PMC553072B
Model fibrous plaster products

This unit of competency covers the skills and knowledge required to make a model of a final fibrous plaster product which may be used as a prototype or as a basis for the later production of the item.

Application

This unit of competency applies to plaster modellers who are responsible for producing from, sections, samples or designs, a variety of specialty fibrous plaster products which may include non-standard geometric shapes, architectural renovation, restoration and/or replication of existing features.

This competency is generally performed by an experienced modeller or a trainee modeller under supervision.


Elements and Performance Criteria

ELEMENT

PERFORMANCE CRITERIA

1. Determine work piece to be produced

1.1. Discuss required attributes of the work piece with supervisor or as appropriate the client

1.2. Determine dimensions and geometry of the work piece

1.3. Identify the profile, pattern and specific features required to be replicated

1.4. Establish and/or plan fixing or anchoring points and the best way to facilitate this in the work piece

1.5. Plan the production method and determine materials and equipment needs.

2. Set up work area and equipment

2.1. Establish work area including anchor points for slides or screeds as necessary

2.2. Develop templates required to produce the work piece

2.3. Mark out the correct dimensions and work piece geometry and check against templates or slide radii

2.4. Establish and position any support materials required to develop and sustain the work piece during production

2.5. Position any lifting or anchoring materials and check that these do not inhibit templates or screeds

2.6. Test the functionality of the slides and ensure that all parts of the proposed work piece can be accessed

3. Generate profile of required work piece

3.1. Produce a segment of the desired profile and ensure that this matches the requirements of the original design

3.2. Mount the sample to facilitate replication or to produce appropriate surface detail on the work piece

3.3. Lubricate the sample for replication and the supporting work plate to facilitate ease of stripping of the completed work piece

4. Produce work piece

4.1. Set up the supporting material in a manner which avoids interference with the screed or template

4.2. Prepare plaster mix and ensure fibre strand is available

4.3. Build up rough outline of the work piece adding fibre as the process proceeds

4.4. Form up the desired shape by moving the sample, template or mould to facilitate development of the desired profile or by screeding off

4.5. Build in anchor points or reinforcing at desired positions as the work proceeds

4.6. Hollow out the work piece to minimise the mass of the object, as appropriate

4.7. Check the profile to ensure compliance with the desired product

4.8. Check the work piece for dimensional accuracy

5. Strip and inspect completed work piece

5.1. Remove any external supports from the work piece after the plaster has dried

5.2. Dismantle slides if used

5.3. Clean and put away tools and fitments used in the production process

5.4. Remove the work piece and inspect for errors, damage or porosity

5.5. Clean up any excrescences and remove any waste material

5.6. Coat the surface of the finished product according to organisational requirements to protect the surface

5.7. Remove finished product to storage and shipment

6. Control hazards

6.1. Identify hazards during the process or within the work area

6.2. Assess the risks arising from those hazards

6.3. Implement measures to control those risks in line with procedures and duty of care

7. Respond to problems

7.1. Identify possible problems in equipment or process

7.2. Determine problems needing action

7.3. Determine possible fault causes

7.4. Rectify problem using appropriate solution within area of responsibility

7.5. Follow through items initiated until final resolution has occurred

7.6. Report problems outside area of responsibility to designated person

Required Skills

Required skills

Required skills include:

using and maintaining all required materials, tools and parts

recognising situations which could cause production problems and taking appropriate action

implementing enterprise's procedures and relevant regulatory requirements within appropriate time constraints and in a manner relevant to the production of fibrous plaster products

diagnosing and solving problems involved in the work

communicating effectively with team members, management and in some cases, clients

reading and numeracy to interpret workplace documents and technical information

Required knowledge

Required knowledge includes:

specified quality standards

characteristics of different materials

requirements from drawings, specifications or job sheets

distinguish between causes of faults such as:

materials faults

dimensional inaccuracies

inappropriate allowance for material shrinkage

Evidence Required

The Evidence Guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.

Overview of assessment

The unit will be assessed in as holistic a manner as is practical and may be integrated with the assessment of other relevant units of competency.

Critical aspects for assessment and evidence required to demonstrate competency in this unit

Competence must be demonstrated in the ability to recognise situations requiring action and then in implementing appropriate corrective action. Consistent performance should be demonstrated. In particular look to see that:

OHS requirements are met

quality improvement techniques are applied

emergency procedures are understood and applied

waste is minimised.

Context of and specific resources for assessment

Assessment will require access to an operating plant over an extended period of time, or a suitable method of gathering evidence of operating ability over a range of situations.

Assessment will occur over a range of situations which will include disruptions to normal, smooth operation.

Simulation or case studies/scenarios may be required to allow for timely assessment of parts of this unit of competency. Simulation should be based on the actual plant and will include 'walk-throughs' of the relevant competency components. A bank of scenarios/case studies/what ifs and questions will be required to probe the reasoning behind observable actions.

Method of assessment

In all plants it may be appropriate to assess this unit concurrently with relevant teamwork and communication units.

Guidance information for assessment

Assessment processes and techniques must be culturally appropriate and appropriate to the language and literacy capacity of the candidate and the work being performed.


Range Statement

The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.

Procedures

All operations are performed in accordance with standard procedures and work instructions

Products

Products may include:

ornamental castings including scotias, cornices and arches

centre pieces (both reinforced and un-reinforced)

ornamental recessed panels

Equipment and unit operations

This unit of competency includes all such items of equipment and unit operations which form part of the modelling process. These may include:

slides

templates

reinforcing materials

separation agents

lifting equipment (for large work)

Fibre

Fibre may be glass fibre or other appropriate fibre

Typical problems

Typical problems may include:

incorrect calculations or setting out

inappropriate plaster mixtures

variations in ambient temperature

inappropriate placement of reinforcing or anchor points

Occupational health and safety (OHS)

The identification and control of hazards and the application of OHS is to be in accordance with current, applicable legislation and regulations, and company procedures. All work is carried out at all times in accordance with these requirements


Sectors

Unit sector

Operational/technical


Employability Skills

This unit contains employability skills.


Licensing Information

Not applicable.