Application
This unit of competency covers the skills and knowledge required to set up, operate and monitor one type of machine used in a range of textile production operations.
The unit of competency applies to a limited range of machine skills on one machine or machine type and to undertaking operational support tasks directly related to the manufacture of textiles. It provides the skills and knowledge required to work under supervision within a production environment. The unit applies to breadth and depth of knowledge of machine production in a defined range of situations in a support role. It includes skills to solve a defined range of problems by applying known solutions.
The application of the unit of competency and the evidence requirements may focus on one or more industry sectors, workplace contexts and machine types and will be determined by operational conditions and production requirements.
Work is conducted according to defined procedures. Work may be conducted in small to large scale enterprises and may involve individual and team related activities.
No licensing, legislative or certification requirements apply to this unit at the time of publication.
Elements and Performance Criteria
Elements describe the essential outcomes. | Performance criteria describe the performance needed to demonstrate achievement of the element. | ||
1 | Determine job requirements | 1.1 | Follow standard operating procedures (SOPs) |
1.2 | Comply with work health and safety (WHS) requirements at all times | ||
1.3 | Use appropriate personal protective equipment (PPE) in accordance with SOPs | ||
1.4 | Identify job requirements from specifications, drawings, job sheets or work instructions | ||
2 | Prepare to operate one type of TCF machine | 2.1 | Check specifications to identify materials and process required |
2.2 | Identify machine processes and operational stages | ||
2.3 | Calculate and adjust machine settings to meet requirements for production | ||
2.4 | Identify and undertake preliminary operations, as required, and follow required procedures to prepare materials and equipment | ||
2.5 | Load materials for processing according to machine requirements and manufacturer specifications | ||
2.6 | Keep machine and components, and area around machine clean during preparation and loading and apply relevant WHS practices | ||
2.7 | Check machine safety equipment, and identify and recognise risks and potential hazards | ||
3 | Operate and monitor one type of machine | 3.1 | Start, operate, stop, re-start and monitor machine operations in accordance with manufacturer requirements to produce textile material or product |
3.2 | Monitor and coordinate materials according to enterprise procedures | ||
3.3 | Sort waste and clean machine according to enterprise procedures | ||
3.4 | Identify and report minor faults in materials, process and machine, where necessary, to maintain quality standards | ||
3.5 | Check machine in the event of stoppage and follow procedures for re-starting machine | ||
3.6 | Report major machine or product faults | ||
4 | Complete and finalise operations | 4.1 | Unload or remove textile material or product according to manufacturer specifications and workplace procedures |
4.2 | Check output of machine or product against quality specifications, identify and rectify routine faults or non-conformance and report according to workplace procedures | ||
4.3 | Despatch product to next process according to production sequence | ||
4.4 | Complete production records and other documentation, according to workplace procedures |
Evidence of Performance
Evidence required to demonstrate competence in this unit must be relevant to and satisfy the requirements of the elements and performance criteria and include:
reading and following work instructions, standard operating procedures (SOPs), safe work practices
applying relevant standards
checking specifications for production and following workplace procedures
identifying and undertaking preliminary operations according to enterprise requirements, and following required procedures to prepare materials and equipment for operations
checking machine safety equipment, recognising risks and potential hazards, and reporting any faults
loading and unloading materials according to machine and workplace procedures
starting, operating, stopping, re-starting and monitoring machine operations in accordance with manufacturer requirements
monitoring machine operations, coordinating materials, sorting waste and cleaning machine according to enterprise procedures
identifying and reporting minor faults in materials, process and machine that may impact on machine operation or product quality
reporting major machine or product faults
operating at least one (1) machine or machine type to provide intermediate production support in accordance with manufacturer requirements, to produce textile material or product, on at least two (2) occasions
checking output and identifying and reporting routine machine or product faults or problems, to meet quality standards
despatching product to next process according to production sequence and following operations
applying workplace procedures
maintaining accurate records.
Evidence of Knowledge
Evidence must be provided that demonstrates knowledge of:
safe work practices and procedures and use of personal protective equipment (PPE)
relevant Australian Standards
at least one machine or machine type associated with textile production in an identified context, and the type of product they produce. Machine type may be selected from those listed in the following groups:
machines for knitting:
circular knitting machines
electronic and automatic flat knitting machines
machines for spinning:
spinning machines
drawing machines
roving machines
twisting machines
winding machines
carding machines:
burr handling systems
air filtration equipment
combs
doffer waste system
blending systems
compressed air and hydraulic systems
tufting looms:
winding machines
finishing equipment
other ancillary equipment
weaving machines:
weaving looms
broadloom
narrowloom
all shuttle types
Jacquard looms
microprocessor or computer controlled looms
dyeing machines
finishing machines
procedures and guidelines for safe operation of machine
material or product requirements for the machine operation
operational sequence of machine and stages of operation
textiles and products produced by textile production machines:
fibres, including polyester, cotton, wool, viscose and rayon
yarns, including ring spun, open-ended spun, air jet spun and friction spun
fabrics
finished products of the identified machine type, for example socks, sweaters, towels, sheets, blankets, carpets, rope and twine, mops and industrial textiles
typical fault conditions and related fault-finding procedures
details of materials and processes associated with preparing the machine type for production
types and characteristics of fibres, threads, yarns and other materials required for textile operations
characteristics of quality and substandard products
machine maintenance and repair techniques
procedures for checking, reporting and re-starting after stoppage
finishing processes
technical specifications manuals
quality standards and practices
standards for clean and tidy working environment
work health and safety (WHS) hazards and risks
appropriate handling of waste
workplace procedures
recording and reporting practices.
Assessment Conditions
Assessors must:
satisfy the assessor competency requirements that are in place at the time of the assessment, as set by the VET regulator
have vocational competency in operating a machine for intermediate production support, at least to the level being assessed, with relevant industry knowledge and experience.
Assessment should occur in operational workplace situations. Where this is not possible, or where personal safety or environmental damage are limiting factors, assessment must occur in a sufficiently rigorous simulated environment reflecting realistic operational workplace conditions. This must cover all aspects of workplace performance, including environment, task skills, task management skills, contingency management skills and job role environment skills.
Assessment processes and techniques must be appropriate to the language, literacy and numeracy requirements of the work being performed and the needs of the candidate.
Conditions for assessment must include access to all tools, equipment, materials and documentation required, including relevant workplace procedures, product and manufacturing specifications associated with this unit.
Assessment may relate to an identified sector, enterprise, process or machine type and function, according to job role.
Foundation Skills
This section describes those required skills (language, literacy and numeracy) that are essential to performance.
Foundation skills essential to performance are explicit in the performance criteria of this unit of competency.
Range Statement
This field allows for different work environments and conditions that may affect performance. Essential operating conditions that may be present (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) are included. | |
Workplace procedures include one or more of the following: | requirements prescribed by legislation, awards, agreements and conditions of employment SOPs work instructions PPE oral, written and visual communication quality practices, including responsibility for maintenance of own work quality and contribution to quality improvement of team or section output housekeeping tasks related to environmental protection, waste disposal, pollution control and recycling WHS practices |
Australian Standards include: | the relevant industry or Australian Standards that are current at the time this unit is being undertaken |
Monitor and coordinate materials according to enterprise procedures may include but is not limited to: | sorting waste and cleaning area to ensure work environment is maintained in a safe productive manner |
WHS practices | WHS practices must include hazard identification and control, risk assessment and implementation of risk reduction measures specific to the tasks described by this unit, and include one or more of the following: hazard identification induction training hazard control risk assessment implementing risk reduction measures specific to the tasks manual handling techniques SOPs PPE safe materials handling taking of rest breaks ergonomic conditions of workplace following marked walkways safe storage of equipment housekeeping to keep work area safe reporting accidents and incidents environmental practices safe disposal of chemical and hazardous substances |
Sectors
Not applicable
Competency Field
Textile production