1

Prepare for site inspection

1.1

Obtain and use maps, photos and related documentation to gain a preliminary understanding of site features

1.2

Collect site-specific or regional data on expected flora, fauna, soils and climate

1.3

Review site history and previous environmental or ecological studies, if available

1.4

Review all emergency plans, risk assessments, and safety and environmental management requirements associated with the field activities

1.5

Review legislative and planning instruments applicable to current and future site usage

1.6

Confirm site access requirements and identify potential site hazards

2

Conduct initial site survey

2.1

Sketch, map and/or photograph the site

2.2

Observe and record the surface geology and geomorphology of the site

2.3

Observe and record hydrology of the site

2.4

Observe and record the major flora of the site

2.5

Observe and record evidence of site fauna

2.6

Observe and record infrastructure and other modifications to the site

2.7

Consider the potential for presence of cultural and indigenous heritage items and record, as necessary

2.8

Check for evidence of illegal or inappropriate activities

3

Make an initial assessment of site condition

3.1

Use geomorphological and hydrological observations to describe surface condition and infer potential future impacts

3.2

Make inferences on apparent ecological health of the site to plan for an initial ecological study of the site

3.3

Determine the physical, chemical and biological parameters that would need to be measured and/or sampled during subsequent ecological appraisal of the site

4

Prepare for field study

4.1

Identify and describe the biological and chemical components of interest, sampling areas and field techniques to be used

4.2

Identify, obtain and check required equipment and materials required for field study

4.3

Securely stow all field equipment in vehicle to prevent damage in transit

4.4

Safely transport all field equipment to site and prepare it for use

5

Perform a basic ecological field study of the site

5.1

Perform ecological sampling for abundance and diversity parameters using the general techniques of transects and quadrats

5.2

Record appropriate descriptions of the habitat structure

5.3

Perform sampling for simple population, demographic and age structure parameters

5.4

Perform simple sampling and measurements on abiotic components

5.5

Perform simple targeted species sampling

5.6

Ensure compliance with relevant legislation, policy, codes of practice and accepted enterprise procedures

6

Finalise field study

6.1

Ensure all samples and data are stored safely

6.2

Rehabilitate sampling sites to render them safe and minimise environmental impacts

6.3

Clean all equipment, containers, work area and vehicles according to enterprise procedures

6.4

Pack and safely transport all samples, equipment and supplies back to home base

6.5

Ensure dispatch of collected samples for subsequent analysis, as necessary

6.6

Check serviceability of all equipment before storage

7

Process and present field data

7.1

Summarise field data using simple calculations, graphs, tables and/or maps

7.2

Provide reports that include simple conclusions and interpretations based on raw or summarised data

8

Maintain a safe work environment

8.1

Use defined safe work practices and personal protective equipment to ensure personal safety and that of others

8.2

Minimise the generation of waste

8.3

Ensure the safe collection of all hazardous wastes for appropriate disposal

Required skills

Required skills include:

site observational skills, including the ability to ‘step back’, question and interpret those observations

researching and summarising existing data and reports

communicating effectively

planning and preparing for field activities

field sampling and monitoring procedures, including labelling and traceability

demonstrating correct and safe use of field instruments and/or equipment under laboratory and field conditions, including field calibration

identifying and rectifying basic instrument faults

writing/compiling concise and accurate reports

responding effectively to changed or unforeseen circumstances

seeking advice when issues/problems are beyond scope of competence/responsibility

working safely for the protection of self and others

Required knowledge

Required knowledge includes:

scientific terminology for environmental and ecological systems relevant to job role

the structure of earth systems, including lithosphere, hydrosphere, atmosphere and biosphere (ecosphere)

key concepts and principles of geomorphology, climate and hydrology

fundamental concepts and principles in chemistry, physics, geology and biology to support a scientific approach to basic field ecology

energy and material flows and cycles, including biogeochemical cycles

the fundamentals of ecology, including:

ecosphere, biome and major ecosystem types

trophic structure of ecosystems, and hierarchies

organism, population, community, ecosystem hierarchy; habitat and biodiversity

abiotic and biotic components and their interrelationships and dependencies

ecological systems and dynamics; stability, succession and disruption

specific legislation, policies and codes of practice related to ecological field activities

ecological, chemical and physical field monitoring procedures relevant to job role

procedures for maintaining, storing and transporting samples/specimens to ensure their wellbeing, viability and integrity

relevant health, safety and environment requirements, including field safety/survival principles

Overview of assessment

Competency must be demonstrated in the ability to perform consistently at the required standard.

Critical aspects for assessment and evidence required to demonstrate competency in this unit

Assessors must be satisfied that the candidate can competently and consistently apply the skills covered in this unit of competency in new and different situations and contexts. Critical aspects of assessment and evidence include:

applying relevant aspects of environmental legislative and planning framework to site appraisal

researching, reviewing and summarising site environmental history

identifying key aspects of emergency, safety or environmental management plans that relate to a defined field activity

applying a working knowledge of relevant terminology, concepts and principles in geology, geomorphology, hydrology and ecology to provide a scientific, systematic appraisal of site environmental condition

planning and performing an ecological study and obtaining relevant, reliable data

demonstrating correct use of field instruments and/or equipment under laboratory and field conditions, including field calibration

applying sampling, testing and data quality procedures to accurately perform field tests

recording and reporting appraisal of site condition

working safely.

Context of and specific resources for assessment

This unit of competency is to be assessed in the workplace or a simulated workplace environment.

Assessment should emphasise a workplace context and procedures found in the candidate’s workplace.

This unit of competency may be assessed with:

MSL974007A Undertake environmental field-based monitoring

field-based environmental monitoring units, such as:
MSS024009A Assist with assessing and monitoring stormwater systems or MSS025013A Assist with assessing and monitoring wetlands

MSS024004A Process and present environmental data.

The competencies covered by this unit would be demonstrated by an individual working alone or as part of a team.

Resources may include:

access to suitable sites and a vehicle

vehicles, survey equipment, sampling/monitoring equipment, cameras, consumables and manuals

work program, enterprise procedures, codes of practice and field protocols

information, such as maps and flora/fauna keys.

Method of assessment

The following assessment methods are suggested:

review of data, results and site reports prepared by the candidate

feedback from peers and supervisors that the candidate consistently follows enterprise procedures, survey, sampling/measurement methods, and works safely

oral/written questioning associated with appraisal of environmental site condition

observation of the candidate conducting site appraisals

review of records completed by the candidate.

In all cases, practical assessment should be supported by questions to assess underpinning knowledge and those aspects of competency which are difficult to assess directly.

Where applicable, reasonable adjustment must be made to work environments and training situations to accommodate ethnicity, age, gender, demographics and disability.

The language, literacy and numeracy demands of assessment should not be greater than those required to undertake the unit of competency in a work-like environment.

Guidance information for assessment

Codes of practice

Where reference is made to industry codes of practice, and/or Australian/international standards, it is expected the latest version will be used

Legislation, standards, codes, procedures and/or enterprise requirements

Legislation, standards, codes, procedures and/or enterprise requirements may include:

federal legislation, such as:

Environment Protection and Biodiversity Conservation Act 1999

state/territory government legislation and regulations and local government by-laws, policies, and plans dealing with:

land use, acquisition, planning and protection

environmental protection

cultural/heritage protection

vegetation management

nature conservation, wildlife/plant protection, prevention of cruelty to animals and quarantine

water and water management

soil conservation

pollution and contaminated sites

fisheries, forestry and mining operations

codes of practice dealing with the care and use of animals for scientific purposes

national environment protection measures

government policy (e.g. sustainable development and impact assessment)

Australian and international standards, such as:

AS ISO 14050:1999 Environmental management - Vocabulary

AS/NZS ISO 14000 Basic Set:2007 Environmental management basic set

AS/NZS 2031:2001 Selection of containers and preservation of water samples for microbiological analysis

AS 1726:1993 Geotechnical site investigations

enterprise sampling and monitoring protocols

equipment manuals and warranties, supplier catalogue and handbooks

material safety data sheets (MSDS)

occupational health and safety (OHS) national standards and codes of practice

site-specific requirements

specific environmental standards

Ecological principles and concepts

Ecological principles and concepts may include:

ecosphere, biome and major ecosystem types

ecological niche and biogeography

trophic dynamics, autotrophs, heterotrophs and detrivores, and food webs

distribution and abundance of organisms, populations and communities, and biodiversity

abiotic and biotic components and their interrelationships and dependencies

energy and material flows and cycles, including biogeochemical cycles

population ecology:

distribution, abundance and dispersion

growth rates and age structures

migration and dispersal in space and time

behavioural ecology (communication and learning, aggression and territoriality, and social group dynamics)

community ecology (ecological interactions):

intra/interspecific competition

concepts of coexistence, adaptive and competitive, including mimicry, coevolution, parasitism, mutualism, commensalism and predator/prey systems

species diversity in time and space

Earth science principles and concepts

Earth science principles and concepts may include:

geology:

earth structure and plate tectonics

classification of rocks (e.g. igneous, sedimentary, volcanic and stratigraphy)

weathering

geomorphology:

erosion and mass wasting

transportation and deposition, and sedimentation

fluvial, aeolian, hillslope and weathering processes

soil science:

soil classification

soil formation and soil profiles

pedology

edapology

Hydrolgical principles and concepts

Hydrolgical principles and concepts may include:

the hydrologic cycle:

run-off

infiltration

subsurface flow

water quality

ecohydrology

hydrogeology

water resources

hydrologic measurement:

surface flows (stream gauging)

groundwater (infiltration and flow)

precipitation and evaporation

Enterprise procedures for field activities

Enterprise procedures for field activities may include:

field notebooks or log books

standard operating procedures covering fieldwork, sampling and testing

equipment operating manuals, calibration procedures, instrument fault-finding procedures and general maintenance and repair procedures

emergency, first aid and survival procedures

requirements related to protection of the environment

incident/accident/injury report forms

Equipment

Equipment may include:

navigation and communication equipment (e.g. compass, maps, global positioning system (GPS), two-way radio and mobile phone)

survey equipment

sampling equipment and containers, and animal cages

parameter specific meter or multi-probes (e.g. dissolved oxygen, electrical conductivity, pH, turbidity, nitrates, phosphates and temperature)

field test kits to determine such parameters as dissolved gases, chemical anions and cations, heavy metals, E. coli and biological oxygen demand (BOD)

portable colourimeters and field microscopes

filters and sieves

soil monitoring kits

data loggers

first aid equipment

Field monitoring activities and skills

Field monitoring activities and skills may include:

sample collection, preservation, labelling, storage, and transportation according to enterprise procedures

correct use and calibration of field instruments according to written instructions

correct and accurate performance of field tests for specific parameters

clear and accurate recording of data

safe operation of motor vehicles and boats

Hazards

Hazards may include:

solar radiation, dust and noise

personnel getting lost

accidents, emergencies and incidents, such as snake, insect or animal bites

exposure to severe weather conditions

manual handling of heavy objects

vehicle and boat handling in rough/remote conditions

OHS and environmental management requirements

OHS and environmental management requirements:

all operations must comply with enterprise OHS and environmental management requirements, which may be imposed through state/territory or federal legislation - these requirements must not be compromised at any time

all operations assume the potentially hazardous nature of samples and require standard precautions to be applied

where relevant, users should access and apply current industry understanding of infection control issued by the National Health and Medical Research Council (NHMRC) and State and Territory Departments of Health