified and correctly recorded in maintenance documentation, where required

4.5. Fault rectification requirements are determined to assist in planning the repair

Required skills

Look for evidence that confirms skills in:

applying relevant OHS practices, including the lifting and handling of heavy components

using relevant maintenance documentation and aircraft manuals to:

through visual/physical inspection, recognise external signs of defects or rigging abnormalities in propellers and propeller system components

functionally test propellers and propeller systems and recognise any indication of malfunction or incorrect rigging or adjustment

rig and adjust propeller controls and systems

using fault diagnosis guides and equivalent data, to accurately and efficiently troubleshoot the causes of unserviceabilities in propellers and propeller systems, clearly record details and identify the required rectification actions

Required knowledge

Look for evidence that confirms knowledge of:

fault diagnosis techniques

propeller system layout and operation:

propeller types

propeller terminology

forces acting on a propeller

propeller construction

propeller operation

pitch changing mechanisms

governors and beta control

controls and rigging of propeller controls

maintenance requirements and troubleshooting procedures

ancillary systems and system component operation, including electrical and instrument system interfaces:

de-icing and anti-icing

multi-engine synchronising and synchrophasing

feathering and unfeathering, including auto feathering

pitch reversal

negative torque sensing and protection

de-coupling

braking

thrust and torque measuring and indication

maintenance requirements and troubleshooting procedures

relevant OHS practices, including the requirements for the lifting and handling of heavy components

relevant maintenance manuals

relevant regulatory requirements and standard procedures

The Evidence Guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.

Overview of assessment

A person who demonstrates competency in this unit must be able to apply hand skills, use maintenance publications and propeller and propeller system theory knowledge to inspect, test and troubleshoot propellers and their systems on propeller driven fixed wing aircraft while applying all relevant safety precautions.

Critical aspects for assessment and evidence required to demonstrate competency in this unit

The underlying skills inherent in this unit should be transferable across a range of inspection, testing and troubleshooting applications (including the timely involvement of supervisors or other trades) associated with propeller systems. It is essential that system test procedures take into account all safety precautions associated with propeller system operation, and that awareness be demonstrated of dual inspection requirements associated with work on propeller control systems.

Evidence of transferability of skills and knowledge related to inspection, testing and troubleshooting is essential. This may be demonstrated through application across a number of aircraft systems or aircraft types. Ability to interpret inspection procedures and specifications (allowable limits) and apply them in practice is critical. The application of testing procedures should also clearly indicate knowledge of system operation. System operation knowledge, the relationship of individual components and the links with other systems will be necessary to supplement evidence of ability to troubleshoot the system within the limits of the aircraft/system fault finding guide before undertaking any action. The work plan should take account of applicable safety and quality requirements in accordance with the industry and regulatory standards.

A person cannot be assessed as competent until it can be demonstrated to the satisfaction of the workplace assessor that the relevant elements of the unit of competency are being achieved under routine supervision on at least one item from each of Groups 1 to 4 listed in the Range Statement (Group 5 may be omitted where it is not applicable to the enterprise). This shall be established via the records in the Log of Industrial Experience and Achievement or, where appropriate, an equivalent Industry Evidence Guide.

Context of and specific resources for assessment

Competency should be assessed in the work environment or simulated work environment using tools and equipment specified in maintenance manuals. It is also expected that general purpose tools, test and ground support equipment found in most routine situations would be used where appropriate. The level of troubleshooting is limited in its application to the use of fault diagnosis guides or other similar information.

Method of assessment

Guidance information for assessment

The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.

Note

Range statements listed below are numbered to facilitate specification of the assessment requirements included in the Evidence Guide

Propeller and propeller systems

Propeller and systems may include:

1. Propellers, including spinners, where fitted

2. Constant speed, feathering and reversing propeller drives

3. Beta control systems and governors

4. Controls and linkages

5. De-ice/anti-ice equipment

Troubleshooting

Troubleshooting involves the use of fault-finding charts or similar, to line replacement level

Application of this unit may relate to:

scheduled or unscheduled maintenance activities

individual or team-related activities

Procedures and requirements

Refer to industry standard procedures specified by manufacturers, regulatory authorities or the enterprise

This unit contains employability skills.