Application of this unit
This competency applies to advanced operators who are required to apply knowledge of materials, product purpose and processes to the operation of wire bunching and stranding equipment. The key factors are the production of material meeting quality standards and product requirements and the recognition and resolving of a range of routine and non-routine problems.
The operator will:
plan the job
identify hazards and take appropriate action
start up and shut down wire bunching and stranding equipment
monitor equipment operation and correct process variations for materials, equipment or process variations and make appropriate adjustments
discard non-conforming products
solve routine and non-routine wire drawing equipment and process problems
complete logs and reports.
Prerequisites
This unit has no prerequisites.
ELEMENT ELEMENT | PERFORMANCE CRITERIA Performance criteria describe the required performance needed to demonstrate achievement of the element. Assessment of performance is to be consistent with the evidence guide. |
1. Plan own work requirements. | 1.1 Identify equipment and processes used for production process and upstream and downstream operations from production plan or requests. 1.2 Identify materials required. 1.3 Recognise hazards and take appropriate action. 1.4 Identify and check emergency stops, guards and controls 1.5 Identify requirements for materials, quality, production and equipment checks. 1.6 Identify materials, waste management and housekeeping needs. |
2. Check wire bunching and stranding process set-up. | 2.1 Determine equipment requirements. 2.2 Set process to specifications as required. 2.3 Select appropriate dies (number and sizes) and arrange in correct production sequence. 2.4 Check wire bunching and stranding equipment settings and adjustments, including tension, die number, sizes and threading arrangements, are as required. 2.5 Check materials are correct. 2.6 Discard, or make adjustments to the process for, non-conforming materials. 2.7 Set up date, batch and materials markings to specifications, as required. 2.8 Complete other pre-start checks to procedures. |
3. Operate wire bunching and stranding process to procedures. | 3.1 Set up wire bunching and stranding equipment as required. 3.2 Load materials. 3.3 Start up equipment and make adjustments to reach required settings. 3.4 Monitor controls/displays/terminals for production/process data. 3.5 Monitor product/process quality. 3.6 Maintain continuity of process. 3.7 Make adjustments to remedy faults and nonconformities as required. 3.8 Collect and reprocess/discard scrap/trim and other materials. 3.9 Complete required workplace documentation/ records. 3.10 Clean, adjust and lubricate equipment as required. 3.11 Pause or stop equipment in an emergency, as required. |
4. Shut down equipment to procedures. | 4.1 Shut down equipment as required. 4.2 Complete equipment cleanup, adjustments and waste management. 4.3 Place suitable guards, locks and notices to prevent inadvertent start-up. |
5. Anticipate and solve problems. | 5.1 Recognise a problem or a potential problem. 5.2 Determine problems needing priority action. 5.3 Refer problems outside area of responsibility to appropriate person, with possible causes. 5.4 Seek information and assistance as required to solve problems. 5.5 Solve problems within area of responsibility. 5.6 Follow through items initiated until final resolution has occurred. |
This describes the essential skills and knowledge and their level required for this unit.
Application of knowledge of the materials, equipment and process sufficient to recognise material and equipment conditions which may lead to out-of-specification production.
Knowledge of organization procedures and relevant regulatory requirements along with the ability to implement them within appropriate time constraints and work standards.
Application of the knowledge of managing risks using the hierarchy of controls applied to the wire bunching and stranding process. Application of approved hazard control, safety procedures, the use of PPE in relation to handling materials, equipment operation and cleanup.
Knowledge as a basis for solving processing and material problems, including:
products, materials and material characteristics
wire bunching and stranding manufacturing processes
function of wire bunching and stranding equipment, equipment components and ancillary equipment
why multiple strand wires are used and the purpose of armouring and annealing wires
the changes in materials in each stage of the production process
behaviour of materials in relation to speed, temperature and tension
changes to materials in wire bunching and stranding manufacturing process
waste management and importance of non-conforming materials
opportunities to re-use and recycle waste materials
wire properties and their interactions with process conditions
relationships between wire properties and process conditions
changes to wire properties to better suit process requirements.
product problems related to wire properties
product problems related to process conditions
adjustments to process conditions to meet wire and product requirements.
Competence also includes the ability to:
plan own work, including predicting consequences and identifying improvements
take measurements when required and identify product out of specification
identify and describe own role and role of others involved directly in the process
identify factors which may affect product quality or production output and appropriate remedies
identify when the operator is able to rectify faults and when assistance is required.
Language, literacy and numeracy requirements
This unit requires the ability to read and interpret typical product specifications, job sheets and material labels as provided to operators.
Writing is required to the level of completing workplace forms and production reports.
Basic numeracy is required, eg to determine how many 2 kg, 3 kg and 5 kg bags are needed to make up a requirement for 50 kg.
The Evidence Guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, the range statement and the assessment guidelines for this training package.
Overview of assessment
A holistic approach should be taken to the assessment.
Assessors must be satisfied that the person can consistently perform the unit as a whole, as defined by the Elements, Performance Criteria and skills and knowledge.
Critical aspects for assessment and evidence required to demonstrate competency in this unit
It is essential that competence is demonstrated in the knowledge and skills defined in this unit. These may include the ability to:
identify critical materials properties and wire bunching and stranding process characteristics in relation to the process requirements and the end product
plan own work process within workplace procedures and explain the reasons for the steps in the process
take appropriate action to observe equipment, materials and products for out of specification results, make adjustments and identify problems to be reported.
Consistent performance should be demonstrated. For example, look to see that:
production quality and output standards are met consistently
problems are anticipated from process observations
problems are efficiently resolved
the process runs consistently and smoothly.
Assessment method and context
Assessment will occur on industrial wire bunching and stranding equipment in a work-like environment.
Competence in this unit may be assessed:
by using appropriate, industrial bunching and stranding equipment
in a situation allowing for the generation of evidence of the ability to respond to problems
by using a suitable simulation and/or a range of case studies/scenarios
through a combination of these techniques.
In all cases it is expected that practical assessment will be combined with targeted questioning to assess the underpinning knowledge and theoretical assessment will be combined with appropriate practical/simulation or similar assessment. Assessors need to be aware of any cultural issues that may affect responses to questions.
Assessment processes and techniques must be culturally appropriate and appropriate to the oracy, language and literacy capacity of the assessee and the work being performed.
Specific resources for assessment
This section should be read in conjunction with the Range Statement for this unit of competency. Resources required include suitable access to an operating plant or equipment that allows for appropriate and realistic simulation. A bank of case studies/scenarios and questions will also be required to the extent that they form part of the assessment method. Questioning may take place either in the workplace, or in an adjacent, quiet facility such as an office or lunchroom. No other special resources are required.
Access must be provided to appropriate learning and/or assessment support when required. Where applicable, physical resources should include equipment modified for people with disabilities.
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Add any essential operating conditions that may be present with training and assessment depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts.
Where reference is made to industry codes of practice, and/or Australian/international standards, the latest version must be used.
Context
This competency applies to all wire bunching and stranding within the plastics, rubber and cablemaking industries. It covers single and multiple stranded cable. It includes the operation of all relevant additional equipment where that equipment is integral to the wire bunching and stranding process.
Procedures
All operations are performed in accordance with procedures.
Procedures include all relevant workplace procedures, work instructions, temporary instructions and relevant industry and government codes and standards.
Tools and equipment
This competency includes use of equipment and tools such as:
wire bunching and stranding equipment and components, including dies, threading path, spools, gears
associated equipment, including manual handling equipment, welders, lubrication system, packaging, measuring equipment
hand tools used in production process
relevant personal protective equipment.
Hazards
Typical hazards include:
temperature
wire breakages
hazardous materials
manual handling hazards
equipment operations.
Problems
'Anticipate and solve problems' means resolve a wide range of routine and non-routine problems, using product and process knowledge to develop solutions to problems which do not have a known solution/a solution recorded in the procedures.
Typical process and product problems may include:
processing problems (eg incorrect diameter, ovality, surface appearance, colour, inclusions, elongation, tensile strength, weight, wrap)
equipment malfunctions (eg wire breaks - raw material contamination, die wear, die build-up, faulty capstan bands, faulty wire welds)
materials problems (eg raw material contamination, incorrect quantity of materials).
Variables
Key variables to be monitored include:
equipment operating speed
time
tension
wind off speed
product integrity and general conformance to specification/sample.
Not applicable.
The required outcomes described in this unit contain applicable Employability Skills. The Employability Skills Summary of the qualification(s) in which this unit is packaged will assist in identifying Employability Skill requirements.
Not applicable.