Application
This unit of competency covers the skills and knowledge required to operate equipment used to convey and load bulk solids in sealed containments.
This unit of competency applies to an operator who is required to undertake pre-start checks, operate filling, loading and supplementary equipment to meet specifications, and undertake minor maintenance.
This unit of competency applies to an individual working alone or as part of a team or group and working in liaison with other shift team members and the control room operator, as appropriate.
This unit of competency has been written with minerals processing plants as the specific focus. However, it can also be applied with appropriate contextualisation to any plant in which raw product is produced for transporting for further processing, such as in the manufacture of plastics or other particulates.
This unit of competency does not apply to line conveyors as part of a ship loading system.
No licensing, legislative or certification requirements apply to this unit at the time of publication.
Elements and Performance Criteria
Elements describe the essential outcomes. | Performance criteria describe the performance needed to demonstrate achievement of the element. | ||
1 | Prepare for work | 1.1 | Receive and give shift handover |
1.2 | Identify work requirements | ||
1.3 | Identify and control hazards | ||
1.4 | Coordinate with appropriate personnel | ||
1.5 | Check for recent work undertaken on plant item | ||
1.6 | Note any outstanding/incomplete work | ||
1.7 | Check operational status of bulk solids loading equipment | ||
2 | Manage bulk material storage and operate load-out equipment | 2.1 | Visually inspect storage facility and load-out equipment |
2.2 | Determine levels of solids in storage using appropriate indicators | ||
2.3 | Ensure storage discharge areas are free from obstructions | ||
2.4 | Identify the types of load-out equipment and duty | ||
2.5 | Operate load-out equipment in accordance with procedures | ||
2.6 | Complete routine checks, logs and paperwork taking appropriate action on unexpected readings | ||
2.7 | Ensure containment is properly sealed according to procedures after load-out | ||
2.8 | Move containment to transhipment area | ||
3 | Recognise problems and take appropriate action | 3.1 | Monitor plant frequently and critically throughout shift using measured/indicated data and senses |
3.2 | Identify impacts of any changes upstream and downstream | ||
3.3 | Recognise situations which may require action | ||
3.4 | Resolve routine problems | ||
3.5 | Take actions on other abnormal situations to make safe and have the situation resolved | ||
4 | Isolate and de-isolate bulk solids loading equipment | 4.1 | Complete any required prestart checks |
4.2 | Start up/shut down bulk solids loading equipment, and its components according to the equipment type and duty in liaison with other personnel | ||
4.3 | Isolate bulk solids loading equipment, and its components | ||
4.4 | Make safe for required work | ||
4.5 | Check bulk solids loading equipment, and its components is ready to be returned to service | ||
4.6 | De-isolate and prepare equipment for return to service | ||
Evidence of Performance
Evidence required to demonstrate competence in this unit must be relevant to and satisfy the requirements of the elements and performance criteria, and include the ability to:
operate bulk solids loading equipment
recognise early warning signs of equipment/processes needing attention or with potential problems
determine the most likely cause of routine problems
take appropriate action to ensure a timely return to full performance
isolate and de-isolate equipment
identify hazards and apply hazard control procedures.
Evidence of Knowledge
Evidence must be provided that demonstrates knowledge of:
types, application and principles of operation of load-out equipment
process parameters and limits
routine problems, faults and their symptoms and the corrective action to be taken
relevant alarms and actions
hierarchy of control
hazards that may arise in the job/work environment, and:
their possible causes
potential consequences
appropriate risk controls.
Assessment Conditions
The unit should be assessed holistically and the judgement of competence based on a holistic assessment of the
The collection of performance evidence:
should occur over a range of situations which include typical disruptions to normal, smooth operation of an operating plant
will typically include a supervisor/third-party report or other evidence, focusing on consistent performance and problem recognition and solving. A supervisor/third-party report must be prepared by someone who has a direct, relevant, current relationship with the person being assessed and who is in a position to form a judgement on workplace performance relevant to the unit of competency
must include the use of an appropriate industrial item of equipment requiring demonstration of operation, start-up and shutdown procedures and responding to problems
may use industry-based simulation for part only of the unit where safety, lack of opportunity or significant cost is an issue.
Assessment should occur in operational workplace situations. Where this is not possible, or where personal safety or environmental damage are limiting factors, assessment must occur in a sufficiently rigorous simulated environment reflecting realistic operational workplace conditions. This must cover all aspects of workplace performance, including environment, task skills, task management skills, contingency management skills and job role environment skills.
Assessment in a simulated environment should use evidence collected from one or more of:
walk-throughs
pilot plant operation
demonstration of skills
industry-based case studies/scenarios
‘what ifs’.
Knowledge evidence may be collected concurrently with performance evidence (provided a record is kept) or through an independent process, such as workbooks, written assessments or interviews (provided a record is kept).
Assessment processes and techniques must be appropriate to the language, literacy and numeracy requirements of the work being performed and the needs of the candidate.
Conditions for assessment must include access to all tools, equipment, materials and documentation required, including relevant workplace procedures, product and manufacturing specifications associated with this unit.
The regulatory framework will be reflected in workplace policies and procedures and is not required to be independently assessed.
Foundation skills are integral to competent performance of the unit and should not be assessed separately.
Assessors must satisfy the assessor competency requirements that are in place at the time of the assessment as set by the VET regulator.
In addition, the assessor or anyone acting in subject matter expert role in assessment must demonstrate both technical competency and currency. If the assessor cannot demonstrate technical competency and currency they must assess with a subject matter expert who does meet these requirements.
Technical competence can be demonstrated through one or more of:
relevant VET or other qualification/Statement of Attainment
appropriate workplace experience undertaking the type of work being assessed under routine and non-routine conditions
appropriate workplace experience supervising/evaluating the type of work being assessed under routine and non-routine conditions
Currency can be demonstrated through one or more of:
being currently employed undertaking the type of work being assessed
being employed by the organisation undertaking the type of work being assessed and having maintained currency in accordance with that organisation’s policies and procedures
having consulted/had contact with an organisation undertaking the type of work being assessed within the last twelve months, the consultation/contact being related to assessment
conducting on-the-job training/assessments of the type of work being assessed
being an active member of a relevant professional body and participating in activities relevant to the assessment of this type of work.
Foundation Skills
This section describes those language, literacy, numeracy and employment skills that are essential to performance.
Foundation skills essential to performance are explicit in the performance criteria of this unit of competency.
Range Statement
This field allows for different work environments and conditions that may affect performance. Essential operating conditions that may be present (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) are included. | |
Regulatory framework | The latest version of all legislation, regulations, industry codes of practice and Australian/international standards, or the version specified by the local regulatory authority, must be used, and include one or more of the following: legislative requirements, including work health and safety (WHS) industry codes of practice and guidelines environmental regulations and guidelines Australian and other standards licence and certification requirements All operations to which this unit applies are subject to stringent health, safety and environment (HSE) requirements, which may be imposed through state/territory or federal legislation, and these must not be compromised at any time. Where there is an apparent conflict between performance criteria and HSE requirements, the HSE requirements take precedence. |
Procedures | All operations must be performed in accordance with relevant procedures. Procedures are written, verbal, visual, computer-based or in some other form, include one or more of the following: emergency procedures work instructions standard operating procedures (SOPs) safe work method statements (SWMS) formulas/recipes batch sheets temporary instructions any similar instructions provided for the smooth running of the plant. |
Hazards | Hazards include one or more of the following: electricity structural hazards structural collapse equipment failures industrial (machinery, equipment and product) equipment or product mass noise, rotational equipment or vibration plant services (steam, condensate and cooling water) working at heights, in restricted or confined spaces, or in environments subjected to heat, noise, dusts or vapours flammability and explosivity hazardous products and materials unauthorised personnel sharp edges, protrusions or obstructions slippery surfaces, spills or leaks extreme weather other hazards that might arise |
Routine problems | Routine problems must be resolved by applying known solutions. Routine problems are predictable and include one or more of the following: rat holing and bridging in silos/bins/hoppers routing issues equipment problems solids falling from equipment Known solutions are drawn from one or more of the following: procedures training remembered experience Non-routine problems must be reported according to according to relevant procedures. |
Actions on other abnormal situations | Actions on other abnormal situations include the following: determining problems needing action determining possible fault causes rectifying predictable problems using appropriate solution from procedures following through items initiated until final resolution has occurred reporting problems outside area of responsibility/scope to designated person |
Logs and reports | Logs and reports include one or more of the following: paper or electronic-based logs and reports verbal/radio reports reporting items found which require action |
Load-out equipment | Load-out equipment includes one or more of the following: hoppers, bins or silos conveyors chutes dust extraction equipment and bag houses automated bagging or filling equipment vibratory settling equipment roller conveyors motorised lifting equipment weighing equipment moisture/composition testing equipment |
Solids containments | Solids containments include one or more of the following: bulk bags drums road tankers hopper cars containers sealed bins |
Work requirements | Work requirements come from briefings, handovers and work orders, and include one or more of the following: compliance documentation product specifications nature and scope of tasks achievement targets operational conditions site layout and out of bounds areas worksite inspection requirements lighting conditions plant or equipment defects hazards and potential hazards coordination requirements or issues |
Sectors
Competency Field
Operations