Application
This unit of competency describes the skills required to plan, prepare and conduct an inspection of gravity sewer or stormwater conduits, using specialised CCTV camera and transport systems, and reporting on observed defects and other features of the conduit in accordance with the industry code and job specifications. The ability to interpret technical information, identify and assess hazards, operate and maintain specialised technical equipment and to produce computer generated reports on the condition and features of the conduit inspected is essential to performance.
This unit applies to those working as operators with a specific responsibility for inspecting and reporting on the condition of operational gravity sewers and stormwater conduits and new or rehabilitated sewers or stormwater conduits; and operating and maintaining specialised CCTV inspection equipment. This unit may also be applied to the inspection of other types of conduit system.
The skills and knowledge described in this unit must be applied within the legislative, regulatory and policy environment in which they are carried out. Organisational policies and procedures must be consulted and adhered to, particularly those related to WHS and manufacturer specifications.
Those undertaking this unit would work under indirect supervision, while performing routine tasks in a familiar context, ensuring minimum damage to the environment.
No licensing, legislative or certification requirements apply to unit at the time of publication.
Elements and Performance Criteria
ELEMENTS | PERFORMANCE CRITERIA |
Elements describe the essential outcomes | Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold italicised text is used, further information is detailed in the range of conditions section. |
1. Plan and prepare for conduit inspection | 1.1 Identify the purpose of the inspection and the location, size, type and extent of the conduit assets. 1.2 Determine the inspection method and equipment to be used. 1.3 Conduct and document hazard identification and risk assessment and implement appropriate risk control processes. 1.4 Establish and implement asset isolation, flow management plans and inspection schedules in consultation with the system operator. 1.5 Arrange for preparation of the conduit and site for inspection. |
2. Operate and maintain equipment | 2.1 Set up, calibrate and operate equipment to suit the size, type and conditions of conduit according to relevant industry codes and specifications. 2.2 Examine, record and report features of the conduit. 2.3 Conduct routine maintenance of equipment. 2.4 Diagnose and correct equipment malfunction. 2.5 Recognise and respond to potential risks to equipment and/or system operation. |
3. Identify and code defects and other features observed during conduit inspection | 3.1 Identify and code structural defects, service conditions and other features of the conduit. 3.2 Record asset and inspection data using approved data capture software. 3.3 Investigate and report unrecognisable defects, service conditions or other features. 3.4 Identify a conduit at risk of imminent failure and communicate details to the system operator or owner. 3.5 Identify and report defects or malfunctions of access structures. |
4. Withdraw inspection equipment and reinstate system operation | 4.1 Clean and inspect equipment for damage during and after withdrawal from the conduit. 4.2 Reinstate system operation according to asset isolation, flow management plan and specifications. 4.3 Restore work site to meet organisational, safety, environmental, and property owner requirements. |
5. Review, record and report work | 5.1 Check inspection data and video records prior to removal of equipment for completeness, quality and accuracy. 5.2 Compile conduit inspection reports and present to the client in the required format. 5.3 Complete job documentation and communication according to asset owner or operator and statutory requirements. |
Evidence of Performance
Evidence required to demonstrate competence must satisfy all of the requirements of the elements and performance criteria. If not otherwise specified the candidate must demonstrate evidence of performance of the following on at least one occasion.
identifying structural defects, service conditions and other features in a range of different conduits
applying industry inspection reporting code requirements
using data capture software
operating CCTV camera controls and recording systems
accessing and interpreting GIS data, interpreting plans, maps, house service diagrams, instructions, specifications and standard operating procedures
using safety equipment and personal protective equipment
using tools and instruments associated with camera/transport operation, maintenance and calibration
planning, preparing and conducting an inspection of gravity sewer or stormwater conduits
preparing for conduit inspection
identifying the location and extent of the work, methods to be applied, and equipment, including safety equipment, to be used
assessing risks and preparing for hazards
implementing appropriate isolation and inspection procedures
calibrating equipment for conduit inspection
operating and maintaining equipment
conducting inspections and identifying and coding conduit defects and condition
recording data manually, or using approved software program
investigating and recording anomalies
reporting conduit at risk of failure
removing equipment and reinstating system operation
restoring worksite
completing and processing inspection information according to organisational procedures
Evidence of Knowledge
Evidence required to demonstrate competence must satisfy all of the requirements of the elements and performance criteria. If not otherwise specified the depth of knowledge demonstrated must be appropriate to the job context of the candidate.
industry inspection reporting code
data capture, recording and reporting software
WHS
confined space entry procedures
typical traffic control arrangements
potential hazards and risk factors of operational processes
equipment operation
techniques of operation in unusual situations
capabilities of camera, lights and transport system
routine maintenance and calibration requirements of camera, lights and transport system
effects of weather and conditions on operation of site or plant
environmental aspects of operation and installation
features of conduits used in Australia for gravity sewer and stormwater construction over the last 100 years
construction and operation of sewerage and stormwater systems
Assessment Conditions
Competency should be assessed in an actual workplace or in a simulated environment, with access to equipment and infrastructure appropriate to the outcome. Competency should be demonstrated over time to ensure the candidate is assessed across a variety of situations.
Assessors must satisfy the NVR/AQTF mandatory competency requirements for assessors.
Foundation Skills
The foundation skills demands of this unit have been mapped for alignment with the Australian Core Skills Framework (ACSF). The following tables outline the performance levels indicated for successful attainment of the unit.
Further information on ACSF and the foundation skills underpinning this unit can be found in the Foundation Skills Guide on the GSA website.
Competency Field
Networks