Elements

Performance Criteria

Elements describe the essential outcomes.

Performance criteria describe the performance needed to demonstrate achievement of the element.

1. Prepare mould for casting

1.1 Check casting schedule, drawings and job specification

1.2 Check finish and veneer requirements for any or all faces, edges or surfaces

1.3 Prepare veneering equipment and formwork to temporarily support veneers and backing concrete

2. Prepare reinforcement

2.1 Check quantities, type, size and shape of reinforcement supplied against drawings and schedules

2.2 Place reinforcement and check concrete covers

2.3 Complete mould assembly

2.4 Insert lifting devices, lugs, fixing and other fittings according to drawings and specifications

2.5 Seal mould

3. Cast concrete

3.1 Pour concrete in correct sequence according to work schedule

3.2 Check adequate vibration

3.3 Complete casting process to plans and specification

3.4 Prepare test samples and/or cylinder as required by work instructions

3.5 Screed to a flat, accurate surface in preparation for finishing

3.6 Finish green concrete as required

3.7 Wet patch as required

4. Cure product

4.1 Cover and cure mould in accordance with standard procedure and any special requirements

4.2 Monitor curing to achieve specified stripping strength

5. Strip and store product

5.1 Safely remove mould parts at appropriate time, with care, and inspect for damage

5.2 Lift unit using appropriate lifting equipment and lifting methods

5.3 Arrange storage using protective pads to ensure against damage

6. Respond to problems

6.1 Identify routine and non-routine problems in the equipment or process

6.2 Rectify problems using appropriate solution within area of responsibility

6.3 Report problems outside area of responsibility to designated person

7. Control hazards

7.1 Identify architectural precast concrete production hazards

7.2 Assess the risks arising from those hazards

7.3 Implement measures to control those risks