This unit of competency covers the ability to apply National Instrument Test Procedures to determine whether a class of simple measures is suitable for trade and then mark it accordingly.
This unit of competency is applicable to verifiers operating under a licence to test and mark specific classes of simple measures. Simple measures such as trade masses, length measures and volume measures are used in a wide variety of commerce including retail, hospitality, pharmaceuticals and laboratory services.
Under the requirements of Regulation 2.43 of the Trade Measurement Regulations 2009, a servicing licensee or an employee must not verify a measure relevant to this unit unless they hold a statement of attainment for this unit of competency.
Elements and Performance Criteria
Elements describe the essential outcomes
Performance criteria describe the performance needed to demonstrate achievement of the element
Prepare for verification
Identify and evaluate the type of simple measure to be verified
Access and correctly interpret documentation required for the verification
Identify and access test equipment, products and consumables required for the verification
Liaise with the trader to provide the items required on site
Ensure specified test equipment is fit for purpose in accordance with applicable legislation and organisational procedures
Store and transport test equipment in accordance with organisational procedures and industry best practice
Identify relevant local workplace health and safety issues and implement appropriate control strategies
Evaluate simple measure performance
Evaluate whether the operating environment will impact on the performance of the simple measure
Modify the operating environment or implement alternative arrangements to ensure reliable test conditions as necessary
Identify the maximum permissible errors for the simple measure from the legislative requirements
Use test equipment safely in accordance with applicable legislation and organisational procedures
Check simple measure for compliance with the appropriate Certificates of Approval
Inspect simple measure in accordance with relevant National Instrument Test Procedures and appropriate National Measurement Institute (NMI) policy
Evaluate results against prescribed performance criteria and determine if the simple measure is suitable for trade use in accordance with legislative requirements
Report verification results
Display the verification result on the simple measure in accordance with legislative requirements
Use test reports to present verification results in the required format
Complete verification documentation in accordance with legislative requirements and organisational procedures
Communicate results within the specified time and in accordance with organisational guidelines
Model and encourage compliance with statutory requirements
Apply organisationâ€™s quality procedures and practices to meet servicing licenseeâ€™s legislative obligations
Clarify any issues about verifier obligations with their servicing licensee and/or licensing administering authority as they arise
Review work and seek feedback from others to confirm continuing compliance with legislative requirements
Identify implications of non-compliance with legislative requirements
Identify inadequacies in traderâ€™s use of measures which may contribute to non-compliance with national measurement legislation
Explain inadequacies and possible remedial actions to trader
Respect the rights of the trader at all times
Maintain statutory records
Keep accurate and complete records in accordance with servicing licenseeâ€™s legislative requirements
Ensure authorisation, training and relevant licences are current in accordance with organisational and servicing licenseeâ€™s legislative requirements
Inform the licensing administering authority of changes to personal information as required by statute
Evidence of Performance
Evidence of competence in this unit must satisfy all of the requirements of the elements and performance criteria, and include demonstration of:
testing and marking at least three (3) measures from one (1) or more of the following classes of simple measures:
alcoholic beverage measures
lubricating oil measures
accessing and correctly interpreting documentation required for verification of simple measures
planning, scheduling, preparing for and safely conducting a verification to optimise use of resources and minimise disruption to the public and trader
ensuring test equipment and reference standards are fit for purpose in accordance with applicable legislation and organisational procedures
checking compliance and evaluating the performance of simple measures using appropriate Certificates of Approval, National Measurement Institute (NMI) policy and National Instrument Test Procedures, and adjusting for any impact of the operating environment and operational factors
reliably determining if simple measures are suitable for trade use in accordance with legislative requirements
displaying the verification result on simple measures and completing all verification documentation in accordance with legislative requirements and organisational procedures
identifying and communicating any inadequacies in servicing licensee's organisational procedures and practices that may contribute to non-compliance with legislative requirements
maintaining the accuracy, completeness and currency of statutory records required of servicing licensees, such as authorisation, training and relevant licences
identifying and communicating any inadequacies in trader's use of simple measures which may contribute to non-compliance with national measurement legislation
demonstrating professionalism and respecting the rights of the trader at all times
using routine communication and negotiation skills to:
explain the verification purpose, procedures and outcomes to traders, verifiers and managers
inform traders of non-compliances and consequences of failing to rectify them
using numeric skills to:
perform calculations involving fractions, decimals, ratios, proportions and percentages
use correct units and the correct number of significant figures
analyse performance results over a single or limited range of operating conditions
maintaining the security and confidentiality of data in accordance with organisational and regulatory requirements
reporting results in the required formats and expected timeframe
Evidence of Knowledge
Must provide evidence that demonstrates knowledge of:
general science principles and concepts, such as weight, mass, gravity, density, heat, temperature effects and coefficients of expansion
metrological terms and terminology specific to simple measures, such as maximum permissible errors, traceability, error of measurement and error of indication
details of the design and applications for one (1) class of simple measures, the components and their function
servicing licensee requirements, including:
quality management system
maintenance of statutory records
national measurement legislation requirements for simple measures
safe work method statements (SWMS) for trading environments relevant to job role
NMI policy, National Instrument Test Procedures and operating procedures for equipment, and reference standards used in job role, including:
purpose of test, test conditions and possible environmental impacts on performance of the simple measure
key preparation/measurement steps in the test method
maximum permissible errors for simple measures being verified
organisational policy and procedures for verifying simple measures, including completion of test results, verification documents and statutory records
organisational safety procedures and requirements of applicable Commonwealth, state and territory work/occupational health and safety (WHS/OHS) legislation.
Judgement of competence must be based on holistic assessment of the evidence. Assessment methods must confirm consistency of performance over time, rather than a single assessment event.
This unit of competency should be assessed in the workplace, or a simulated workplace environment. A simulated workplace environment must reflect realistic operational workplace conditions that cover all aspects of workplace performance, including the environment, task skills, task management skills, contingency management skills and job role environment skills.
Foundation skills are integral to competent performance of the unit and should not be assessed separately. Assessment processes and techniques must be appropriate to the language, literacy and numeracy requirements of the work being performed and the needs of the candidate.
Knowledge evidence may be collected concurrently with performance evidence or through an independent process such as workbooks, written assessments or interviews (provided a record is kept in each case).
This unit of competency may be assessed with:
MSMTMREF301 Use and maintain reference standards
Holistic assessment methods include:
review of test results, verification documentation and statutory records completed by the candidate
feedback from supervisors and peers regarding the candidate's ability to verify the performance of simple measures in accordance with legislative and organisational procedures
questions to assess understanding of relevant verification procedures, servicing licensee requirements, trader obligations and remedial actions
review of candidateâ€™s responses to verification scenarios such as potential/actual non-compliances of traders and verifiers, appropriate actions, common issues and problems
observation of the candidate verifying simple measures.
Access is required to simple measures, equipment, materials, workplace documentation, procedures and specifications associated with this unit, including, but not limited to:
latest versions of appropriate documentation, such as Certificates of Verification and Approval, NMI policy, National Instrument Test Procedures for verifying simple measures and relevant legislation
equipment manuals, material safety data sheets (MSDS), safety procedures and safety equipment
records, such as test reports, audit reports, simple measure history and test results
simple measures, test equipment and reference standards
computer and relevant software and/or organisation information management system.
Assessors must satisfy the assessor competency requirements that are in place at the time of the assessment as set by the VET regulator.
The assessor must demonstrate both technical competency and currency.
Technical competence can be demonstrated through:
relevant VET or other qualification/Statement of Attainment AND/OR
relevant workplace experience in trade measurement at least to the level being assessed and broad industry knowledge (such as a relevant industry qualification).
Currency can be demonstrated through:
performing the competency being assessed as part of current employment in trade measurement OR
having consulted with trade measurement inspectors and/or verifiers performing the competency being assessed within the last twelve months.
This section describes those language, literacy, numeracy and employment skills that are essential to performance.
Foundation skills essential to performance are explicit in the performance criteria of this unit of competency.
This field allows for different work environments and conditions that may affect performance. Essential operating conditions that may be present (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) are included.
National Instrument Test Procedures include one or more of:
measuring instrument test procedures
any other test procedure prescribed by the NMI
Classes of simple measures include one or more of:
alcoholic beverage measures
lubricating oil measures
any other simple measure prescribed by the NMI
Test equipment includes:
reference standards of measurement
equipment, such as weighing instruments, strikes and funnels
Certificates of Approvalinclude:
any Certificate issued by the Chief Metrologist under Regulation 60 of the National Measurement Regulations approving the pattern of a simple measure as being suitable for trade
Prescribed performance criteria for simple measures include:
that the instrument is of an approved pattern
that the instrument operates within the appropriate limits of error permitted by legislation
that the instrument is used in accordance with any legislative requirements
Has the same meaning as Section 18GG of the National Measurement Act 1960
Verification marks for different instruments are defined in Sections 2.28 and 2.29 of the National Trade Measurement Regulations
Trading practices include one or more of:
methods used for the sale of goods
using measuring instruments
position of measuring instruments
suitability of instrument
Enforcement actions include one or more of:
formal warnings, infringement notices, undertakings, injunction and prosecutions
national measurement legislation
applicable Commonwealth, state and territory work/occupational health and safety (WHS/OHS) legislation
NMI policy includes:
test procedure variations between a verification, in-service or audit inspection
WHS/OHS and environmental management requirements include:
complying with WHS/OHS and environmental management requirements at all times, which may be imposed through state/territory or federal legislation. These requirements must not be compromised at any time
Â· applying standard precautions relating to the potentially hazardous nature of samples
accessing and applying current industry understanding of infection control issued by the National Health and Medical Research Council (NHMRC) and State and Territory Departments of Health, where relevant