Application
This unit applies to members of the ADF who are required to apply explosive ordnance safety and handling procedures, hand skills and the use of maintenance documentation/publications in the inspection, testing and troubleshooting of SMS and components. The unit applies to all aircraft with SMS. |
Prerequisites
Remove and install aircraft stores management system components |
Elements and Performance Criteria
1. Prepare to inspect, test and troubleshoot aircraft SMS and components | 1.1. The task is verified from applicable documentation 1.2. Aircraft safety devices are checked in accordance with relevant technical publications and manuals 1.3. Correct SMS component is visually identified for inspection, testing and troubleshooting 1.4. Appropriate tools and ground support equipment are selected in accordance with the task |
2. Inspect SMS component | 2.1. Firing devices are checked and removed, if fitted 2.2. SMS component is inspected in accordance with technical publications and manuals 2.3. Aircraft is prepared for testing and troubleshooting of SMS component in accordance with technical publications and manuals |
3. Test and troubleshoot SMS component | 3.1. SMS component is functionally tested in accordance with applicable technical publications and manuals for evidence of serviceability or malfunction 3.2. SMS component faults are identified in accordance with technical publications and manuals 3.3. Specialist advice is obtained, when required, to assist with the troubleshooting process 3.4. Corrective action is taken in accordance with technical publications and manuals |
4. Complete and process documentation | 4.1. Applicable documentation is completed for SMS component inspection, testing and troubleshooting 4.2. Completed documentation is forwarded to MCS |
Required Skills
Required skills |
Look for evidence that confirms skills in: applying all safety procedures relating to aircraft SMS applying hand skills and use of applicable maintenance manuals in removal and installation of SMS components using ground support equipment and test equipment applying logic processes, taking and interpreting measurements, using test equipment and appropriate documentation and manuals to isolate SMS malfunctions performing system functional tests and checks to isolate system faults and assess post-maintenance serviceability explosive ordnance handling manual handling of SMS components |
Required knowledge |
Look for evidence that confirms knowledge of: the aircraft operating and maintenance environment aircraft SMS and interfaces with other aircraft systems OHS procedures and policies SMS and component test procedures explosive ordnance safety and handling procedures technical publications and manuals hardware and component attachment methods technical documentation procedures |
Evidence Required
The Evidence Guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package. | |
Overview of assessment | A person who demonstrates competency in this unit must be able to inspect, test and troubleshoot SMS and system components while observing all relevant safety precautions. |
Critical aspects for assessment and evidence required to demonstrate competency in this unit | The underlying skills inherent in this unit should be transferable across a range of aircraft SMS and system component inspection, testing and troubleshooting activities. It is essential that assessment confirms the ability to comply with organisational safety requirements and appropriate legislative and regulatory requirements while maintaining SMS systems. The ability to work safely within an explosive ordnance environment, conduct applicable tests and maintain relevant documentation is critical, including checking specifically for: failure to check aircraft safety devices are installed failure to ensure firing devices checked and removed, if fitted commencing task prior to initiating documentation failure to comply with relevant OHS procedures and policies. Evidence of transferability of skills and knowledge related to SMS and system component inspection, testing and troubleshooting is essential. This is to be established through demonstration of the ability to: render the system safe perform relevant inspections and tests troubleshoot faults and perform appropriate rectification action. The work plan should take account of applicable safety and quality requirements in accordance with the industry and regulatory standards. A person cannot be assessed as competent until it can be demonstrated to the satisfaction of the workplace assessor that the relevant elements of the unit of competency are being achieved under routine supervision on a range of inspection, testing and troubleshooting tasks involving the SMS components listed in Groups 1 to 4 in the Range Statement. This shall be established via the records in the Log of Industrial Experience and Achievement or, where appropriate, an equivalent Industry Evidence Guide. |
Context of and specific resources for assessment | Competency should be assessed on aircraft and/or simulator using materials, tools and equipment specified in the maintenance manuals and applicable procedures. It is also expected that general and special purpose tools and ground support equipment would be used where appropriate. |
Method of assessment | In addition to evidence provided in the Log of Industrial Experience assessment methods may include questioning and observation in operational or simulated environments. The unit may be assessed independently or in conjunction with unit MEA605A Inspect, test and troubleshoot aircraft stores suspension system and components. |
Guidance information for assessment |
Range Statement
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included. | |
Task verification | Verified may include: maintenance restrictions aircraft tail number aircraft entered as unserviceable nil stores fitted |
Documentation | Documentation may include: EE500 CAMM2 documents SMS documentation |
Safety devices | Safety devices may include: earth lead aircraft safety pins aircraft switches |
Technical publications and manuals | Technical publications and manuals may include: aircraft publications maintenance instruction manuals and process specifications servicing or service bulletins or structural repair manuals illustrated parts catalogues, aircraft wiring manuals or drawings tooling, equipment or manufacturer's manuals standard practices enterprise aviation regulations and publications |
Note | Range statements listed below are numbered to facilitate specification of the assessment requirements included in the Evidence Guide |
SMS component | SMS components may include: 1. Mission computer 2. Armament computer 3. Encoder/decoder 4. Control unit |
Firing devices and checking | Firing devices may include: stores release cartridges chaff and flares gun system missiles loaded stores Checked may include: visually physically |
Aircraft preparation | Prepared may include: panels opened ground support equipment and test equipment connected |
Specialist advice | Specialist advice may be obtained from: subject matter experts manufacturer systems program office |
Corrective action | Corrective action may include: repair component replacement |
Applicable | Applicable may include: aircraft documentation SMS component documentation |
Application of this unit may relate to: scheduled or unscheduled maintenance activities individual or team-related activities | |
Procedures and requirements | Refer to industry standard procedures specified by manufacturers, regulatory authorities or the enterprise |
Sectors
Aviation maintenance |
Co-Requisites
Not applicable
Employability Skills
This unit contains employability skills. |
Licensing Information
Not applicable.