Application
This unit of competency covers the skills and knowledge required to operate an electrochemical process in the metalliferous or chemical industry.
This unit of competency applies to electrochemical processes for the extraction of metals from their ores, such as electrowinning of copper, zinc, nickel and other metals, where the metal is extracted from an ore solution and electrorefining of copper from blister copper, lead, nickel, silver and other metals, where the metal is purified by electroplating pure metal from an intermediate product. It may be applied to other metals and also processes, such as chlorine/caustic soda with appropriate contextualisation.
This unit of competency applies to operations technicians who are required to demonstrate a significant understanding of the process and the equipment operation in order to identify and rectify operational problems, conduct start-up and shutdown and isolation of cells, and operate and monitor equipment.
This unit of competency applies to an individual operating independently in a plant with local control or in liaison with the control room operator in a plant with a centralised control panel, such as distributed control system (DCS) type controls. In the case of large complex plant, the operations technician would be part of a team during start-up and shutdown procedures.
This unit of competency applies to an individual working alone or as part of a team or group and working in liaison with other shift team members and the control room operator, as appropriate.
This unit of competency does not require the operation of a central control panel.
No licensing, legislative or certification requirements apply to this unit at the time of publication.
Elements and Performance Criteria
Elements describe the essential outcomes. | Performance criteria describe the performance needed to demonstrate achievement of the element. | ||
1 | Prepare for work | 1.1 | Receive and give shift handover |
1.2 | Identify work requirements | ||
1.3 | Identify and control hazards | ||
1.4 | Coordinate with appropriate personnel | ||
1.5 | Check for recent work undertaken on electrochemical system | ||
1.6 | Note any outstanding/incomplete work | ||
1.7 | Check operational status of electrochemical system | ||
2 | Operate electrochemical process | 2.1 | Describe the type of electrochemical system, the component plant items and their duties |
2.2 | Complete routine checks, logs and paperwork taking action on unexpected reading | ||
2.3 | Change rate, grade or specification smoothly as required. | ||
2.4 | Adjust solution volume, feed quality, temperatures, electrical current, voltage and production rate, in accordance with procedures | ||
2.5 | Adjust electrochemical system and its component plant items as appropriate to their type and duty to meet production requirements | ||
2.6 | Pull and strip plates/electrodes in accordance with procedures | ||
3 | Diagnose and take action on abnormal situations in accordance with procedures | 3.1 | Monitor electrochemical system and its component plant items frequently and critically throughout shift using measured/indicated data and senses |
3.2 | Describe impacts of any changes upstream and downstream | ||
3.3 | Recognise actual and developing situations which may require action. | ||
3.4 | Apply operational knowledge to resolve problems | ||
3.5 | Take other actions on abnormal situations which cannot be resolved during the shift to ensure safety and the resolution of the situation | ||
3.6 | Follow through items initiated until final resolution has occurred | ||
4 | Isolate and de-isolate electrochemical system and its component plant items | 4.1 | Complete any required pre-start checks |
4.2 | Start up/shut down electrochemical system according to the electrochemical system type and duty in liaison with other personnel | ||
4.3 | Start up/shut down/changeover component plant items within unit according to their type and duty in liaison with other personnel | ||
4.4 | Isolate entire electrochemical system and/or any component plant item | ||
4.5 | Make safe for required work | ||
4.6 | Check electrochemical system /plant item is ready to be returned to service | ||
4.7 | De-isolate and prepare electrochemical system/plant item for return to service |
Evidence of Performance
Evidence required to demonstrate competence in this unit must be relevant to and satisfy the requirements of the elements and performance criteria, and include the ability to:
use data and own senses to monitor plant and maximise performance
adjust feeds, composition and rate, gas flows and temperatures to meet product requirements
perform pre-start checks, start-up/shutdown procedures, and isolations and de-isolations
identify early warning signs of equipment/processes needing attention or with potential problems and take action
identify hazards and risks and apply risk control procedures.
Evidence of Knowledge
Evidence must be provided that demonstrates knowledge of:
all items on a schematic of the system and functions of each
principles of operation of electrochemical process and ancillary equipment
process-specific science (physics, chemistry and biochemistry) to the level of being able to interpret the science and extract factors controlling the process and product, and by-product production rate and quality (e.g. for chemistry interpret the equation for factors controlling rate and yield and also interfering reactions and by-products)
systems’ operating parameters, integrity limits, product tolerances, limitations and specifications, temperature, flow and electrical parameters
function and troubleshooting of major components and their problems
hierarchy of control
hazards that may arise in the job/work environment, and:
their possible causes
potential consequences
appropriate risk controls.
Assessment Conditions
The unit should be assessed holistically and the judgement of competence based on a holistic assessment of the evidence.
The collection of performance evidence:
should occur over a range of situations which include typical disruptions to normal, smooth operations
will typically include a supervisor/third-party report focusing on consistent performance and problem recognition and solving. A supervisor/third-party report must be prepared by someone who has a direct, relevant, current relationship with the person being assessed and who is in a position to form a judgement on workplace performance relevant to the unit of competency
must include the use of industrial type electrochemical processing equipment allowing for operation
may use industry-based simulation for part of the unit particularly where safety, lack of opportunity or significant cost is an issue.
Assessment should occur in operational workplace situations. Where this is not possible, or where personal safety or environmental damage are limiting factors, assessment must occur in a sufficiently rigorous simulated environment reflecting realistic operational workplace conditions. This must cover all aspects of workplace performance, including environment, task skills, task management skills, contingency management skills and job role environment skills.
Assessment in a simulated environment should use evidence collected from one or more of:
walk-throughs
pilot plant operation
demonstration of skills
industry-based case studies/scenarios
‘what ifs’.
Knowledge evidence may be collected concurrently with performance evidence (provided a record is kept) or through an independent process, such as workbooks, written assessments or interviews (provided a record is kept).
Assessment processes and techniques must be appropriate to the language, literacy and numeracy requirements of the work being performed and the needs of the candidate.
Conditions for assessment must include access to all tools, equipment, materials and documentation required, including relevant workplace procedures, product and manufacturing specifications associated with this unit.
The regulatory framework will be reflected in workplace policies and procedures and is not required to be independently assessed.
Foundation skills are integral to competent performance of the unit and should not be assessed separately.
Assessors must satisfy the assessor competency requirements that are in place at the time of the assessment as set by the VET regulator.
In addition, the assessor or anyone acting in subject matter expert role in assessment must demonstrate both technical competency and currency. If the assessor cannot demonstrate technical competency and currency they must assess with a subject matter expert who does meet these requirements.
Technical competence can be demonstrated through one or more of:
relevant VET or other qualification/Statement of Attainment
appropriate workplace experience undertaking the type of work being assessed under routine and non-routine conditions
appropriate workplace experience supervising/evaluating the type of work being assessed under routine and non-routine conditions
Currency can be demonstrated through one or more of:
being currently employed undertaking the type of work being assessed
being employed by the organisation undertaking the type of work being assessed and having maintained currency in accordance with that organisation’s policies and procedures
having consulted/had contact with an organisation undertaking the type of work being assessed within the last twelve months, the consultation/contact being related to assessment
conducting on-the-job training/assessments of the type of work being assessed
being an active member of a relevant professional body and participating in activities relevant to the assessment of this type of work.
Foundation Skills
This section describes those language, literacy, numeracy and employment skills that are essential to performance.
Foundation skills essential to performance are explicit in the performance criteria of this unit of competency.
Range Statement
This field allows for different work environments and conditions that may affect performance. Essential operating conditions that may be present (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) are included. | |
Regulatory framework | The latest version of all legislation, regulations, industry codes of practice and Australian/international standards, or the version specified by the local regulatory authority, must be used, and include one or more of the following: legislative requirements, including work health and safety (WHS) industry codes of practice and guidelines environmental regulations and guidelines Australian and other standards licence and certification requirements All operations to which this unit applies are subject to stringent health, safety and environment (HSE) requirements, which may be imposed through state/territory or federal legislation, and these must not be compromised at any time. Where there is an apparent conflict between performance criteria and HSE requirements, the HSE requirements take precedence. |
Hazards | Hazards include one or more of the following: electricity gas structural hazards structural collapse equipment failures industrial (machinery, equipment and product) equipment or product mass noise, rotational equipment or vibration plant services (steam, condensate and cooling water) working at heights, in restricted or confined spaces, or in environments subjected to heat, dusts or vapours fire and explosion hazardous products and materials unauthorised personnel sharp edges, protrusions or obstructions slippery surfaces, spills or leaks extreme weather other hazards that might arise |
Routine problems | Routine problems are predictable and have known solutions and include one or more of the following: variations in feed material control of temperature control of feed rates and composition of feeds control of impurities, waste material and irregularities |
Non-routine problems | Non-routine problems are unexpected problems, or variations of previous problems and must be resolved by applying operational knowledge to develop new solutions, either individually or in collaboration with relevant experts, to: determine problems needing action determine possible fault causes develop solutions to problems which do not have a known solution follow through items initiated until final resolution has occurred report problems outside area of responsibility to designated person Operational knowledge includes one or more of the following: procedures training technical information, such as journals and engineering specifications remembered experience relevant knowledge obtained from appropriate people |
Start up/shut down | Start up shut down includes the following: start up and shut down to/from normal operating conditions start up and shut down to/from isolated, cold or empty start up and shut down to/from other conditions/situations experienced on the plant |
Procedures | All operations must be performed in accordance with relevant procedures. Procedures are written, verbal, visual, computer-based or in some other form, include one or more of the following: emergency procedures work instructions standard operating procedures (SOPs) safe work method statements (SWMS) formulas/recipes batch sheets temporary instructions any similar instructions provided for the smooth running of the plant |
Operate | Operate is to monitor, adjust/make change to the production unit and/or its component items to meet specifications, by one or both of the following: manually in the plant using local controller in the plant |
Product | Product includes anything produced by a process step and so includes: intermediate products, such as the product from one process step, which then becomes the feed for another |
Logs and reports | Logs and reports include one or more of the following: paper or electronic-based logs and reports verbal/radio reports reporting items found which require action |
Work requirements | Work requirements will be identified from one or more of the following: briefings handovers and orders compliance documentation product specifications nature and scope of tasks achievement targets operational conditions lighting conditions plant or equipment defects hazards and potential hazards coordination requirements or issues |
Sectors
Competency Field
Operations