• MSAPCII297A - Make an object from cloth using an existing pattern

MSAPCII297A
Make an object from cloth using an existing pattern

This unit of competency has been primarily developed for use in a simulated or trial manufacturing environment where there is a high degree of direct supervision. It covers the skills required to make an object from cloth (such as basic decorative items or clothing) following the requirements of an identified pattern. It may or may not require machinery.The elements of this unit should always be assessed in conjunction with other units that relate to the requirements of a specified work or job function Training and assessment against this competency unit must incorporate all relevant OHS and related legislative requirements.

Application

This unit applies to a learning and assessment environment where access to normal production operations is not available . A typical environment will be for application in a VET in Schools delivery environment or other simulated or trial manufacturing environment where a high degree of supervision exists.

The unit applies to the construction of a cloth item that does not require complex sewing or finishing or the development of a pattern. Typical items include tablecloths, hats, towels, cushions, BBQ covers, place mats, cloth bags, scarves, wall hangings, external awnings, and cloth pencil or tool cases.

The unit should be regarded as an integrating unit which has application in Certificate I and II qualifications that act as general introductory qualifications to manufacturing industry. It should be applied to a specific 'project' or task which has a defined beginning, middle and end, occurs over an extended period of time, and is reflective of clothing manufacturing industry and/or organisation.

When delivered and assessed as part of a qualification the unit should be customised to ensure its relevance to a real or simulated work activity and related workplaces and must be delivered and assessed over a period of time.


Elements and Performance Criteria

ELEMENT

PERFORMANCE CRITERIA

1. Identify job requirements

1.1. Job requirements for making the object from cloth are identified from work instructions

1.2. Instructions for designing and sequencing of work are considered

1.3. Particular measurements or adjustments are interpreted and mapped out

1.4. OH&S requirements are considered, planned for and observed

2. Prepare for work

2.1. Suitable work area is selected for the task

2.2. Appropriate tools, equipment and materials are selected

2.3. Potential hazards are identified from observation of the tools, equipment, materials

2.4. Required tools and materials are laid out in sequence according to job requirements and work instructions

2.5. Equipment, if required, is checked and adjusted in accordance with workplace procedure

3. Create work

3.1. Fabric is measured, cut and laid out according to specifications

3.2. Fabric is secured or sewed according to quality requirements

3.3. Work is checked against patterns and work sheets at the identified checkpoints

3.4. Non-conformity with the required pattern or quality standard is rectified.

4. Complete work

4.1. Completed work is checked against required quality standards

4.2. Documentation is completed following workplace reporting procedures

4.3. Work area is cleaned, tools and equipment are returned to storage

4.4. Unused materials are returned to storage and waste and scrap are dealt with following workplace procedures

Required Skills

Required skills

collect, organize and understand information related to basic plans and safety procedures

coordinate work

plan and organise activities

work with others

the ability to ask for limitations and ask for help where needed; and

use mathematical ideas and techniques to correctly complete measurements and calculate areas and estimated materials requirement

Required knowledge

workplace procedures and work instructions

organisational structure

evaluation and review procedures;

creative thinking techniques.

Evidence Required

The Evidence Guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.

What critical aspects of evidence are required to demonstrate competency in this unit?

identify appropriate materials for use in making cloth items, and any special sewing or handling requirements for those materials.

apply safe operating and handling practices for equipment, products and materials.

interpret work order and locate and apply relevant information.

use patterns select and use tools and equipment appropriate to the task.

follow work instructions, operating procedures and inspection practices to:

prevent damage to goods, equipment or products

maintain required production output and product quality

minimise the risk of injury to self or others.

work effectively with others.

modify activities to cater for variations in workplace contexts and environment.

report process or materials faults, damaged products or equipment.

Assessment must confirm appropriate knowledge and skills to:

follow workplace procedures for hazard identification and risk control

use relevant personal protective clothing and equipment

communicate effectively with others as required when following safety procedures

Performance is demonstrated consistently over a period of time and in a suitable range of contexts

Consistently applies required knowledge and skills when completing workplace hazard prevention tasks and following relevant procedures:

Consistently shows evidence of application of relevant workplace procedures, policies, instructions and regulations, including:

OHS regulations and hazard prevention policies and procedures

relevant manufacturer's guidelines relating to the operation and use of equipment

Action is taken promptly to report and/or rectify any safety incidents in accordance with workplace procedures

Recognises and adapts appropriately to cultural differences in the workplace, including modes of behaviour and interactions among staff and others

Work is completed systematically with required attention to detail without damage to goods, equipment or personnel

Context of assessment

Assessment may occur on the job or in a workplace simulated facility with relevant equipment, materials, and work instructions and specifications.

Assessment of this unit must be carried out or managed by a registered training organisation:

Assessment of knowledge must be conducted through appropriate written/oral examinations

Appropriate practical assessment must occur:

in suitable simulations of a work environment organised by the registered training organisation, and/or

in an appropriate workplace

Specific resources required for assessment

Access is required to opportunities and appropriate resources to either:

carry out a range of suitably simulated practical and knowledge assessments that demonstrate the skills and knowledge to work safely (usually as part of a holistic assessment involving other competency units), and/or

participate in actual workplace activities that demonstrate the skills and knowledge to work safely


Range Statement

The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.

What does an object from cloth include?

An object from cloth is a cloth item that does not require sewing of complex shapes or finishing or the development of a pattern and may include:

basic cushions

soft tableware such as placemats or serviettes

basic clothing such as a scarf, simple cloth hat not requiring blocking or a circle skirt,

a basic carry bag

handkerchief

tea towel

wall hanging

pencil case

What are the work instructions?

Work instructions may include:

job sheets including number and type of objects to be produced

patterns for making an object from cloth

plans

drawings and sketches

operating instructions for equipment including safety procedures

designer instructions

quality requirements

verbal directions from a supervisor or instructor

What do OH&S requirements include?

OH&S requirements may include:

legislation

regulations

material handling instructions including hazardous and dangerous goods codes

local safe operating procedures

specific workplace rules and regulations regarding personal protective wear and equipment

What is a suitable work area?

A suitable work area may include:

a bench top or desk

a sewing or layout table

a sewing table with a sewing machine

What are tools, equipment and materials?

Tools and equipment may include:

measuring equipment such as tapes and rulers

calculating equipment such as calculators and computers

general cutting and sewing tools including scissors, drills, sewing machines, hemming machines, glue guns

personal protection equipment

Materials may include:

plain and patterned fabric

velvet

threads

wadding

foam

tape

fasteners including buttons and hooks

What are potential hazards?

Potential hazards may include broken or faulty equipment, damaged needles, a lack of lighting, untidy working conditions, wet or slippery floors, improperly secured sewing machines, damaged or frayed electrical cables and connections,

What are reporting procedures?

Workplace reporting procedures may include:

completing necessary paperwork

communicating with a supervisor or key person that you are completed with the task

reporting, accidents, injuries and faulty equipment or materials

filing necessary paperwork


Sectors

Unit sector

Manufacturing Pathways


Employability Skills

This unit contains employability skills.


Licensing Information

Not applicable.