Application
This unit requires application of skills and knowledge relating to the maintenance, installation and removal of personal restraint systems. Maintenance may be performed in-situ or in a maintenance workshop and involves inspection, fault diagnosis, replacement of parts, completion of repairs and cleaning. The unit applies to a range of personal restraint systems. |
Prerequisites
Interpret occupational health and safety practices in aviation maintenance | |
Plan and organise aviation maintenance work activity | |
Apply quality standards applicable to aviation maintenance processes | |
Interpret and use aviation maintenance industry manuals and specifications | |
Complete aviation maintenance industry documentation | |
Perform basic hand skills, standard trade practices and fundamentals in aviation maintenance | |
Operate and maintain sewing and overlocking machines | |
Machine sew materials |
Elements and Performance Criteria
1. Maintain restraint belts/harnesses | 1.1. Restraint belts/harnesses are inspected for serviceability in accordance with standard procedures 1.2. Identified faults beyond own authority to rectify are reported to supervisor and faulty restraint system is quarantined 1.3. Unserviceable parts of a quick release fitting are inspected, tested and replaced 1.4. Unserviceable parts of the restraint belts/harnesses are replaced to render restraint system serviceable in accordance with standard procedures 1.5. Basic restraint belt/harness stitching repairs are completed in accordance with standard procedures 1.6. Restraint belts/harnesses are cleaned in accordance with standard procedures 1.7. Restraint belts/harnesses are presented for inspection by supervisor in accordance with standard procedures 1.8. Maintenance documentation is completed and processed in accordance with standard enterprise procedures |
2. Remove restraint systems | 2.1. Approval to remove restraint system is obtained in accordance with standard enterprise procedures 2.2. Restraint system is removed from the aircraft in accordance with applicable maintenance publication 2.3. Maintenance documentation is completed and processed in accordance with standard enterprise procedures |
3. Install restraint systems | 3.1. Approval to fit restraint system is obtained in accordance with standard enterprise procedures 3.2. Restraint system is fitted to the aircraft in accordance with applicable maintenance publication 3.3. Maintenance documentation is completed and processed in accordance with standard enterprise procedures |
Required Skills
Required skills |
Look for evidence that confirms skills in: applying OHS practices relating to restraint system maintenance processes, including the selection and correct use of PPE, where applicable handling, storing and organising transport of equipment using MSDS using maintenance publications, drawings and documentation relating to restraint system maintenance using applicable testing and measuring equipment, tools and maintenance documentation to: replace unserviceable components in accordance with approved procedures select and use appropriate restraint system cleaning materials repair restraint systems (both hand and machine sewing) cleaning and maintaining equipment and tools |
Required knowledge |
Look for evidence that confirms knowledge of: relevant regulations, standards, enterprise procedures and maintenance publications OHS procedures relating to restraint system maintenance, including the selection and use of PPE how to obtain MSDS critical nature of maintaining and fitting restraint systems approved cleaning methods for aviation life support equipment components of a restraint system and their function flight line procedures UV degradation types of corrosion and contamination that may affect restraint systems handling, storage and transit procedures relating to life support equipment modification requirements for restraint systems operation of testing and measuring equipment and tools used to maintain restraint systems repair limitations for restraint systems |
Evidence Required
The Evidence Guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package. | |
Overview of assessment | A person who demonstrates competency in this unit must be able to maintain, install and remove restraint systems while observing all relevant safety precautions. |
Critical aspects for assessment and evidence required to demonstrate competency in this unit | The underlying skills inherent in this unit should be transferable across a range of aircraft life support equipment maintenance activities. It is essential that restraint system inspection procedures, cleanliness requirements, repair procedures and safety precautions are fully observed, understood and complied with. Ability to interpret maintenance, installation and removal procedures and apply them in practice is critical. Evidence of transferability of skills and knowledge related to restraint system maintenance, installation and removal is essential. This is to be demonstrated through demonstration of the ability to recognise faults, replace components and perform appropriate repairs that are within the bounds of the individual's authority, and through the demonstration of correct installation and removal procedures. The work plan should take account of applicable safety and quality requirements in accordance with the industry and regulatory standards. A person cannot be assessed as competent until it can be demonstrated to the satisfaction of the workplace assessor that the relevant elements of the unit of competency are being achieved under routine supervision on the inspection, repair, installation and removal of restraint systems, including the demonstration of the ability to recognise a range of faults and their serviceability and repair limitations/tolerances (must include verification of expiry dates of restraint system component parts and recognition of incorrect manufacture). This shall be established via the records in the Log of Industrial Experience and Achievement or, where appropriate, an equivalent Industry Evidence Guide. |
Context of and specific resources for assessment | Competency should be assessed in the workplace or simulated workplace using materials, tools and equipment specified in the maintenance manuals and applicable procedures. It is also expected that general and special purpose tools and ground support equipment would be used where appropriate. |
Method of assessment | |
Guidance information for assessment |
Range Statement
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included. | |
Restraint belts/harnesses | Restraint belts/harnesses may include: fixed point attached harness passenger restraint belts retractable restraint harnesses (will be attached to inertia reel but the inertia reel does not form part of the restraint system) |
Standard procedures | Standard procedures may be found in any or all of: state/territory/Commonwealth OHS legislation, regulations and codes Australian Standards equipment manufacturers' specifications and procedures industry practices safety manual maintenance schedules work instructions maintenance organisation manual MSDS Defence regulations and instructions CASR and advisory material standing instructions |
Faults | Faults may include: broken quick release fitting springs broken stitching contamination corrosion of metal parts damaged hardware damaged quick release fitting screws excessive wear expired date of restraint components incorrect manufacture pulled threads seized quick release fitting lugs UV degradation |
Parts | Parts of the restraint belts/harnesses may include: belt fixed point attachment line hardware (e.g. buckles) harness parachute housing (e.g. pack) quick release fittings, including lugs, springs and screws |
Application of this unit may relate to: scheduled or unscheduled maintenance activities individual or team-related activities |
Sectors
Aircraft life support
Co-Requisites
Conduct self in the aviation maintenance environment |
Employability Skills
This unit contains employability skills. |
Licensing Information
Not applicable.